Pressure Transducers by Campbell Scientific, Inc.

Products/Services:

	Click on a category to see this company's product/service line for the chosen category.
	Analyzers Gas Anemometers Data Acquisition Systems Data Collection Systems Data Loggers Encoders Shaft Hygrometers Probes Current Humidity pH Temperature Thermocouple Pyranometers Radiometers Resistance Temperature Detectors (RTDs) Sensors Air Velocity Conductivity Current Dissolved Oxygen Distance Electric Field Flow Gas GPS Heat Flux Humidity Moisture pH Position Precipitation Pressure Quantum Turbidity Water Wind Temperature Sensors Air RTD Soil Surface Thermistor Thermocouple Water Thermocouples Type E Transducers Pressure

Contact Details:

		See Phone No

		E-mail Company
		Visit Website

Campbell Scientific, Inc.

Logan, UT

	* NOTE: Click on an image to enlarge it in a new window.
		CS408 The CS408 is a submersible pressure transducer manufactured by Pressure Systems to measure surface water, ground water, or hostile fluid levels. Each transducer is individually calibrated, and ships with a calibration sheet. The sheet specifies I/O conditions, as well as actual data reflecting the unit’s static accuracy and thermal characteristics. A vent tube, which runs the entire length of the cable, vents to the atmosphere so the measurements do not have to be corrected for barometric pressure. Request Quote View Literature

		CS420 The CS420 submersible pressure transducer is manufactured by Druck for use in surface, ground water, or hostile fluid applications. Changes in water level correspond to pressure changes on a strain gage bonded to a pressure-sensitive diaphragm. When a precision excitation voltage is applied, the electrical resistance varies with changing liquid pressure. Our dataloggers supply the excitation voltage and measure resistance, then convert the measured value to the desired units (i.e., pressure, depth, or level). Request Quote View Literature

		CS425 The CS425 submersible pressure transducer is manufactured by Druck for use in surface, ground water, or hostile fluid applications. Changes in water level correspond to pressure changes on a strain gage bonded to a pressure-sensitive diaphragm. When a precision excitation voltage is applied, the electrical resistance varies with changing liquid pressure. Our dataloggers supply the excitation voltage and measure resistance, then convert the measured value to the desired units (i.e., pressure, depth, or level). Request Quote

		CS431 The CS431, manufactured by Instrumentation Northwest for use with Campbell Scientific dataloggers, measures both water level and water temperature. It uses piezoresistive strain gage technology to measure water level and an on-board thermistor to measure water temperature. The CS431 has a 316 stainless steel body and Viton® and Teflon® wire seals that resist corrosion. Its double-sealed, cable harness protects the cable jacket and reduces the possibility of leakage. The end cone is interchangeable with an NPT inlet. Request Quote View Literature

		CS440 The CS440 submersible pressure transducer is manufactured by ACData Solutions, Inc., to provide liquid level measurements in wells, lakes, streams, and tanks. The pressure transducer uses an isolated silicon strain gauge sensor housed in a 316 Stainless Steel package. The rugged, polyurethane cable jacket remains flexible under harsh conditions. The cable incorporates a vent tube to compensate for atmospheric pressure fluctuations. The vent tube terminates inside a desiccated chamber to prevent moisture from entering the system. Request Quote View Literature

		CS445 The CS445 submersible pressure transducer is manufactured by ACData Solutions, Inc., to provide liquid level measurements in wells, lakes, streams, and tanks. The transducer uses an isolated silicon strain gauge sensor housed in a 316 Stainless Steel package. The rugged, polyurethane cable jacket remains flexible under harsh conditions. The cable incorporates a vent tube to compensate for atmospheric pressure fluctuations. The vent tube terminates inside a desiccated chamber to prevent moisture from entering the system. Request Quote View Literature