 | Products/Services: |  |
| Click on a category to see this company's product/service line for the chosen category. | ||
 |  |
| MERCRON Inc | Richardson, TX | |
| * NOTE: Click on an image to enlarge it in a new window. | |||
.jpg) | FLUORESCENT LAMP CONTROLLERS MERCRON’s Fluorescent Lamp Controllers are categorized into series per 6 power-levels in terms of milliamps. Since Fluorescent light-sources are linear, a milliamp rating gives a better idea of the lamp’s illumination per unit length than does a total wattage figure. Wattage will change with lamp length alone, but milliamps will not. All models have the following: • Precision Control Regulation within ¼% of set value of intensity * • Real-time Light Feedback • Response Interval of .5 mS • Remote Control Capability • Sinusoidal Drive Frequency • All’s Well SIGNAL • 95% Efficiency • Can be specified as either120 VAC or 230 VAC *(Due to their extra high variability range, High Ratio (HR) units have 1% or better Regulation). | ||
.jpg) | At least 40 different, ordinary fluorescent lamps can be regulated by the MERCRON Lamp Controller, including: Ultra-Violet, InfraRed, Octron, and Germicidal. Lamp manufacturers typically classify their lamps according to the lamp’s diameter: T5's, T8's, & T12's with T = _”. (T9's are primarily Circular / Ring lamps). They also classify their lamps according to 3 performance output levels: Standard - 400mA; High output - 800 mA; and Very High output - 1500 mA. MERCRON’s Fluorescent Lamp Controllers range from 400 peak milliamp output to 2300 mA output. This ability to “overdrive” the lamp or to safely idle the lamp - “underdrive” it - without burning up the anodes was unheard of before MERCRON. MERCRON’s Fluorescent Lamp Controllers can: • regulate anywhere from 1- to - 4 lamps per controller; • regulate up to 192" of lamps, depending upon model; • vary the lamp’s output anywhere from 3-to-38:1, depending upon the series. | ||
.jpg) | METAL HALIDE LAMP CONTROLLERS MERCRON’s Metal Halide Lamp Controllers can regulate several different wattage-levels of Metal Halide light-sources: 250, 400 & a 1000 watts. All models have the following: • Precision Control Regulation within ¼% of set value of intensity • Real-time Light Feedback • Response Interval of .5 mS • Remote Control Capability • Sinusoidal Drive Frequency • All’s Well SIGNAL • 95% Efficiency • Can be specified as either120 VAC or 230 VAC | ||
.jpg) | HP SODIUM LAMP CONTROLLERS MERCRON’s HP Sodium Lamp Controllers can regulate several different wattage-levels of high pressure Sodium light-sources: 150, 250 & 400 watts. All models have the following: • Precision Control Regulation within ¼% of set value of intensity • Real-time Light Feedback • Response Interval of .5 mS • Remote Control Capability • Sinusoidal Drive Frequency • All’s Well SIGNAL • 95% Efficiency • Can be specified as either120 VAC or 230 VAC | ||
.jpg) | TUNGSTEN / HALOGEN LAMP CONTROLLERS MERCRON’s Tungsten Lamp Controllers regulate several different wattage-levels of Tungsten light-sources: 50, 75, 100, 150, 240, 250, 300 & 500 watts. All models have the following: • Precision Control Regulation within ¼% of set value of intensity • Real-time Light Feedback • Response Interval of 30 mS (above 20% power) • Remote Control Capability • Sinusoidal Drive Frequency • All’s Well SIGNAL • 95% Efficiency • Can be specified as either120 VAC or 230 VAC | ||
Request Quote
View Literature | |
 |
