Ball Plungers by Carr Lane Mfg. Co.

Products/Services:

	Click on a category to see this company's product/service line for the chosen category.
	Clamps Edge Hold-Down Pneumatic Swing Vise Jaws Chuck Lock Pins Ball Pins Alignment Clamping Detent Expanding Jig L Shoulder T Plungers Ball Hand-Retractable Index Spring Toggle Clamps Horizontal-Handle Latch-Action Push-Pull Vertical-Handle

Contact Details:

		See Phone No

		E-mail Company
		Visit Website

Carr Lane Mfg. Co.

St. Louis, MO

	* NOTE: Click on an image to enlarge it in a new window.
		BALL PLUNGERS FEATURES: Self-contained ball-and-spring device available in many sizes and forces. Locking element holds the unit securely in place after installation. Install and/or adjust from either end (when using the slot at the ball end, install with a Plunger Wrench to avoid over-compressing the spring). Note: the three smallest sizes have no slot at the ball end. Available in steel or stainless steel. SIZES (STEEL): Available in thread sizes from #4-48 to 5/8-11 (M4 to M12 in metric). Choice of light, medium, or heavy force in most thread sizes. SIZES (STAINLESS): Available in thread sizes from #4-48 to 5/8-11 (M4 to M12 in metric). Choice of light, medium, or heavy force in most thread sizes. MATERIAL (STEEL — USA): Body > 12L14 steel, zinc plated clear chromate, zinc plated yellow chromate, or black oxide finish, depending on the spring force. (300-series stainless on the smallest five sizes). Ball > 440C stainless. Spring > Music wire (302 stainless on the smallest five sizes). Locking element > Nylon 101 (locking patch on small sizes). MATERIAL (STEEL — METRIC): Body > 12L14 steel, zinc plated clear chromate. Ball > 440C stainless. Spring > Music wire. Locking element > Nylon 101 (locking patch on small sizes). MATERIAL (STAINLESS): Body > 300-series stainless. Ball > 440C stainless. Spring > 302 stainless. Locking element > Nylon 101 (locking patch on small sizes). Request Quote

		BALL PLUNGERS FEATURES: Stainless steel ball plunger with a Delrin® ball. Self-contained ball-and-spring device available in many sizes and forces. Locking element holds the unit securely in place after installation. Install and/or adjust from either end (when using the slot at the ball end, install with a Plunger Wrench to avoid over-compressing the spring). Note: the three smallest sizes have no slot at the ball end. SIZES: Available in thread sizes from #4-48 to 5/8-11. Choice of light, medium, or heavy force in most thread sizes. MATERIAL: Body > 300-series stainless. Ball > White Delrin® 500. Spring > 302 stainless. Locking element > Nylon 101 (locking patch on small sizes). Request Quote

		PRESS-FIT BALL PLUNGERS Additional Sizes Now Available! FEATURES: Simple, economical ball plunger ideal for installation in softer materials, such as aluminum, wood, or plastic. Use when a threaded hole would be impractical or when adjustment is not required. Sturdy shoulder provides a fixed seating position and positively resists detent force. Installation hole can be counterbored to recess the shoulder. Available in steel or stainless steel. SIZES: Available in six body sizes from 1/8" diameter to 1/2" diameter. Choice of light or heavy force in each size. MATERIAL (STEEL): Body > 12L14 steel, black oxide finish. Ball > 440C stainless. Spring > Music wire. MATERIAL (STAINLESS): Body > 300-series stainless. Ball > 440C stainless. Spring > 302 stainless. Request Quote

		PRESS-FIT BALL PLUNGERS Additional Sizes and Delrin Balls Now Available! FEATURES: Simple, economical ball plunger ideal for installation in softer materials, such as aluminum, wood, or plastic. Use when a threaded hole would be impractical or when adjustment is not required. Sturdy shoulder provides a fixed seating position and positively resists detent force. Installation hole can be counterbored to recess the shoulder. Available in steel or stainless steel. SIZES: Available in six body sizes from 1/8" diameter to 1/2" diameter. Choice of light or heavy force in each size. MATERIAL (STEEL): Body > 12L14 steel, black oxide finish. Ball > White Delrin 500. Spring > Music wire. MATERIAL (STAINLESS): Body > 300-series stainless. Ball > White Delrin 500. Spring > 302 stainless. Request Quote

		BALL DETENTS FEATURES: Press-in receptacle that provides a perfect mating hole for a Ball Plunger. Hole has a 90° point for smooth detent action and reliable retention. These hardened Ball Detents resist side loads to prevent wear to the parent material. SIZES: Available in sizes to fit all Ball Plungers, from #4-48 to 5/8-11 (M4 to M12 in metric). MATERIAL: 440C stainless, heat treated. Request Quote

		PLUNGER WRENCHES FEATURES: Handy tool to speed up installation of Ball Plungers or Spring Plungers. Much better than using a screwdriver on the ball/nose end, because the clearance hole in the center prevents over-compressing the plunger's internal spring. SIZES: Available in sizes to fit all Ball Plungers and Spring Plungers, from #4-48 to 1-8 (M4 to M12 in metric). MATERIAL: Steel. Request Quote