 | Products / Services: |  |
| Click on a category to see this company's product/service line for the chosen category. | ||
 |  |
| Asahi / America | Andover, MA | |
| |||||||||
| * Click on an image to enlarge it in a new window * | |||||||||
.jpg) | Series 79 Pneumatic Actuator Asahi/America's Series 79 pneumatic actuators for quarter turn ball and butterfly valves provide accurate and dependable control, especially in corrosive applications. • For more additional information on air acutators. Additional Info: http://www.asahi-america.com/pneumatic-series-79.htm   | ||||||||
.jpg) | Series 79 with Solenoid The solenoid valve used for our pneumatic actuators is a 4-way, on/off, electrically controlled valve. An electrical signal to the solenoid's coil switches the compressed air supply to the actuator cavities, as follows: The solenoid valve is used with the actuator, and simultaneously pressurizes Port A while exhausting the end cap cavities through Port B, or vice versa. The solenoids are furnished with mufflers and speed controls. The muffler reduces the sound of the exhausting air, and the speed control determines the cycle time of the actuator. • For more additional information on pneumatic acutators. Additional Info: http://www.asahi-america.com/pneumatic-series-79-with-solenoid.htm | ||||||||
.jpg) | Series 92 Electric Actuator An electric actuator is basically a geared motor. The motor can be of various voltages and is the primary torque-generating component. To prevent heat damage from overwork or excessive current draw, electric actuator motors are usually equipped with a thermal overload sensor embedded in the motor windings. This sensor is wired in series with the power source and opens the circuit should the motor be overheated, then closes the circuit when the motor reaches a safe operating temperature. • For more additional information on electric acutators. Additional Info: http://www.asahi-america.com/electric-series-92.htm | ||||||||
| |
