New Round Urethane Vibration Isolators From AAC Are Designed To Function To Spec in Severe Environments

Press Release:
  Jan 18, 2013 — Two new series of round Urethane vibration isolators from Advanced Antivibration Components are designed for use in severe environments where they may come in contact with oils, chemicals, ozone and/or ultraviolet light. These highly damped units, identified as the V10Z60 Series, exhibit extremely low amplification at resonance and quickly return to system equilibrium after any shock or vibration input.

Our "female" series are designed for maximum compression loads of up to 45 lbs. (20.4 kg), and shear loads of up to 10 lbs. (4.5 kg). This series has an internal threaded hole on one side. Our "male" series can handle compression loads of up to 50 lbs. (22.7 kg) and shear loads of up to 13 lbs. (5.9 kg). They feature threaded mounting studs on one or both sides which range in length from .200" (5.1 mm) to .625" (15.9 mm). The isolator for male and female mounts range from .280" (7.1 mm) to 1.000" (25.4 mm) in diameter and from .320" (8.1 mm) to .750" (19.1 mm) in length.

All units are made of Urethane, with a durometer of 24 or 52. Zinc plated steel fasteners are bonded to the main isolator section. Operating temperature ranges to 105°F (40.6°C) for peak performance and 225°F (107.2°C) maximum continuous use.
 
 
 
Categorized Under: Vibration Isolators
 
Company Details:
 Contact:Herb Arum 
 E-mail:aacsupport -at- vibrationmounts -dot- com 
   
 Company:Advanced Antivibration Components - AAC View Company Profile 
 Address:work2101 Jericho Turnpike 
 Location:workNew Hyde Park, NY 11042-5416  United States 
 Phone:workpref516-328-3662 
 Web Site:http://www.vibrationmounts.com