Data Loggers by Campbell Scientific, Inc.

Products/Services:

	Click on a category to see this company's product/service line for the chosen category.
	Analyzers Gas Anemometers Data Acquisition Systems Data Collection Systems Data Loggers Encoders Shaft Hygrometers Probes Current Humidity pH Temperature Thermocouple Pyranometers Radiometers Resistance Temperature Detectors (RTDs) Sensors Air Velocity Conductivity Current Dissolved Oxygen Distance Electric Field Flow Gas GPS Heat Flux Humidity Moisture pH Position Precipitation Pressure Quantum Turbidity Water Wind Temperature Sensors Air RTD Soil Surface Thermistor Thermocouple Water Thermocouples Type E Transducers Pressure

Contact Details:

		See Phone No

		E-mail Company
		Visit Website

Campbell Scientific, Inc.

Logan, UT

	* NOTE: Click on an image to enlarge it in a new window.
		CR800 The CR800 provides a lower-cost datalogger alternative for measurements of a limited number of sensors, yet can be used with most of our telecommunication devices such as cellular telephones, UHF/VHF RF modems, and satellite transceivers. The CR800 datalogger uses external power supplies and keyboard displays. Request Quote View Literature

		CR850 The CR850 datalogger is similar to the CR800 datalogger, except it has a keyboard display as part of its integrated package. The CR850 provides a lower-cost datalogger alternative for measurements of a limited number of sensors, yet can be used with most of our telecommunication devices such as cellular telephones, RF UHF/VHF RF modems, and satellite transceivers. The CR850 datalogger uses external power supplies. Request Quote

		CR1000 The CR1000 datalogger builds on the foundation of our CR10 and CR10X dataloggers. The CR1000 retains the versatility of the earlier loggers with a detachable wiring panel, separate power supply, and optional keyboard display. It features increased memory and more measurement channels than previous dataloggers in this series, and an RS-232 port for communication. When used as part of a data acquisition system, the CR1000 datalogger provides measurement and control functions. Request Quote View Literature

		CR3000 The CR3000 Micrologger® is a self-contained, rugged datalogger that can measure most sensor types directly, communicate via modems, control external devices, and store both data and programs in either non-volatile Flash memory or battery-backed SRAM. The CR3000 has an integral, 8-line, alphanumeric display and power supply. A battery-backed, real-time clock and 4M of nonvolatile data storage is included. The CR3000 is available with a sealed rechargeable battery base, an alkaline base, or in a low-profile version without batteries. Request Quote View Literature

		CR5000 The CR5000 is a rugged, high performance, integrated datalogger/data acquisition system with a built-in keyboard, graphics display, and PCMCIA card slot. It combines 16-bit resolution with a maximum throughput of 5000 measurements per second. The CR5000 is available with a built-in sealed rechargeable battery base or in a low profile version without batteries. Request Quote View Literature

		CR700X The CR7 is a precision instrument that is primarily used in multi-parameter research and industrial applications. Each CR7 system is individually configured to meet the specific measurement needs of the customer. A control module is the base of the measurement system, then the input/output module, datalogger enclosure, and I/O cards are added. As measurement needs change from study to study, the CR7 can be adapted by modifying the I/O card configuration. Request Quote View Literature

		CR9000X The CR9000X is a modular, multiprocessor system that provides precision measurement capabilities in a rugged battery-operated package. The CR9000X consists of a base system and a chassis with I/O module slots that accepts up to nine user-selected modules. A compact version of the CR9000X is available as the CR9000XC, which accepts up to five user-selected modules. The CR9000X has a powerful instruction set that supports measurement of most sensor types, on-board processing, data reduction, and intelligent control. Request Quote View Literature

		CR200 The CR200 is our lowest-cost datalogger. Its input channel configuration and small size is optimal for measuring one or two sensors. When paired with an ENC200 enclosure and the small 16869 battery, the packaged CR200 has a deployment size of only 6 inches by 7 inches. The CR200 is the "base" model in the CR200 datalogger series. The CR200 does not include a radio. However, three related models, the CR206, CR211, and CR216, carry on-board, spread spectrum radios in the 915 MHz, 922 MHz, and 2.4 GHz frequency ranges respectively. Request Quote View Literature

		CR206 The CR206 Datalogger features an on-board 915 MHz spread spectrum radio with the functionality of the CR200 Datalogger. The CR206's input channel configuration and small size is optimal for measuring one or two sensors. When paired with an ENC200 enclosure and the small 16869 battery, the packaged CR206 has a deployment size of only 6 inches by 7 inches. This small package is optimal for the CR206 to be used as a wireless sensor within a PakBus network. Request Quote View Literature

		CR211 The CR211 Datalogger integrates an on-board 922 MHz spread-spectrum radio with the functionality of the CR200 Datalogger, providing both measurement and telecommunication capability in one small package. The CR211's input channel configuration and small size are optimal for measuring one or two sensors. When paired with an ENC200 enclosure and the small 16869 battery, the packaged CR211 has a deployment size of only 6 inches by 7 inches. If an alternate spread spectrum radio is required, see our CR206 and CR216 dataloggers. Request Quote View Literature

		CR216 The CR216 Datalogger combines an on-board 2.4 GHz spread spectrum radio with the functionality of the CR200 Datalogger. The CR216 provides both measurement and communication capability in a small, rugged package. The CR216's input channel configuration and small size is optimal for measuring one or two sensors. When paired with an ENC200 enclosure and the small 16869 battery, the packaged CR216 has a deployment size of only 6 inches by 7 inches. If an alternate spread spectrum radio is required, see our CR206 and CR211 dataloggers. Request Quote View Literature

		CR295 The CR295 Datalogger is optimized for use with the TX312 GOES Satellite Transmitter. A specific port for TX312 communications and a specialized instruction set has been added to the CR295 to provide communication with our GOES satellite transmitter. The CR295 Datalogger is ideal for remote data collection sites where only a few sensors will be measured and satellite transmission is required. The number of sensors that can be measured by the CR295 is determined by the sensor output. SDI-12 sensors are measured using a control port, power, and ground. Request Quote View Literature