Gate Valve Manufacturers In Pennsylvania (PA) and Nearby States
The following is a comprehensive list of gate valve manufacturers that serve Pennsylvania. A gate valve is a valve with a two seated gate like disk moving perpendicularly to the fluid flow. This valve is most often used fully open or fully closed providing excellent sealing and is often used in the chemical industry.
| Red Valve Company Inc. (Carnegie, PA)
Manufacturer Red Valve's Knife Gate Valves are the perfect compliment to our broad range of slurry handling products. All Red Valve knife gate valves are designed and engineered to a higher standard, to provide the best performance possible. |
| Watson McDaniel Company (Pottstown, PA)
Manufacturer |
| Thermoplastic Valves Inc (Emmaus, PA)
Manufacturer |
| Kammer Valves Inc (Pittsburgh, PA)
Manufacturer |
| Blankin Equipment Corp (Philadelphia, PA) |
| Bonney Forge Corp (Mount Union, PA) |
| Cpv Mfg Inc (Philadelphia, PA) |
| Environmental Services Group (Norristown, PA) |
| Fetterolf Corp (Skippack, PA) |
| Fire Hydrant Svc (Norristown, PA) |
| Moody Corp (Zelienople, PA) |
| Ogontz Corp (Willow Grove, PA) |
| Olson Technologies Inc (Allentown, PA) |
| Pbm Inc (Irwin, PA) |
| Pneumatic Divison-N America (Canton, PA) |
| Schiller-Pfeiffer (Southampton, PA) |
| Waterware (Philadelphia, PA) |
| Crispin Valve (Berwick, PA)
Manufacturer |
| ITT Industries, Engineered Valves (Lancaster, PA)
Manufacturer |
| China Yaao Forged Valve Co., Ltd (New York, NY)
Manufacturer, Contract Manufacturer Major structures of forged steel gate valve: 1. BODY. The body is forged steel and designed to the basic dimensional requirements of the applicable specifications such as API 602 and ASME B16.34. The body is available in both the full or standard port design. 2. BONNET. The bonnet is forged steel, has an integral backseat and incorporates the stuffing box, which has dimensions per the applicable specifications such as API 602. 3. BODY-BONNET JOINT. Two different bonnet joint designs are available. These are either the bolted bonnet or the threaded and seal welded type. 4. GASKET. The bolted bonnet joint design valve uses a contained, controlled compression, spiral wound type gasket. 5. BONNET BOLTING. The bonnet bolting is manufactured of alloy steel in accordance with the requirements of the applicable specifications such as API 602 and ASME B16.34. 6. SEAT RINGS. The seat rings are steel and makeup part of the valve trim. They are pressed into the valve body and wedged into place, forming a seal with the body. The seating surfaces are ground and lapped. 7. WEDGE. The wedge, which is solid design, is forged or investment cast steel and is part of the valve trim. The seating surfaces are ground and lapped 8. STEM. The stem is forged steel and part of the valve trim. It contains an integral back seat shoulder, which mates with the integral backseat of the bonnet. The stem is designed to the basic dimensional requirements of t |
| China Topper Forged Valve Manufacturer Co., Ltd. (New York, NY)
Contract Manufacturer ASME B16.34 Forged Gate Valve,ISO 15761 Flanged Forged Gate Valve, ISO 15761 Flanged Forged Gate Valve, API 602 Forged Gate Valve, API 602 Forged Gate Valve, ASME B16.34 Forged Gate Valve, ASME B16.34 Forged Gate Valve, ISO 15761 Flanged Forged Gate Valve, ISO 15761 Flanged Forged Gate Valve, API 602 Forged Cryogenic Gate Valve, API 602 Forged Cryogenic Gate Valves |
| Bofa Valve Manufacturer Company (New York, NY)
Manufacturer |
| China MED Valve Manufacturer Co., Ltd. (New York, NY)
Manufacturer |
| DELTA PACIFIC VALVE MFG (HAUPPAUGE, NY)
Manufacturer |
| Powell Valves (Cincinnati, OH)
Manufacturer |
| Click on a state to see companies serving the area and surrounding areas: | X |
.png) | |
