Product News and Press Releases
April 29, 2024
Dwyer Instruments, Inc., Michigan City, IN
28 Mar 2008 — Dwyer Instruments, Inc., is proud to announce the release of its NEW Series IT Industrial Thermometer. The Series IT is designed to withstand the wear and tear of everyday use, making it the ideal choice to take accurate temperature measurements in the toughest environments, and has many options that include either 3-1/2" or 6" stems, various temperature ranges, and can be ordered with dual units, °F, or °C.
Listed Under: Industrial Thermometers
Dwyer Instruments, Inc., Michigan City, IN
25 Mar 2008 — Dwyer Instruments, Inc., is announcing the release of its Series FDT Flush Diaphragm Transmitter for highly cyclical conditions. The flush sensor feature prevents any potential inaccuracies due to build-up or blockage which is a typical problem found in most non-flush transmitter sensors. Series FDT transmitters perform well in high cyclical environments with the presence of water-hammering or spiking.
Listed Under: Transmitters
Solid Carbide Gripper Pads & Inserts Offer Long Wear Workholding
Fixtureworks, Fraser, MI
24 Mar 2008 — Fixtureworks has expanded its lineup of workholding and fixturing components with the manufacture of a wide range of solid carbide, serrated and smooth gripper pads and inserts, easily replaceable within workholding and positioning devices. The solid carbide construction, made from high impact grade carbide, provides toughness and long service life, helping to protect expensive fixture components from damage, wear and tear-helping to maximize uptime-while affording secure holding strength and positive contact to a variety of workpiece shapes, sizes, materials, and dimensional variations.
Listed Under: Grippers
Dwyer Instruments, Inc., Michigan City, IN
18 Mar 2008 — The NEW Series FPV Plastic Flap Check Valves from Dwyer Instruments are ideal where backflow could potentially cause damage to pumps, filters, or process equipment. These check valves have been designed to provide excellent flow characteristics, and because of their straight-through flow design they have a lower pressure drop than other check valve designs. In addition, due to their all plastic construction, these valves will never jam or stick as a result of rust or corrosion.
Listed Under: Flap Check Valves
Dual-Function Infrared Thermometer
Dwyer Instruments, Inc., Michigan City, IN
13 Mar 2008 — Dwyer Instruments, Inc., is announcing the release of its NEW IR4 Infrared Thermometer. The IR4 is a dual-function thermometer with laser that offers a wide infrared temperature measurement range and supports K-type thermocouple probes. The thermometer has a temperature range of -76 to 1400°F (-60 to 760°C).
Listed Under: Infrared Thermometers
"Fast Pack" Valve/Actuation Packs
Asahi / America, Andover, MA
6 Mar 2008 — Asahi/America is announcing an exciting addition to our product offering, the Asahi/America Fast Pack. Designed with speed and convenience in mind, Fast Packs are fully assembled valve and actuator combinations that are shipped within 24 hours from the time of order. Ideally suited for industrial applications featuring harsh media environments, packages are available in 1/2" to 4" in ball valves and 1-1/2" to 8" in butterfly valves.
Listed Under: Valve Actuators
Plastic Ball Check Valves w/ True Union
Dwyer Instruments, Inc., Michigan City, IN
4 Mar 2008 — The NEW Series BCV Plastic Ball Check Valves from Dwyer Instruments are economical, thermoplastic ball check valves ideal for chemical and wastewater applications. All sizes of valves feature a true union design, and because of their all plastic construction, these valves will never jam or stick as a result of rust or corrosion. Units come in PVC or CPVC plastic bodies with EPDM or FPM o-rings for a wide range of chemical compatibility and are available in 1/2" to 4" sizes.
Listed Under: Check Valves
Timer Controller with Universal Power Supply
Dwyer Instruments, Inc., Michigan City, IN
28 Feb 2008 — Dwyer Instruments, Inc., has just released the NEW SERIES DCT600 DUST COLLECTOR TIMER CONTROLLER. The Series DCT600 is the ideal solution for dust collection and pneumatic conveying control systems. The DCT600 is available in 4, 6, 10, 22 or 32 channels with field-selectable last channel output.
Listed Under: Controllers
Capacitive Level Transmitter for Powder, Bulk or Liquids
Dwyer Instruments, Inc., Michigan City, IN
26 Feb 2008 — The Mercoid Division of Dwyer Instruments, Inc., has released a new and innovative capacitive level transmitter, the CRF2. State of the art sensing technology in the CRF2, using impulse RF admittance measurement, provides excellent level measurement and stability. The CRF2 senses capacitance changes resulting from the height of the material in the tank between the probe and the tank wall. This capacitive technology has no moving parts - no jams, no wear, nothing to break and no maintenance.
Listed Under: Level Transmitters
Dwyer Instruments, Inc., Michigan City, IN
19 Feb 2008 — The Proximity Division of Dwyer Instruments, Inc., is announcing the release of its New Series LTS Tilt Switch Probe. Probes are able to sense either the presence or absence of material when other sensors won't work due to bin vibration, or actual walls aren't available for mounting other types of measuring units. The probes are designed for use where the bulk material to be sensed is exposed or open. Typical applications include high or low level detection in large hoppers, silos, crushers or trippers, high level control under stackers, and detection of plugged conditions at conveyor transfer points.
Listed Under: Probes
Submersible, Intrinsically Safe Level Transmitter
Dwyer Instruments, Inc., Michigan City, IN
15 Feb 2008 — The Mercoid Division of Dwyer Instruments, Inc., is proud to announce a new and robust submersible level transmitter, the PBLTX. The PBLTX is UL approved intrinsically safe for wastewater applications that demand this rating per local codes and regulations, and is manufactured for years of trouble free service in the harshest applications and is ideal for wastewater, sludge, and slurries. The PBLTX is designed to measure the height of liquid above its position in the tank, sump, or pit.
Listed Under: Level Transmitters
Low Cost Direct-Contact Speed Switch
Dwyer Instruments, Inc., Michigan City, IN
12 Feb 2008 — The Proximity Division of Dwyer Instruments, Inc., is announcing the release of its New Series DSS Direct-Contact Speed Switch. The speed switch is a compact unit designed to include all mechanical and electronic components in one housing. It produces an output signal at a predetermined speed which may be either under-speed, over-speed or zero-speed. Rugged, heavy duty construction combined with solid state electronics and photo-electric technology make the DSS series one of the best rotation monitors available.
Listed Under: Switches
Digital Recirculating Valve (DRV)
Armstrong International, Inc., Three Rivers, MI
7 Feb 2008 — Armstrong International, Inc., a world leader in intelligent system solutions for steam, air and hot water utility applications, introduces the worlds first Digital Recirculating Valve (DRV). DRV 80 also known as "The Big Brain" is engineered exclusively for re-circulating hot water systems. It thinks for itself and offers digital safety and hygiene including programmable temperature alerts and a disinfection program to promote compliance with OSHA, CDC & NYDOH Legionella guidelines.
Dwyer Instruments, Inc., Michigan City, IN
4 Feb 2008 — Dwyer Instruments, Inc., is announcing the release of its NEW IR2 Infrared Thermometer. The Model IR2 handheld infrared thermometer allows users to take quick accurate measurements from a safe distance. The IR2 Infrared Thermometer has a temperature range of -58 to 750°F (-50 to 400°C). The IR2 Infrared Thermometer features 9:1 distance to spot size, selectable temperature units F or C, large bright amber back-lit LCD display and auto power-off after 1 minute.
Listed Under: Infrared Thermometers
ExpressPack™: Multi-tube Steam Dispersion Panel
Armstrong International, Inc., Three Rivers, MI
22 Jan 2008 — Armstrong International, Inc., a world leader in intelligent system solutions for steam, air and hot water utility applications, introduces ExpressPack™, a multi-tube steam dispersion panel that accepts atmospheric source steam and discharges it into a duct or air handling unit. ExpressPack is designed with a series of unique dispersion tubes spaced to provide a shorter non-wetting distance than conventional individual tubes.
Listed Under: Steam Traps
Miniature Infrared Non-Contact Thermometer
Dwyer Instruments, Inc., Michigan City, IN
18 Jan 2008 — Dwyer Instruments, Inc., is announcing the release of its NEW Series MIT Miniature Infrared Non-Contact Thermometer. The MIT is a pocket-sized thermometer with built-in laser that provides easy aiming for accurate reading. The thermometer features a 6:1 optics (distance to spot size), selectable temperature units F/C and an LCD display.
Listed Under: Infrared Thermometers
Economic 1.5" & 2" Industrial Pressure Gage
Dwyer Instruments, Inc., Michigan City, IN
14 Jan 2008 — Dwyer Instruments, Inc., is announcing the release of its New SGA Industrial Pressure Gages. The gages are an ideal and economical solution for applications where corrosion and vibration are of concern. The stainless steel case and ring offer excellent protection from harsh processes and allow the gage to remain suitable for all media compatible copper alloys. A wide offering of ranges from 15 to 1500 PSI allow the SGA gages to be used in a multitude of applications.
Listed Under: Pressure Gauges
Sensor for Particulate Monitoring Systems
Dwyer Instruments, Inc., Michigan City, IN
9 Jan 2008 — Dwyer Instruments, Inc., is proud to announce the release of its New PMS Particulate Sensor. This sensor employs a field-proven combination of passive-induction and protected-probe technologies. As particles flow near and around the probe, minute currents are dynamically induced into the probe by flowing particulate. A DSP processes the signal into an absolute output that is reasonably linear to mass. Protective-layers over the probe work in combination with induction-sensing to ensure reliable operation with all types of particulate including moist powders and highly conductive dusts.
Listed Under: Sensors
Control Unit for Particulate Monitoring Systems
Dwyer Instruments, Inc., Michigan City, IN
9 Jan 2008 — The NEW Series DPM Particulate Monitor from Dwyer Instruments Inc., combines with the PMS Particulate Sensor to provide a basic baghouse and cartridge filter leak detector designed for general maintenance planning and process protection. Leakage is gauged in real-time, on-the-spot, without prior baseline data and without signal tuning. The DPM Control Unit is housed in a rugged cast aluminum enclosure, while an LCD displays particulate levels in bar-graph and digital forms.
Listed Under: Sensors
Polycarbonate & Polysulfone Flow Meters
Dwyer Instruments, Inc., Michigan City, IN
3 Jan 2008 — Dwyer Instruments, Inc., is announcing the release of its Series HFPC and HFPS Injection Molded Flow Meters. The flowmeters are made of injection molded, polycarbonate and polysulfone bodies, respectively, and have dual scales measuring in both GPM and LPM with +/- 5% full scale accuracy. Rugged construction allows these meters to handle maximum pressures of 325 PSIG (22.4 bar) and 200°F (121°C).
Listed Under: Flow Meters
Dwyer Instruments, Inc., Michigan City, IN
19 Dec 2007 — Dwyer Instruments, Inc., is announcing the release of its New LPG4 Low Pressure Gage. The Series LPG4 gages offer top of the line performance for pressure and vacuum applications. The Series LPG4 gages come with a 2.5" (63mm) dial size and possess a +/-1.5% full scale accuracy. These units can withstand ambient temperatures up to 140°F (60°C) and process temperatures up to 160°F (70°C).
Listed Under: Pressure Gauges
Tuning Fork Level Switch For Powder, Bulk or Liquids
Dwyer Instruments, Inc., Michigan City, IN
14 Dec 2007 — The Proximity Division of Dwyer Instruments is offering a new and innovative tuning fork level switch, the Series TFLS. The TFLS incorporates a piezoelectric crystal that vibrates the fork at its natural frequency. The switch changes state when the vibration is dampened by sensed material. The level switch is ideal for level control of powders and fine-grained solids, especially those with a low bulk density.
Listed Under: Liquid Level Switches
Randolph Austin Company, Manchaca, TX
12 Dec 2007 — Available exclusively through Randolph Austin for the US market, the TP 1000 V peristaltic pump is German engineered by Tholen Pumpen, and has had great success in the European marketplace for dosing pumps. The TP 1000 V is designed as an exact dose, extremely precise, metering or bottling peristaltic pump and is an excellent choice for laboratories or filling operations that require repeatable and reliable filling or metering applications.
Listed Under: Peristaltic Pumps
Digital Gage with Switch & Transmitter Outputs
Dwyer Instruments, Inc., Michigan City, IN
5 Dec 2007 — Dwyer Instruments, Inc., is announcing the release of its New DPG-200 Series Digital Pressure Gage with Switch and Transmitter. The Series DPG-200 builds off the popular Dwyer DPG-100 series digital gage with 0.25% full scale accuracy sensor except adds the additional features of (2) SPDT switch outputs and a 4-20 mA process signal. The 12-24 VAC/VDC powered units come with a 4-digit LCD display, reducing inaccurate readings by eliminating parallax error commonly produced with analog gages.
Listed Under: Pressure Gauges
Dwyer Instruments, Inc., Michigan City, IN
27 Nov 2007 — Dwyer Instruments, Inc., is announcing the release of its NEW SERIES TSS2 DUAL STAGE DIGITAL TEMPERATURE SWITCH. This digital temp switch offers a 3 digit red LED display for easy viewing at a distance. The unit accepts up to two PTC thermistor temperature sensors to accurately control temperatures up to 302°F, and easily customized via 34 user programmable parameters.
Listed Under: Temperature Switches
DIN-Rail Temperature/Process Controller
Dwyer Instruments, Inc., Michigan City, IN
20 Nov 2007 — LOVE CONTROLS, a Division of Dwyer Instruments, Inc., is introducing the Series SCD DIN Rail Temperature/Process Controller. The Series SCD offers multiple PID loops in a compact size. Each SCD Master controller can be combined with up to seven SCD slave controllers without any wires. Each controller has one universal input, one relay output and one user selected output.
Listed Under: Process Controllers
Thermocouple FM Approved Limit Control
Dwyer Instruments, Inc., Michigan City, IN
13 Nov 2007 — LOVE CONTROLS, a Division of Dwyer Instruments, Inc., introduces the NEW Series TSF Thermocouple FM Approved Limit Control. The limit control provides audible alarm status along with a robust 15 amp relay alarm output, and can be used as a high or low limit alarm. The ease of programming and low price makes the TSF series the best value limit control on the market.
Listed Under: Digital Panel Meters
3 1/2 Digit LCD Digital Panel Meter
Dwyer Instruments, Inc., Michigan City, IN
8 Nov 2007 — Dwyer Instruments, Inc., is announcing the release of its NEW SERIES DPMP-5 LCD DIGITAL PANEL METER. The series DPMP-5 is designed with a large 3-1/2 digital LCD display with a choice of red, amber, or green segments. The meter features adjustable zero and span selectable decimal point position, and selectable 12 VDC or 24 VDC power supply.
Listed Under: Digital Panel Meters
Series TID Temperature/Process Indicator
Dwyer Instruments, Inc., Michigan City, IN
2 Nov 2007 — LOVE CONTROLS, a Division of Dwyer Instruments, Inc., has introduced the NEW Series TID Temperature/Process Indicator. Temperature ranges are available from -58 to 302°F (-50 to 150°C) using one of our PTC or NTC thermistors. Process values can be displayed from -999 to 999 counts using a 4 to 20 mA signal from one of our various transmitters. Available in red, green or blue display models.
Listed Under: Temperature Indicators
New Series DPML-5 LCD Digital Panel Meter
Dwyer Instruments, Inc., Michigan City, IN
30 Oct 2007 — Dwyer Instruments, Inc., is announcing the release of the NEW SERIES DPML-5 LCD DIGITAL PANEL METER. The Series DPML-5 is designed with a large 4-1/2 digit LCD display with a choice of red, amber, or green segments. The engineering units are selectable for °F/°C, psi, or % - ideal for a variety of applications.
Listed Under: Digital Panel Meters
One-Touch™ Differential Pressure Transmitter
Dwyer Instruments, Inc., Michigan City, IN
24 Oct 2007 — Reduce installation and calibration time with the Dwyer Instruments, Inc., SERIES 616OT ONE-TOUCH™ DIFFERENTIAL PRESSURE TRANSMITTER. The Series 616OT is a cost-effective, compact transmitter that reduces up-front costs as well as expenses over the life of the product. The 616OT One-Touch™ Transmitter not only alleviates cumbersome turn pots typically found in most transmitters but also eliminates entirely the need to span the instrument during calibration. . .all with the push of one button!
Listed Under: Pressure Transmitters
In-Line Infrared Temperature Sensor
Dwyer Instruments, Inc., Michigan City, IN
19 Oct 2007 — Dwyer Instruments, Inc., has announced the release of its New ILA Series Infrared Temperature Sensor. The ILA is a non-contact sensor that measures temperatures from 32 to 932°F (0 to 500°C) and provides linear 4 to 20 mA, 0 to 5 VDC or Thermocouple Output.
Listed Under: Infrared Temperature Sensors
New Series DPMW LCD Digital Panel Meter
Dwyer Instruments, Inc., Michigan City, IN
16 Oct 2007 — Dwyer Instruments, Inc., is announcing the release of its NEW SERIES DPMW LCD DIGITAL PANEL METER. The meter accepts a 4-20 mA input signal from pressure, temperature, flow, level and many other transmitters. The meter is designed with a 3-1/2 digit, high contrast LCD display, and has user selectable engineering units in °F, °C, psi, or %.
Listed Under: Digital Panel Meters
Locking Handle for Asahi Type 21 Ball Valve
Asahi / America, Andover, MA
9 Oct 2007 — Asahi/America, Inc. introduces the new locking handle for their Type 21 Ball Valves. The pad-lockable handle directly replaces the standard valve handle and acts as a deterrent to prevent unauthorized cycling of the valve. The new design allows the handle to serve as a position indicator, easily demonstrating the current state of the valve, and also doubles as a carrier removal tool, used for valve maintenance and adjustments.
Listed Under: Ball Valves
Variable Area Flow Meter For Water
Dwyer Instruments, Inc., Michigan City, IN
5 Oct 2007 — Dwyer Instruments, Inc., is proud to announce the release of its new series LFM Variable Area Flow Meters for Water. Series LFM In-Line or Panel Mount Flowmeters are molded from various plastic materials that are ideal for water usage. Sizes range from compact 2" scale units with ranges down to 5 GPM of water up to larger 5.5" scale models with ranges up to 70 GPM of water.
Listed Under: Variable Area Flow Meters
- HOME
- COMPANY NEWS
- INDUSTRY & GOVERNMENT NEWS
- PRODUCT NEWS
Submit Press Release
