 | Products / Services: |  |
| Click on a category to see this company's product/service line for the chosen category. | ||
 |  |
| Advanced Antivibration Components - AAC | New Hyde Park, NY | |
| |||||||||
| * Click on an image to enlarge it in a new window * | |||||||||
.jpg) | VIBRATION ISOLATORS Advanced Antivibration Components offers a wide selection of Vibration Isolators. To view our complete selection, please visit our website. Thank you. Additional Info: http://www.vibrationmounts.com/Products5.htm  | ||||||||
.jpg) | SPRING MOUNTS Elliptic Leaf Type LEAVES: 304 Stainless Steel* WASHERS: Nylon and Stainless Steel DAMPING COMPOUND: Polymer TEMPERATURE RANGE: +50°F to +86°F (+10°C to +30°C) • NATO APPROVED NAVAL "X" MOUNTS Additional Info: http://www.vibrationmounts.com/RFQ/VM05003.htm | ||||||||
.jpg) | SPRING MOUNTS Damped Type – To 200 lbs. BASE PLATE: Mild Steel SPRING: High-Tensile Steel - Phosphated & Dyed Black ISOLATOR: Knitted Stainless Steel Mesh END CAP: Cast Light Alloy TEMPERATURE RANGE: -94°F to +347°F (-70°C to +175°C) APPLICATIONS:
CHARACTERISTICS: Lateral to vertical stiffness ratio approximately 1:1. Elastic Limit corresponds to a maximum load in compression of .042 oz. (1.2 g) and radially .007 oz. (0.2 g). Damping factor c/co .10 to .15 MOUNTING: Must be loaded vertically through its axis. Additional Info: http://www.vibrationmounts.com/RFQ/VM05009.htm | ||||||||
.jpg) | SPRING MOUNTS Silicone Gel Type STUDS: Brass BODY: Silicone Gel SPRING: Piano Wire Type B, Nickel Plated TEMPERATURE RANGE: -40°C to +200°C (-40°F to +392°F)
Additional Info: http://www.vibrationmounts.com/RFQ/VM05014.htm | ||||||||
.jpg) | STEEL SPRING AND PAD MOUNTS To 4.4 lbs MOUNTING BASE: Aluminum Alloy, Anodized RETAINING CAPS: Aluminum Alloy, Anodized SPRING & CENTER TUBE: Stainless Steel ISOLATOR: Knitted Stainless Steel Pads FOR LOADS OF: .24 to 4.4 Pounds (0.11 to 2 kgf) TEMPERATURE RANGE: -94°F to +347°F (-70°C to +175°C) APPLICATIONS:
DYNAMIC CHARACTERISTICS: Natural frequency = 15 to 25 Hz vertical = 12 to 20 Hz radial Allowable max. movement on mount = ±.012 (0.3) Transmissibility between 3:1 and 4:1 LOADING LIMITATIONS: Mechanical resistance is equal to 10 G of continuous acceleration. Additional Info: http://www.vibrationmounts.com/RFQ/VM110405.htm | ||||||||
.jpg) | STEEL SPRING AND MESH MOUNTS To 10 lbs. HOUSING: Aluminum Alloy, Anodized EYELETS: Brass, Tin Plated ISOLATOR: Stainless Steel Spring and Mesh FOR LOADS OF: .5 to 10 Pounds (0.25 to 4.6 kgf) TEMPERATURE RANGE: -94°F to +347°F (-70°C to +175°C) APPLICATIONS:
DYNAMIC CHARACERISTICS: Ratio between transverse and axial stiffness (vertical) approximately 1:2.5 Natural frequency = 7 to 11 Hz vertical and 4.5 to 7 Hz transverse depending on load, for a displacement input ± .014 (0.35). Maximum displacement input ± .016 (0.4). Transmissibility ≤4:1. Conforms to MIL-E-5400 LOADING LIMITATIONS: Prior to abutting snubber, load corresponding to a continuous acceleration of at least 2 G. Loads corresponding to at least 10 G may be accepted without subsequently affecting the mount performance. Maximum displacement of the suspended unit under limiting loads ± .197 (5). Additional Info: http://www.vibrationmounts.com/RFQ/VM05015.htm | ||||||||
.jpg) | STEEL MESH MOUNTS To 1598 lbs. HOUSING: Machined Casting Center and Cup Washer are Zinc Plated and Gold Passivated Mild Steel ISOLATOR: Stainless Steel Mesh FOR LOADS OF: 77 to 1598 Pounds (35 to 725 kgf) TEMPERATURE RANGE: -94°F to +347°F (-70°C to +175°C) APPLICATIONS: Primarily developed for heavy-duty applications where severe shock forces are encountered, these mounts are especially recommended for vehicle and marine installations where there are high starting torques or reversals of loads. They are capable of withstanding compression loads as high as ten times the static loads and are used for isolating marine fans, mobile engines, generators, instrument consoles and general machine tools such as lathes, milling machines, slotters, broachers, etc.
CHARACERISTICS: Although normally intended to be used in compression, they will accept accidental tensile loads. The mounts should be fixed to the floor for loads in excess of 220 lb. (99.8 kgf) or when working conditions require it. They will accept compressive loads at least five times the static load. Additional Info: http://www.vibrationmounts.com/RFQ/VM05018.htm | ||||||||
.jpg) | SPRING MOUNTS Pedestal Type MOUNTING PLATES: Steel, Zinc Plated SPRINGS: Spring Steel Wire TEMPERATURE RANGE: -76°F to +302°F (-60°C to +150°C) • ALL METAL Additional Info: http://www.vibrationmounts.com/RFQ/VM05021.htm | ||||||||
.jpg) | CABLE ISOLATORS 3/16" Cable Dia CABLE: Stainless Steel (MIL-W-83420) RETAINING BARS: Aluminum Alloy 6061-T6; Iridited (MIL-C-5541) RETAINING CLIPS: Stainless Steel
Additional Info: http://www.vibrationmounts.com/RFQ/VM05027.htm | ||||||||
.jpg) | CIRCULAR CABLE ISOLATORS 3/32" & 1/8" Cable Dia. CABLE: Stainless Steel MOUNTING PLATES: Aluminum TEMPERATURE RANGE: -65°F to +200°F (-54°C to +93°C) APPLICATIONS:
FEATURES:
Additional Info: http://www.vibrationmounts.com/RFQ/VM110604.htm | ||||||||
| |
