 | Products/Services: |  |
| Click on a category to see this company's product/service line for the chosen category. | ||
 |  |
| Rexnord Corp. | Milwaukee, WI | |
| * NOTE: Click on an image to enlarge it in a new window. | |||
.jpg) | Falk™ Drive One® Universal Drives • Ratios: 1.25:1 to 140:1 • Power: 20 to 1,900 kW (25 to 2,500 hp) • Torque: 5 to 94 kNm (58,000 to 840,000 lb-in) • 9 sizes • Horizontal or vertical output • Solid or hollow output shafts • Base or shaft mounted • Exclusive 6-sided mounting for unmatched versatility • Many pre-engineered accessories to provide complete application solutions • Lowest lifetime cost. | ||
.jpg) | Falk™ Drive One® Conveyor Drives • Ratios: 5.6:1 - 71:1 • Power: 121 to 6,626 kW (157 to 8,700 hp) • Torque: 112 to 245 kNm (991,000 to 2,169,000 lb-in) • 4 sizes • Horizontal output • Solid output shafts • Base or shaft mounted • 60,000 hour L10 life at 1.5 service factor • Robust universal left/right split design • Cool running through integrated oil distribution system and low sump levels. | ||
.jpg) | Falk™ Drive One® High Torque Drives • Ratios: 160:1 - 700:1 (higher ratios available) • Power: to 1000 hp • Torque: 103 to 458 kNm (910,000 to 4,050,000 lb-in) • 6 sizes • Horizontal output • Solid or hollow output shafts • Base or shaft mounted • High torque from a compact package • Cost-effective alternative to hydraulic and conventional drives • Quick delivery from stock components. | ||
.jpg) | Falk™ Drive One® Alignment-Free™ • Ratios: 9:1 - 35:1 • Power: 22 kW to 630 kW (30 to 800 hp) • Torque: 5.6 to 130 kNm (30,000 to 1,150,000 lb-in) • 11 sizes • Horizontal output • Solid and hollow outputs • Right angle shaft mounting • Soft start conveyor drive solution • Universal left/right design, no foundation or shaft alignment required • NEMA and IEC motor compatible. | ||
.jpg) | Falk™ A+ Plus Parallel/Right-Angle Drives • Ratios: 1.80:1 - 437:1 • Power: to 14,168 kW (to 19,000 hp) • Torque: 2.9 to 621 kNm (26,000 to 5,500,000 lb-in) • 17 sizes • Horizontal or vertical output • Solid or hollow output shafts • Base or shaft mounted • Fabricated steel housing • Magnum no-leak seals • An effective solution for nearly every application. | ||
.jpg) | Rexnord® Shaft Mounted Planetgear™ (SMP) Ratios: 11 to 1785:1 Power: to 375 kW (500 hp) Torque: 15-339 kNm (140,000 to 3,000,000 lb-in.) • 5 sizes • Concentric configurations • Taconite duty seals • Optional scoop, flange, or topmounted motors • Custom solutions available to meet exact application requirements. Modifications include torque arm, cface input, and hollow output shaft bore sizes • Alternative to Traditional Shaft Mounts. Available in 5-7/16" and 6- 7/16" hollow bore • Hydro Advantage, an innovative hydraulic removal system, is integral to the low speed shaft and applies a separating force between the end of the driven shaft and reducer. | ||
.jpg) | Falk™ Quadrive® Shaft-Mounted Drives • Ratios: 5, 14, 25:1 • Power: to 224 kW (300 hp) • Torque: to 36 547 Nm (350,000 lb-in) • 11 sizes for flange or shaft mounting • Horizontal or vertical mounting • Bushing bores from 25 to 160 mm (1 inch to 6-1/2 inch) • 5 to 350 rpm output speeds • Torque Assist TA Taper® bushing guarantees removal. | ||
.jpg) | Falk™ Ram® Mixer Drives • Ratios: 5.06:1 to 1,207:1 • Power: to 4 100 kW (5,500 hp) • Torque: to 429,000 Nm (3,800,000 lb-in) • 18 sizes in parallel shaft or right-angle shaft configurations • Solid and hollow shafts • Top, bottom, or side entry mixer mountings • Rugged, rigid housing that includes: - No leak drywells - Extended bearing life - Large diameter shafting | ||
.jpg) | UJ Shaft-Mounted Offset Helical • Ratios: 5:1 to 20,000:1 • Power: 19 kW to 30 kW (1/4 hp to 50 hp) capacity • Torque: to 5 kNm (48,000 lb-in) • 6 sizes • C-face inputs provide convenient, beltless packages • Base, shaft, or flange mounted designs • Shaft-mounted designs utilize Falk™’s unique TA Taper® bushing • CEMA screw conveyor design • Horizontal or vertical mounting. | ||
.jpg) | UW Right-Angle Helical Worm • Ratios: 8:1 through 60,000:1 • Power: 19 kW to 37 kW (1/4 hp to 50 hp) capacity • Torque: to 5 kNm (46,000 lb-in) • 8 sizes • C-face and solid inputs, inch or metric • Base, shaft or flange mounted designs • Straight bored hollow, tapered hollow shaft with TA bushings, or solid output shafts • Horizontal or vertical mounting. | ||
.jpg) | Falk™ Omnibox® Worm Gear Drives • Ratios: 5:1 to 3,600:1 • Power: to 81 kW (100 hp) • Torque: to 10 168 Nm (90,000 lb-in) • 14 sizes for foot, flange, or shaft mounting • 34 mm thru 254 mm (1.33 inch thru 10 inch) centers • Vertical or horizontal inputs and outputs | ||
Request Quote
View Literature | |
 |
