 | Products / Services: |  |
| Click on a category to see this company's sample pictures for the chosen category. | ||
 |  |
| Electro Standards Laboratories | Cranston, RI | |
| |||||||||
| * Click on an image to enlarge it in a new window * | |||||||||
.jpg) | The Model 4149 media converter is a very high speed ruggedized ST Fiber to RS485/422/232 interface converter. Typical operating speeds are as follows: Up to 1.5 Mbps for RS232 to fiber conversion, Up to 5 Mbps for RS485/422 to fiber conversion. The Model 4149 Fibre to RS Converter is designed to operate from -40°C to +85°C. Model 4149 is a member of Electro Standards Laboratories' (ESL) rugged community of fiber-to-copper media converters. The Model 4149 features protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. The unit's power input is protected from transients and features 3kVDC isolation to prevent system ground loops. Model 4149 can be powered from a wide input range of 10VDC-36VDC, with modules also available for other voltage ranges such as 4.5VDC-9VDC and 19VDC-72VDC. Other features include user-selectable fiber polarity, dual DB9 power connectors (board only) for convenience in bused power applications, TX, RX and Power indicator LEDs. This Fiber to RS485/422/232 converter is also available as a board only, Model 4159, Cat. No. 304159, with front mounting threaded brackets for rack mounting in embedded applications. For applications that require an enclosure, it is available in a desk top package, Model 4149, Cat. No. 304149, with optional DIN rail mounting hardware. These Fiber Converters are ruggedized for commercial and military applications. Three functions in one unit: ST Fiber to RS485 Converter ST Fiber to RS422 Converter ST Fiber to RS232 Converter Specifications: Fiber Interface: Connectors: Fiber Optic ST TX Power: -12.5 dBm RX Sensitivity: -27.5 dBm Optical Budget: 15 dB Max. Link Distance with 62.5/125µm fiber: 5.35 km at up to 5 Mbps, 25°C 3.75 km at up to 5 Mbps, -40°C to +85°C Wavelength: 820 nm/850 nm, multimode Fiber Size: 50/125 µm, 62.5/125 µm, 100/140 µm. Fiber Polarity: Logical 1 = Light ON/OFF: User Selectable Copper Interface: Connectors: DB9, Female. Type: RS485, RS422, RS232 Terminations: RS485/422 120 Ohm insertable. Bit Rate (nom.): RS232: 0 to 1.5 Mbps. RS485/422: 0 to 5 Mbps. Indicators: LEDs:TXD, RXD, PWR. Power: Input Power: 10VDC-36VDC std, 4.5VDC-9VDC, 19VDC-72VDC, Others at 1.5W. Isolation: 3 kVDC. Connectors: Dual DB9F for Power Daisy Chaining (Board Only, Model 4159, Cat. No. 304159), DC Power Jack (Desktop Unit, Model 4149, Cat. No. 304149) Operating Environment: -40°C to +85°C. Model 4159 Mechanical (Board Only, Model 4159, Cat. No. 304159) Size: 3.9" x 3.9" x 0.63" Weight: 3.5 oz. (99g) Mounting: Mounting Holes, Right Angle Brackets Model 4149 Mechanical (Desktop Unit, Model 4149, Cat. No. 304149) Size: 5" x 4.25" x 1.4" Weight: 10.1 oz. (286g) Mounting: 4 Threaded Holes Std. DIN rail. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=261   | ||||||||
.jpg) | Hi Density Fiber MTP Commercial Conversion Kit for M28876 Military Fiber System. Features: Form, fit, function compatile with M28876 Military Fiber Systems. Footprint fits existing panel cutouts for M28876. Use the MTP System without major documentatin changes. 10X cost savings over M28876 systems. Reduced weight. Designed for prototype test systems that do not experience extreme environments. Fast delivery with commercial components. Higher densities at lower cost and less weight than M28876 fiber system. Flexible field installatin with simple color coded tabs. Flexible assembly and maintenance with snap-fit fan out fibers. Rugged crush proof trunk cables. Already used in critical industrial applications. Commercial conversion kits available for M28876/NGCON/D38999 Military Fiber Systems. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1823&catid=421&subcatid=&category=Mil+Spec+Network+Cables&bc= | ||||||||
.jpg) | Fiber 485® Model 4127 HP Versalink Fiber to RS-485 Interface Converter ESL's Fiber Optic Converters Allow Connection of HP Fiber Optic Linked Terminals to RS-485 Port of Controller The RS485 / HP Versalink Fiber Interface Converters are used to connect fiber optic linked terminals to a controller having an RS-485/RS-422 interface port. While RS485 is a versatile communication standard, able to communicate over long distances and at fast data rates, conversion to a fiber optic communication standard also allows data transmission that is no longer susceptible to electrostatic or electromagnetic fields. Additionally, the ports of the connected terminals are protected from damage by potential differences (ground variations) that often exist between them. ESL's Fiber Converters Ideal for Casino / Gaming VLT Network Applications HP Fiber to RS485 Converter Features: RS-485 / RS-422 connection via a DB-15 connector. ESL's Media Converters convert RS-485/RS-422 Serial Communication Interface to HP Versatile Link plastic core cable. Copper interface features ESD and Transient Voltage protection. ESL's Fiber Optic Interface Converters provide full galvanic isolation (no metallic connection) between connected devices. Full duplex connection between two devices having RS-422 ports. Allows the interference-free fiber optical transfer of data to be utilized by the device having an RS-485/RS-422 interface. Data transfer rate up to 1 Mbps. Fiber connections via two standard Versatile Link connectors. Configurable for use at DCE or DTE (specify with order). Maximum Link Distance: greater than 500 meters (1640 feet) with 200 mm Hard Clad Silicon fiber cable. Provided with external wall-mount power supply, UL approved. This Fiber Converter is Ideal for casino data networks. HP Fiber to RS485 Converters Specifications: Data Transfer Rate: Up to 1Mbps Fibre Transmission Distance: 75m (250 ft.) using TC 1000 W type plastic fiber cable. RS-485/422 Transmission Data: Greater than 300 m (1000 ft.). Optical Fiber Connectors: HP/Agilent Versatile Link RS-485/RS-422 Connector: DB-15 Female on Model 4127, RJ-45 Female on Model 4129. Optical Cable Type: 1mm plastic optical film. Optical Wavelength: 660 nm (red). External Power Supply: 120 VAC, 60 Hz. Dimensions: 5.5" x 2.25" x 1.0" (139mm x 57mm x 25mm). Weight: 0.5 lb. (226 grams). Status Display: Red LED. Additional Info: http://www.electrostandards.com/ProductDetail/?productid=24 | ||||||||
.jpg) | Fiber 232, Models 4137 / 4139 HP Fiber / RS-232 Converters - Allow Connection of HP Fiber Optic Linked Terminals to RS-232 Port of Controller Models 4137 / 4139 Application The HP Fiber / RS-232 Converters are used to connect fiber optic linked terminals to a controller having an RS-232 interface port. While RS-232 is a versatile communication standard, conversion to a fiber optic communication standard also allows data transmission that is no longer susceptible to electrostatic or electromagnetic fields. Additionally, the ports of the connected terminals are protected from damage by potential differences (ground variations) that often exist between them. Fiber 232 Features: - Model 4137: RS-232 connection via an RJ-45 connector. - Model 4139: RS-232 connection via a DB-9 connector. - Converts RS-232 Serial Communication Interface to HP Versatile Link plastic core cable. - Provides full galvanic isolation (no metallic connection) between connected devices. - Full duplex connection between two devices having RS-232 ports. - Allows the interference-free fiber optical transfer of data to be utilized by the device having an RS-232 interface. - Data transfer rate greater than 20 Kbps. - Fiber connections via two standard Versatile Link connectors. - Configurable for use at DCE or DTE (specify with order). - Link distance: greater than 500 meters (1640 feet) with 200 mm Hard Clad Silicon fiber cable. - Provided with external wall-mount power supply, UL approved. Fiber 232 Specifications: - Data Transfer Rate: Greater than 20 Kbps - Fiber Transmission Distance: 75 m (250 ft.) using TC 1000 W type plastic fiber cable. - RS-232 Transmission Data: Greater than 15 m (50 ft.). - Optical Fiber Connections: HP/Agilent Versatile Link - RS-232 Connector: DB-9 female on Model 4139, RJ-45 female on Model 4137 - Optical Cable Type: 1mm plastic optical film - Optical Wavelength: 660 nm (red) - External Power Supply: 120 VAC, 60 Hz - Dimensions: 5.5" x 2.25" x 1.0" (139mm x 57mm x 25mm). - Weight: 0.5 lb. (226 grams) - Status Display: Red LED Additional Info: http://www.electrostandards.com/ProductDetail/?productid=283 | ||||||||
.jpg) | High Speed Ruggedized Fiber-to-USB Interface Converter The Model 4165 is a high speed ruggedized USB-to-Fiber interface converter from Electro Standards Laboratories. With its integrated rate buffering, the Model 4165 converts USB 2.0 compliant data from a standard PC to a serial asynchronous data interface over fiber with a user selectable baud rate of up to 3 Mbps. The Model 4165 is ideal for applications involving PC communications that require high speed, secure communications, and optical isolation. Typical applications include constructing an optically isolated point-to-point communications link between the USB ports of two PC's, or an optically isolated high speed communications link between a PC and a serial data network subjected to a high EMI environment that might corrupt communications over a copper interface. Designed to operate from -40C to +85C, it is a member of Electro Standards Laboratories rugged community media converter family. The unit features ESD protection circuitry on the USB I/O connector. The unit's power input is protected from transients and features 3kVDC isolation to prevent system ground loops. It can be powered from a wide input range of 10VDC-36VDC, with models also available for other voltage ranges such as 4.5VDC-9VDC and 19VDC-72VDC. Other features include user selectable fiber polarity, user selectable asynchronous data format, dual DB9 power connectors (board only) for convenience in bused power applications, Tx, Rx and Power indicator LEDs. The converter is available as a board only with front mounting threaded brackets for rack mounting in embedded applications. It is also available in a desk top package with DIN rail mounting hardware for applications that require an enclosure. Specifications: Fiber Interface: Connectors: Fiber Optic ST TX Power: -12.5 dBm RX Sensitivity: -27.5 dBm Optical Budget: 15 dB Max. Link Distance with 62.5/125µm fiber: 5.35 kM at up to 3 Mbps, 25°C 3.75 kM at up to 3 Mbps, -40°C to +85°C Wavelength: 820 nm/850 nm, multimode Fiber Size: 50/125 µm, 62.5/125 µm, 100/140 µm. Fiber Polarity: Logical 1 = Light ON/OFF: User Selectable Fiber Data Format: Type: Asynchronous, user selectable format Rate: User selectable baud rates from 300 bps to 3 Mbps Fiber-to-USB rate conversion: Internally buffered. USB Interface: Connectors: USB, Type B, High Retention USB Data Format: Type: USB 2.0 Compliant USB Client Rate: USB Data Transfer Rates Supports low speed (1.5 Mbps) Full speed (12 Mbps) Indicators: LEDs: TXD, RXD, PWR Power: Input Power: 10VDC-36VDC std 4.5VDC-9VDC 19VDC-72VDC Others at 1.5W Isolation: 3kVDC Connectors: Dual DB9F for Power Daisy Chaining (board only) DC Power Jack (desktop unit) Operating Environment: -40°C to +85°C Model 4166 Mechanical (Board Only): Model / Cat No: 4166 / 304166 Size: 4.8" x 3.9" x 0.63" Weight: Approx. 3.2 oz (91g) Mounting: Mounting Holes, Rt Angle Brackets Model 4165 Mechanical (Desktop Unit): Model / Cat No: 4165 / 304165 Size: 5" x 4.25" x 1.4" Weight: Approx. 9.8 oz (278g) Mounting: 4 Threaded Holes Std, DIN rail | ||||||||
.jpg) | High Speed Ruggedized Fiber-to-USB Interface Converter, Board Configuration The Model 4166 is a high speed ruggedized USB-to-Fiber interface converter from Electro Standards Laboratories. With its integrated rate buffering, the Model 4166 converts USB 2.0 compliant data from a standard PC to a serial asynchronous data interface over fiber with a user selectable baud rate of up to 3 Mbps. The Model 4166 is ideal for applications involving PC communications that require high speed, secure communications, and optical isolation. Typical applications include constructing an optically isolated point-to-point communications link between the USB ports of two PC's, or an optically isolated high speed communications link between a PC and a serial data network subjected to a high EMI environment that might corrupt communications over a copper interface. Designed to operate from -40C to +85C, it is a member of Electro Standards Laboratories rugged community media converter family. The unit features ESD protection circuitry on the USB I/O connector. The unit's power input is protected from transients and features 3kVDC isolation to prevent system ground loops. It can be powered from a wide input range of 10VDC-36VDC, with models also available for other voltage ranges such as 4.5VDC-9VDC and 19VDC-72VDC. Other features include user selectable fiber polarity, user selectable asynchronous data format, dual DB9 power connectors (board only) for convenience in bused power applications, Tx, Rx and Power indicator LEDs. The converter is available as a board only with front mounting threaded brackets for rack mounting in embedded applications. It is also available in a desk top package with DIN rail mounting hardware for applications that require an enclosure. Specifications: Fiber Interface: Connectors: Fiber Optic ST TX Power: -12.5 dBm RX Sensitivity: -27.5 dBm Optical Budget: 15 dB Max. Link Distance with 62.5/125µm fiber: 5.35 kM at up to 3 Mbps, 25°C 3.75 kM at up to 3 Mbps, -40°C to +85°C Wavelength: 820 nm/850 nm, multimode Fiber Size: 50/125 µm, 62.5/125 µm, 100/140 µm. Fiber Polarity: Logical 1 = Light ON/OFF: User Selectable Fiber Data Format: Type: Asynchronous, user selectable format Rate: User selectable baud rates from 300 bps to 3 Mbps Fiber-to-USB rate conversion: Internally buffered. USB Interface: Connectors: USB, Type B, High Retention USB Data Format: Type: USB 2.0 Compliant USB Client Rate: USB Data Transfer Rates Supports low speed (1.5 Mbps) Full speed (12 Mbps) Indicators: LEDs: TXD, RXD, PWR Power: Input Power: 10VDC-36VDC std 4.5VDC-9VDC 19VDC-72VDC Others at 1.5W Isolation: 3kVDC Connectors: Dual DB9F for Power Daisy Chaining (board only) DC Power Jack (desktop unit) Operating Environment: -40°C to +85°C Model 4166 Mechanical (Board Only): Model / Cat No: 4166 / 304166 Size: 4.8" x 3.9" x 0.63" Weight: Approx. 3.2 oz (91g) Mounting: Mounting Holes, Rt Angle Brackets Model 4165 Mechanical (Desktop Unit): Model / Cat No: 4165 / 304165 Size: 5" x 4.25" x 1.4" Weight: Approx. 9.8 oz (278g) Mounting: 4 Threaded Holes Std, DIN rail Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1797 | ||||||||
.jpg) | Model 4152 Very High Speed Ruggedized ST Fiber-to-Multi-Point RS485/422/232 Interface Converter - Ideal for RS485 Multi-Point Application The Model 4152 is a high speed ruggedized ST Fiber to RS485/422/232 interface converter from Electro Standards Laboratories. Typical operating speeds are up to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion. When operating in RS485/422 mode, the converter can be configured for 2-wire half duplex or 4-wire full duplex operation. This converter provides an industrial solution for applications requiring a single point-to-point or a multi-point communications link over short and long distances. Typical applications include PC to PC long distance communications, factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, ATMs and serial communications in harsh environments. The Model 4152 is designed to operate from -40°C to +85°C and is a member of Electro Standards Laboratories rugged community media converter family. The unit features ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. The unit's power input is protected from transients and features 3kVDC isolation to prevent system ground loops. It can be powered from a wide input range of 10VDC-36VDC, with models also available for other voltage ranges such as 4.5VDC-9VDC and 19VDC-72VDC. Other features include user selectable fiber polarity, dual DB9 power connectors (board only) for convenience in bused power applications, TX, RX, and Power indicator LEDs. The converter is available as a board only with front mounting threaded brackets for rack mounting in embedded applications. It is also available in a desk top package for applications that require an enclosure. Accessories include DIN rail mounting hardware and various AC input voltage power supplies. Specifications: Fiber Interface: Connectors: Fiber Optic ST TX Power: -12.5 dBm RX Sensitivity: -27.5 dBm Optical Budget: 15 dB Max. Link Distance with 62.5/125 µm fiber: 5.35 kM at up to 5 Mbps, 25°C 3.75 kM at up to 5 Mbps, -40°C to +85°C Wavelength: 820 nm/850 nm, multimode Fiber Size: 50/125 µm, 62.5/125 µm, 100/140 µm Fiber Polarity: Logical 1 = Light ON/OFF: Jumper Selectable Copper Interface: Connectors: DB9, Female Type: RS232, RS485 (2-wire/4-wire) Terminations: RS485 120 Ohm jumper selectable Bit Rate (nom.): RS232: 0 to 1.5 Mbps RS485/422 0 to 5 Mbps Network Configurations: RS232: Point-to-Point RS485/422 Point-to-Point Multi-Point (Default 280 uSec TX disable time) (User configurable TX disable time via a single thru-hole resistor) Indicators: LEDs: TXD, RXD, PWR Power: Input Power: 10VDC-36VDC std, 4.5VDC-9VDC, 19VDC-72VDC, Others at 1.5W. Isolation: 3kVDC Connectors: Dual DB9F for Power Daisy Chaining (board only), DC Power Jack (desktop unit) Operating Environment: - 40°C to +85°C Model 4153 Mechanical (Board Only): Model / Cat No: 4153 / 304153 Size: 4.8" x 3.9" x 0.63" Weight: 3.5 oz (99g) Mounting: Mounting Holes, Rt Angle Brackets Model 4152 Mechanical (Desktop Unit): Model / Cat No: 4152 / 304152 Size: 5" x 4.25" x 1.4" Weight: 10.1 oz (286g) Mounting: 4 Threaded Holes Std, DIN Rail Optional Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1824 | ||||||||
.jpg) | Model 4153 Very High Speed Ruggedized ST Fiber-to-Multi-Point RS485/422/232 Interface Converter - Ideal for RS485 Multi-Point Application The Model 4153 is a high speed ruggedized ST Fiber to RS485/422/232 interface converter from Electro Standards Laboratories. Typical operating speeds are up to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion. When operating in RS485/422 mode, the converter can be configured for 2-wire half duplex or 4-wire full duplex operation. This converter provides an industrial solution for applications requiring a single point-to-point or a multi-point communications link over short and long distances. Typical applications include PC to PC long distance communications, factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, ATMs and serial communications in harsh environments. The Model 4153 is designed to operate from -40°C to +85°C and is a member of Electro Standards Laboratories rugged community media converter family. The unit features ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. The unit's power input is protected from transients and features 3kVDC isolation to prevent system ground loops. It can be powered from a wide input range of 10VDC-36VDC, with models also available for other voltage ranges such as 4.5VDC-9VDC and 19VDC-72VDC. Other features include user selectable fiber polarity, dual DB9 power connectors (board only) for convenience in bused power applications, TX, RX, and Power indicator LEDs. The converter is available as a board only with front mounting threaded brackets for rack mounting in embedded applications. It is also available in a desk top package for applications that require an enclosure. Accessories include DIN rail mounting hardware and various AC input voltage power supplies. Specifications: Fiber Interface: Connectors: Fiber Optic ST TX Power: -12.5 dBm RX Sensitivity: -27.5 dBm Optical Budget: 15 dB Max. Link Distance with 62.5/125 µm fiber: 5.35 kM at up to 5 Mbps, 25°C 3.75 kM at up to 5 Mbps, -40°C to +85°C Wavelength: 820 nm/850 nm, multimode Fiber Size: 50/125 µm, 62.5/125 µm, 100/140 µm Fiber Polarity: Logical 1 = Light ON/OFF: Jumper Selectable Copper Interface: Connectors: DB9, Female Type: RS232, RS485 (2-wire/4-wire) Terminations: RS485 120 Ohm jumper selectable Bit Rate (nom.): RS232: 0 to 1.5 Mbps RS485/422 0 to 5 Mbps Network Configurations: RS232: Point-to-Point RS485/422 Point-to-Point Multi-Point (Default 280 uSec TX disable time) (User configurable TX disable time via a single thru-hole resistor) Indicators: LEDs: TXD, RXD, PWR Power: Input Power: 10VDC-36VDC std, 4.5VDC-9VDC, 19VDC-72VDC, Others at 1.5W. Isolation: 3kVDC Connectors: Dual DB9F for Power Daisy Chaining (board only), DC Power Jack (desktop unit) Operating Environment: - 40°C to +85°C Model 4153 Mechanical (Board Only): Model / Cat No: 4153 / 304153 Size: 4.8" x 3.9" x 0.63" Weight: 3.5 oz (99g) Mounting: Mounting Holes, Rt Angle Brackets Model 4152 Mechanical (Desktop Unit): Model / Cat No: 4152 / 304152 Size: 5" x 4.25" x 1.4" Weight: 10.1 oz (286g) Mounting: 4 Threaded Holes Std, DIN Rail Optional Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1825 | ||||||||
.jpg) | High Speed Fiber-to-USB Converter/Extender, Host & 4-Port Hub
The Desktop Units, Models 4662 and 5169, or the DIN Rail Mounted units, Models 4662-DIN and 5169-DIN, comprise, a Host and a Four Port USB Wired Hub that extend USB connections up to 500 meters via a high speed Fiber interface. Features:
Two configurations are available for each model:
Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2242 | ||||||||
| |
