Products/Services:
 Click on a category to see this company's product/service line for the chosen category. 
  
 
Contact Details:
 PhoneSee Phone No 
   
E-mailE-mail Company
 Computer and GlobeVisit Website 
 
River Front Abrasive Co.Cincinnati, OH
 * NOTE: Click on an image to enlarge it in a new window. 
  
Blueprint  Request Quote
 
   
 Sanding Sponges from 1/4" thick to 1" thick. Single sided, doulble sided and 4 sided.
Abrasive SPonges with Angles.
Blueprint  Request Quote
 
   
 Blue Shop Rolls that are Aluminum Oxide "J" wgt. Waterproof cloth.
Available in 1", 1-1/2" & 2" widths. All are 50 yds long.
Blueprint  Request Quote
 
   
 Cartridge Rolls in any size. Straights, Full Tapers, Half Tapers & Sidewalls.
From grit 24 - 400 in Aluminum Oxide Resin Bond.
In grits 40 - 400 in Aluminum Oxide Glue Bond.
Also available in Zirconium and Silicon Carbide.
Blueprint  Request Quote
 
   
 Chose RIver Front Abrasive Comapny for a complete line of coated abrasives available in Aluminum Oxide, Silicon Carbide, Zirconium, Garnet, Emery, Flint or Crocus (Iron Oxide) with paper, cloth or fibre backings, each with a different bonding system.
Blueprint  Request Quote
 
   
 Cross Pads design allows to see through the abasives while it's in motion. Ideal for either stock removal or polishing and finishing of cylinders and tubing.
Aluminum Oxide "X" wgt. Resin Bond. Available in sizes from 3/4" to 6" diameters.
Available in 8 or 10 ply.
Blueprint  Request Quote
 
   
 Paper of Cloth cut rolls. From 1/8" wide to 56 " in width. Lenghts available in 5, 10, 20, 25, 50 or 100 yard rolls. Available in Aluminum Oxide, Silicon Carbide, Zirconium, Emery, Crocus and Garnet as Commutator Rolls.
Blueprint  Request Quote
 
   
 Aluminum Oxide Resin Bonded Flap Wheels segmented with 1/4" wide segments allowing the Flap Wheel to conform to most any contour. Straight 1/4" shank. Diameters in 2", 2-1/2", & 3" and widths in 1", 1-1/2" & 2".
Blueprint  Request Quote
 
   
 Floor sanding rolls in grits from 12 to 120. Any width roll needed can be cut. Regular stock sizes are 8", 10" & 12". Heavy duty Silicon Carbide grain in an "E" wgt and Combination paper.
Blueprint  Request Quote
 
   
 Minature Flap Wheels with an 1/8" shank. Flush ends allow to get into tighter areas. Great for Dremel sanders.Available starting at 3/8" diameter to 1-3/16". Premium Aluminum Oxide Resin Bond material.
Blueprint  Request Quote
 
   
 Premium Aluminum Oxide Resin Bonded Flap Wheels with 1/8" and 1/4" straight shanks. Also available with a 1/4"-20 threaded shank. Flush ends allow to get into tighter areas.
Blueprint  Request Quote
 
   
 Polishing Bob's are specially designed for the use of polishing the I.D. of stainless tubing. Sizes starting at 1/2" I.D. Tube size to 5" I.D.
Grits range from 60 to 320 using a premium Aluminum Oxide Resin Bond Cloth.
Blueprint  Request Quote
 
   
 Detail Triangles are available in H&L or PSA. With or without vacuum holes. A variety of materials are available. Just specify the manufacture of the tool.
Blueprint  Request Quote
 
   
 Pressure Sensitive Rolls (PSA) are available in Aluminum Oxide "X" wgt Resin Bond and "J" wgt Glue Bond Cloth and "E" wgt Resin Paper. Additional materials available upon request.
Blueprint  Request Quote
 
   
 2-1/2" and 3-1/4" PSA refill paper rolls. For use in 3m roll hand sander.
Available in Aluminum Oxide "C" wgt. paper or Silicon Carbide "B" wgt Paper.
Both with a stearate coating which resists loading. Ideal for sanding wood,
metal, paint, primer, fiberglass & plastic.
Blueprint  Request Quote
 
   
 4-1/2 X 10 yard or 2-3/4 X 45 yard PSA paper rolls.
Available in Aluminum Oxide "C" wgt. paper or Silicon Carbide "B" wgt Paper.
Both with a stearate coating which resists loading. Ideal for sanding wood,
metal, paint, primer, fiberglass & plastic.
Blueprint  Request Quote
 
   
 PSA cloth ans paper sheets. Available in full 9 X 11 sheets or cut to any size required such as 1 X 11, 4-1/2 X 5-1/2, 2-3/4 X 16-1/2 etc...
Plastic holders for the 1 X 11 strips are available. Fold the strips over to cover give a double sided sanding tool.
Blueprint  Request Quote
 
   
 Rubber Abrasive Sanding Blocks. Made using a special resilent rubber with hard abrasive grit. The grit is evenly distributed through the block so that a constant
finish is imparted throughout the life of the tool, unlike abrasive clothes and papers which become finer in use.
Blueprint  Request Quote
 
   
 Flexible Cloth Sanding Stars. Aluminum Oxide "J" Resin Bond.
Edges break down creating a mop like effect. Excellent for sanding, scuffing
& blending wood and metal contours and even flat surfaces.
Ideal for all hard to sand areas.
Blueprint  Request Quote
 
   
 Sandscreen (Mesh) Cloth Rolls. Silicon Carbide Waterproof material double coated
making both sides usable. Ideal for plumbing jobs, drywall sanding and anywhere loading is a problem. 25 yard rolls available in any width from 1" to 46"
Blueprint  Request Quote
 
   
 Sandscreen (Mesh) Cloth Rolls. Silicon Carbide Waterproof material double coated
making both sides usable. Ideal for plumbing jobs, drywall sanding and anywhere loading is a problem. Precut sheets for drywall sanding and 9 X 11 sheets in stock.
Blueprint  Request Quote
 
   
 Full size 9 x 11 sheets or cut sheets to any size sander. Sheets larger than 9 x 11 can be special cut. Material available in Aluminum Oxide, Silicon Carbide, Emery, Garnet, Crocus or Zirconium. Sheets for most any application on Metal, Wood, Fiberglass, Plastic, Glass, Leather or Rubber.
Blueprint  Request Quote
 
   
 Aluminum Oxide "J" Resin/Glue Cloth. Available in two forms of packaging. Most widely used square boxes with 2 sides open or in round spool type packaging. Shorter length rolls available for carrying in tool boxes.
Blueprint  Request Quote
 
   
 Slashed Assemblies for replacement loadings in brush heads. Available in most any slash patterns. Materials include Aluminum Oxide in "X" , "J" & Waterproof Cloths or Silicon Carbide in "X" Resin or Waterproof Cloths.
Blueprint  Request Quote
 
   
 Slashed Rolls for making your own loadings or for hand sanding contours while turning on a lathe.
Blueprint  Request Quote
 
   
 Premium Spiral bands also known as No Lap Bands. Sizes from 1/4" to 6" diameter with any length to 36 ". Expanding Rubber Drums available with 1/8", 1/4" & 3/8" shanks.
Blueprint  Request Quote
 
   
 As the corners of Square Pads wear down it exposes a fresh layer of abrasive layer after layer. Square corners allow for see through while grinding on work piece. Excellent for quick grind/blending of channels, fillets, corners or spotting flat surfaces.
Blueprint  Request Quote
 
   
 Large Unmounted Flap Wheels. Diamaters from 3-1/2" to 12" in 1", 1-1/2" or 2" widths.
Grits from 40 to 320. Aluminum Oxide "X" Resin Bond Poly/Cotton mateial.
Blueprint  Request Quote
 
 
New Search