Adhesive Manufacturers

An adhesive is a compound that adheres or bonds two items together. Adhesives may come from either natural or synthetic sources. Some modern adhesives are extremely strong, and are becoming increasingly important in modern construction and industry.

Search » Adhesives
Showing 1-25 of 769 Manufacturers
Logo for Aron Alpha Industrial Krazy Glue Aron Alpha Industrial Krazy Glue (West Jefferson, OH)

Manufacturer

www.aronalpha.net

Toagosei America Inc. brings you ARON ALPHA, a family of industrial cyanoacrylate adhesives (instant glues) for a wide range of manufacturing, automotive, electronics and general assembly applications. Toagosei America has been producing cyanoacrylate adhesives since 1960, commercially marketed under the trade names of ARON ALPHA and KRAZY GLUE.

Product(s) by Aron Alpha Industrial Krazy Glue
Logo for Elastomeric Specialties, Inc. Elastomeric Specialties, Inc. (Montclair, CA)

Manufacturer, Contract Manufacturer

www.elastomeric.com

ESI manufactures specialty compounds, compression molded and diecut elastomer products ... as well as a silicone-based family of electrically and thermally conductive film adhesives.

J.J. Short Associates, Inc. (Macedon, NY)

Manufacturer, Contract Manufacturer

We are an authorized distributor for NuFlex Silicone Sealants focused towards the HVAC, Plumbing, Insulation, Building & Construction, Industrial, Electrical, Mechanical, Marine, OEM, & Transportation markets. Silicone sealants, meet the specifications established by established by the Canadian, US and British Standards including NSF, UL & FM.

All Seals, Inc. (Lake Forest, CA)

Contract Manufacturer

Smoothedge SA (Pty) Ltd. (Johannesurg, South Africa)

Manufacturer, Contract Manufacturer, Distributor

At Smoothedge, we are undisputed leaders in the provision of construction adhesives and attach great importance to research and development in the product category to ensure that our products fully satisfy the requirements of our clients. Nowhere is this seen more than in our development of an environmentally-friendly “green adhesive” that meets the performance standards set by traditional solvent-based adhesives. Earthbond Low-VOC Adhesive, the product is a superior acrylic-based adhesive that has been widely accepted by the market. Our range of adhesives comprise of: Acrylic adhesives (Acrytac and Monogrip), and Solvent-free adhesives (Earthbond and Earthtac). Other products in the range comprise of Contact Adhesives, Latex 60%, Superkrete (Screed), Superbond Bonding Liquid, All Weather Outdoor Carpet Adhesive, two-part Polyurethane and Earthtac PSA. Smoothedge has an adhesive for any requirement: indoor and outdoor.

Henan G&D Chemical Products Co.,Ltd (Puyang, China)

Manufacturer, Contract Manufacturer

Resins Characters: •Light colored and transparent granule  •Make the initial adhesion performance, cohesive strength and peel strength reach the best balance •Super aging resistance performance •Good fluidity which can improve the wetting property of master material. •Narrow molecular weight distribution •Low volatility and no odor •Excellent compatibility with cinnamene copolymers (Such as SIS,SBS,SEBS and SEPS) ,NR,SBR , EVA and Natural sticky resins(Such as Terpene ,Gum resin and its ramification ).

shanghai east bonding materails co.ltd (shanghai, China)

Manufacturer

Copolyamide hot melt adhesive powder could be used by hot melt coating, spraying and casting to produce film, web, net and tape. It has excellent bonding strength, good washing and dry cleaning resistance. Widely used for coating and lamination of technical textiles, paper, transfer printing, interlining ,leather either metal. It specially bond for wood, linen and cotton fabrics etc

Airsan Corp. (Milwaukee, WI)

Manufacturer

All permanent metal air filters must have an adhesive applied after cleaning. Airsan Film-Cor recharging adhesive is nearly odorless, has a high flash point and rapid wetting characteristics. Airsan Film-Cor is U.L. listed on Airsan filters and is available in 16 oz. aerosol cans, 1 gal. and 5 gal. cans, and 55 gal. drums.

HYLOC Limited (Runcorn, United Kingdom)

Manufacturer, Contract Manufacturer

HYLOC Limited is a ISO9000 registered manufacturer of high-specification cyanoacrylate adhesives. HYLOC products are available in bulk only, this ensures that we do not compete in the packaged market with our own customers. HYLOC service and support is unrivalled. To view our extensive range of products and to fird out more visit www.hyloc.com.

MitreFix Kimya Sanayi ve Tic Ltd Şti (Istanbul, Turkey)

Manufacturer

Mitrefix Adhesives & Glues Company-April Industrial Investments Inc. was established in 1999 and is leading adhesive and glue manufacturer company in Turkey. We have been producing all kinds of PVA based adhesive and cyanoacrylate adhesive aerosols such as cyanoacrylate, super glue, PVA based adhesives, silicone, foam, hotmelt, etc. in our plant in

Tex Year Industries Inc. (New Taipei City, Taiwan)

Manufacturer

Tex Year® Pressure Sensitive Hot Melt Adhesive has very good adhesion and wide usage that is suitable for adhesives with pressure sensitive adhesive requirement. Tex Year has two series of pressure sensitive hot melt adhesive 1.Tex Year® TPR Based Pressure Sensitive Hot Melt Adhesive. 2.Tex Year® Polyolefin Based Hot Melt Adhesive.

Cattie Adhesive Solutions (Quakertown, PA)

Manufacturer, Contract Manufacturer, Distributor

Cattie Adhesives is a Manufacturer and Value-Added Supplier of Bulk Hot Melt Adhesives, Water-Based Adhesives and Adhesive Dispensing Equipment. With over 30 years of experience in the adhesives industry, you can be sure that Cattie Adhesive Solutions has the expertise to solve your most difficult adhesive problems. Visit: www.cattieadhesives.com

Vital Technical Sdn. Bhd. (Kuala Lumpur, Malaysia)

Manufacturer

We are a leading manufacturer of adhesive, sealant and waterproofing products in Malaysia. Our targeted markets are Construction, Hardware, Industrial, Automotive Aftermarket and Consumer DIY applications. Our product range includes: 1. Silicone / Acrylic Sealant 2. PVC Solvent Cement 3. Contact Adhesive 4. RTV Gasket Makers 5. Epoxy Adhe

Empire West / Urethane Service (Cerritos, CA)

Manufacturer

From the pump to the applicator, Graco has system solutions for the toughest Adhesive and sealant equipment applications. Graco products move, meter, control and dispense the most challenging adhesive and sealant formulas. These systems perform with the highest degree of reliability possible, on the most demanding manufacturing lines.

Design Converting, Inc. (Grand Rapids, MI)

Manufacturer

Design Converting offers a wide range of materials to fit your project. We will work closely with you to source any material, or offer suggestions for cost saving alternatives. Samples, prototypes, long or short production runs are available with the best lead times in the industry.

Curbell Plastics (Orchard Park, NY)

Distributor

Full line plastics supplier of sheet, rod, tube, films, adhesives, sealants, tooling materials, fabricated parts & other related plastic material products. 16 nationwide locations. Curbell works with you to the find the right material for your application. Call 1888CURBELL & put us to work for you.

Foam Kit Solutions (Massillon, OH)

Distributor

Our Polyurethane adhesives are moisture-cured adhesives designed to create an extremely strong bond between various materials or uneven surfaces. Unlike standard cartridge type adhesives, our polyurethane based adhesives are packaged in pre-pressurized cans and dispensed with a straw applicator or a professional dispensing unit.

Cooper Fabrics (North Andover, MA)

Contract Manufacturer, Distributor, Service Company

Our fabric Lamination process is both unique and versatile. We have the ability to use many and varied adhesive systems, both breathable and non-breathable. Some of the hot melt adhesives we have at our disposal are Polyester, Polyamide, Copolyester, Copolyamide, Polyurethane, and PVC.

Stockwell Elastomerics, Inc. (Philadelphia, PA)

Manufacturer

Gaskets and cushioning pads are often provided with pressure sensitive adhesives. Stockwell Elastomerics, Inc. works with 3M, Adchem and additional pressure sensitive adhesive manufacturers to provide a broad selection of pressure sensitive acrylic, rubber-based and silicone-based pressure sensitive adhesives for gaskets and pads.

Adhesives Specialists (Allentown, PA)

Manufacturer

Adhesives Specialists is a custom Hot Melt manufacturer. We formulate pruducts to match our customers needs, equiptment, and environment. With our highly educated and motivated staff, we can answer any questions you may have and provide you with the perfect match.

Norpak Adhesives (Shirley, MA)

Manufacturer

Cyanoacrylates. Manufacturers of the World's Oldest Brand of Super Glue since 1955. Custom Formulating in any viscosity, Private Label Packaging in tubes, syringes or bottles. Epoxy formulating packaged in bottles or side-by-side cartidges. Mercaptan Curing agents (compare our prices to Cognis)

Pinghu Zhanpeng Hot Melt Adhesive Web& Film Co., Ltd (Pinghu, China)

Manufacturer

Detailed Product Description Appearance: Grid backing release paper Weight range: 30-35g Description Appearance: Grid backing release paper Weight range: 30-35g Width: 0.6cm-1.2m Melting range: 115-125°C Pressing temperature: 130-140°C Pressing time: 15-20s Application: Garments, home textiles, underwear, etc. Technic data:

Anhui Goldmen Industry And Trading Co., Ltd (Hefei, China)

Manufacturer, Distributor

We are a one of specialized manufacturer of hot melt glue sticks and glue guns from China.So we can supply products with lower price and good quality to our clients.transparent,translucent,opaque,color and glitter sticks are our main products.

SERPAK, INC. (Woostock, GA)

Manufacturer

Markerbond hot melt adhesive is designed for installing all types of raised pavement markers (non snowplowable) on asphalt and portland cement road surfaces. Can be used for Point of Purchase displays and many different types of plastics.

CA PLUS, Inc. (Columbia, SC)

Manufacturer

CA PLUS, Inc. has over 32 years of experience in Cyanoacrylate Adhesives and Anaerobic Adhesives/Sealants. We offer over 100 different formulations, including multiple viscosities in 12 different families of Cyanoacrylates. (Most are made in the USA).

1 2 3 4 5 6 7 831

Results 1 to 25 of 769

^ Return to Top