Copper Switches from Electro Standards Laboratories

Products / Services:

	Click on a category to see this company's sample pictures for the chosen category.
	Cable Mil-Spec Cable Assemblies Data Electronic Fiber Optic Cable Connectors Clamps Flat Pneumatic Converters: Media Ethernet Fiber Optic Interface RS232 to RS485 Data Acquisition Systems Fiber Optic Connectors Indicators Load Cell Strain Gage Network Testers Repeaters Network Signal Conditioners Switches: Ethernet Copper Fiber KVM Network USB Testing Equipment Network

Electro Standards Laboratories

Cranston, RI

E-mail Company

Visit Website

Phone: 401-943-1164

Fax: 401-946-5790

* Click on an image to enlarge it in a new window *

Model 4123 Automatic Sensing A/B Switch with Remote Management Port. Model 4123 automatically switches to the port with valid activity. Remote access can be accomplished by RS232 commands sent via the Remote Serial Port. Users can remotely monitor status and control switch functions. M4123 allows a device connected to the Common port to connect through to the port with activity either on A or B. It maintains the connection with the currently connected port as long as there is activity on it. The unit monitors data activity on both port A and B. If activity on the currently connected port is lost, and if the other port has established valid activity, the unit automatically switches to that port with activity.

Attn: Government Agencies: GSA Schedule GS-35F-0193P. Electro Standards adds products frequently to its GSA Product Line. Call with your requirements.

All ESL products are available for export.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=208

The Model 4410 Remotely Controllable RS-232 A/B Switch. Model 4410 monitors its COMMON port for specified trigger character sequence. M4410 can be controlled manually or from a remote location. To switch manually, a front panel pushbutton allows the user to manually control the switch position. To switch remotely, the COMMON port RS-232 device is monitored for a specific ASCII character sequence. If received, the unit will switch to the prescribed port, either A or B. In either mode of operation, the front panel LED indicators display the switch operation, the front panel LED indicators display the switch position.
GSA Schedule: GS-35F-0193P. This products is availabe on GSA Schedule!

All ESL products are available for export.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=210

Model 4426 RJ45 6-1 Switch with RS-232 Serial Remote Control Port. Model 4426 provides local and remote RS-232 access functionality. Ethernet - Copper

The Model 4426 RJ45 6 -1 Switch allows the user the capability of sharing a single port RJ45 interface device connected to the "COMMON" port among up to six other devices connected to the "A", "B", "C", "D", "E", and "F" ports.

All ESL Products are available for export.
Attn: Government Agencies: ESL GSA Schedule GS-35F-0193P. Electro Standards adds products frequently to its GSA Product Line. Call with your requirements.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=230

The Model 4520 is a DB15 Interface A/B Switch. Each of the A, B, and COMMON ports are DB15/female. The switch allows a device connected to the COMMON port to be shared between two devices; one connected to Port A, the other to Port B. For local control, a front panel pushbutton changes the switch position. Switch position and power status is displayed on the front panel LED's.

The unit also includes a DB9 Remote port on the rear panel. A simple dry contact closure across the specified pins of the Remote port provides the change position command to the switch. Lockout pins on the Remote port, when shorted, lockout front panel control of the
switch position.

GSA Schedule: GS-35F-0193P. This products is available on GSA Schedule.
All ESL products are available for export.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=205

The Pathway® Model 5014 DB25 A/B/C network switch provides one channel of switching in a low profile, 19-inch 1U rack unit. The user has the capability of sharing a single DB25 interface device connected to the Common port among three other devices connected to the A, B, and C ports.

The switch may be controlled locally by manually operating the front panel pushbuttons or remotely via the rear panel Remote connector. The Remote control interface accepts contact closure signals received from a distant located control unit such as the Model 5015 Remote Control Unit, Catalog No. 303015 (See Features Below).

Model 5014 A/B/C Switch Features:

Local Control (front panel) via 3 selector pushbuttons labeled A, B & C.
Display, three LED's indicate switch state.
Remote Control Port (input) on rear panel, RJ45 (F) connector.
Switches all 25 pins.
Retains last switch position in event of power loss.
Rackmount configuration.
Optional Model 5015 Control Unit, Catalog No. 303015.
Includes 115VAC/60 Hz wallmount power supply.
Electro Standards manufactures a wide range of RS-232 switches.
Model 5014 Specifications:

PORT CONNECTORS: A, B, C and COMMON ports (rear panel) are DB25 (F) connectors.
FRONT PANEL PUSHBUTTONS: (3) Pushbuttons on the front panel allow local switching.
DISPLAY: (3) Led's display switch postion and power status.
REMOTE CONTROL: (1) RJ45 female connector on rear panel accepts contact closure signal commands from a remote device. (Model 5015, Cat No 303015)
POWER: UL Approved 120 VAC / 60 Hz wall mount power module supplies 12VDC, 500mA to the unit.
DIMENSIONS: 19" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 2.0 lbs. (0.9 Kg)

Option: Wide Range Power Module: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=257

The PathWay® Model 7006 Remotely Controllable Cat 5 RJ45 A/B/Offline Switch Modules can be controlled locally or from a remote location. A pushbutton switch on the front panel of each module allows the user to locally control the switch function. An RS-232 CONTROL port on each module facilitates remote switching.

A computer or terminal device connected to the CONTROL port can activate the remote mode of operation. When the proper instructions are received, the unit will switch the prescribed port to either A, B, or secure Offline.

Features of Model 7006 Switches:

Each module allows access to two Cat 5 RJ45 networks from one COMMON network or device.
Switches all 8 pins of the RJ45 interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Rated for 10/100 Base-T networks (up to Cat 5).
Local control via front-panel pushbutton.
Remote control port allows off-site monitoring and switch management.
Secure Off-Line switch position.
The REMOTE port accepts RS232 Serial data ASCII commands for switch position control and monitoring.
Front panel tri-state LED's display switch position and power status.
Retains last switch position in the event of power loss and continues to pass data.
Rugged aluminum case provides EMI/RFI shielding.
These modular rackmount switches are designed to be mounted in a Model 9030 rack.
Custom length data cables available for your switch installation.
Features of Model 9030 Rack with Power Supply and Cabling:

Model 9030 Rack includes a power distribution module, a wall mount power supply which provides power to all the switches in the rack and power bus cable which distributes power to all eight modules.
Rack Size: 19" W x 5.25" H x 7" D. (48.3 x 13.3 x 17.8 cm)
The Model 9030 Rack can accommodate up to eight switch modules.
Filler panels are available to cover unused module slots.
2" filler panel: Catalog No. 305983
Municipalities, schools, government: These products are on GSA Schedule!

Specifications for Model 7006 Switches:

PORT CONNECTORS: (3) RJ45 female connectors labeled A, B, and COMMON.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) High intensity front panel LED's display switch position and power status.
REMOTE CONTROL: (1) RJ45 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
POWER: Requires 12 VAC, 0.5A (usually supplied by the power module included in a Model 9030 Module Rack.
DIMENSIONS: Module 2.0" W x 5.0" H x 7.0" D.
(5.1 x 12.7 x 17.8 cm).
WEIGHT: Approximately 0.6 lbs. (0.3 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=231

PathWay Model 7146 6-Channel Normal/Bypass Switch, E1 Interface with Remote Control

- Allows New Equipment to be Added-To or Bypassed From E1 Data Links

Six-Channel System Switch: Model 7146
Model 7146 has six complete Normal/Bypass switch functions in the rackmount enclosure of 2U high (2U is 3.5 inches) x 19 inches wide x 8 inches deep. Twenty-four RJ48 connectors, one Remote Control connector and one Power connector are on the rear panel. Each switch channel is able to be switched singly or all channels as a group.
Only one power supply is needed.

The Model 7146 6-Channel Normal Bypass Switch, E1 Interface with Remote allows the user the capability of accessing four separate devices per channel and setting each group of devices to a pre-determined configuration based on whether the channel is set to Normal or Bypass. Each switch may be controlled manually via a front panel pushbutton or remotely from an RS232 serial port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the remote RS-232 serial port (DB9) located on the rear of the unit. All 8 pins of the RJ48 are switched.

FEATURES:
- Rackmount Configuration.
- Local ore Remote Control.
- LED's Display Switch Position.
- Automatic Switch to Bypass, if data activity is lost.
- Automatic Switch to Bypass mode, if power is lost.
- E1 ports are RJ-48 Connectors located on the rear panel.
- Model 7146 is a 6-Channel unit.
- Channels can be switched independently.
- UL approved wall mount power module supplied with unit.
- Power module accommodates wide voltage range.
- A 3-Channel unit is also available (Model 7143, Cat 307143)
- A 1-Channel unit is also available (Model 7141, Cat 307141)

Specifications:
Port Connectors: (24) RJ48 female connectors (Four connectors labeled 1, 2, 3, 4, for each of the six channels).
Front Panel Controls: (6) Manual pushbuttons allow local switching.
Display: (12) Front panel LED's display switch position and power status.
Remote: (1) DB9 (F) connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
Power: UL approved 100 - 240 VAC, 47-63 Hz wall mount power module supplies 12 VDC, 2.0A power.
Dimensions: Rackmount 19.0" W x 3.5" H x 8.0" D
Weight: Approximately 4.5 lbs

Power Module (Cat No. 516265) is supplied with All Normal / Bypass Switch Models.
The UL Approved wall mount power module plugs into a 100-240 VAC / 47-63 Hz wall receptacle and supplies the Bypass Switch with 12 VDC / 2.0A power.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=245

The PathWay Model 7202 BNC A/B Switch with Remote allows the user the capability of accessing two separate BNC ports via the COMMON port. The switch may be controlled manually via a front panel pushbutton or remotely from a DB9/female RS-232 serial port located on the rear panel. Switch position status may be attained via the front panel LED display or the remote RS232 serial port located on the rear of the unit.

Features:

Allows quick connection to any one of two BNC interface devices from one COMMON device.
(3) Isolated BNC connectors on rear panel.
Center pin and shell of each BNC connector are switched.
Eliminates the need to plug and unplug cables.
Local control via front-panel pushbutton.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch position and control.
Front panel LED's display switch position and power status.
Retains last switch position in the event of a power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length BNC coaxial cables available for your switch installation.
Municipalities, schools, government: This product on GSA Schedule!
Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

Specifications:

PORT CONNECTORS: (3) Isolated BNC coaxial connectors, A, B & COM.
FRONT PANEL CONTROL: (1) manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) DB9 (F) REMOTE connector on rear panel accepts
ASCII RS232 Serial Data.
POWER: UL approved 120 VAC, 60 Hz wall mount power module supplies
12 VDC, 500mA to the unit.
DIMENSIONS: Desktop 2.0" H x 5.25" W x 7.25" D.
WEIGHT: Approximately 2.0 lbs.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=249

The PathWay® Model 7208 DB15 Interface A/B/C/D Switch provides switching in a compact desktop unit. The Model 7208 network switch allows the user to share a single DB15 interface device connected to the Common port among four other devices connected to A, B, C, and D ports.

There is no local or front panel switch controls on this network switch. The Model 7208 can ONLY be switched remotely from the DB9 female serial interface Control port located on the rear panel. The front panel LED display indicates the switch position and unit power status.

The switched DB15 / female ports (A, B, C, D and COMMON) are transparent to all data. All 15 signals of the DB15 connector interface are switched.

Features:

Allows quick connection to any one of four devices from one COMMON device.
An RS232 DB9 / female REMOTE port allows remote control of unit based on a set of ASCII commands.
Remote commands allow change of position, query of position, lockout of front panel controls. The ASCII command set is as follows:
"CTRL-A" created by holding down the [CTRL] and [A] key on the keyboard, changes the switch position to "A";
"CTRL-B" changes the switch position to "B";
"CTRL-C" changes the switch position to "C";
"CTRL-D" changes the switch position to "D";
"CTRL-P" queries the switch position status.
All DB15 leads are switched.
Transparent to data speed and format.
Front panel LED indicators display the switch position and power status.
Switch position and connection through the switch are maintained during power loss.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB15 cables available for your switch installation.
Municipalities, schools, government: On GSA Schedule GS-35F-0286V!
Specifications:

PORT CONNECTORS: (5) DB15 female connectors labeled
A, B, C, D, and COMMON.
DISPLAY: (5) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) DB9 female connector on rear panel accepts
RS232 Serial Data for Remote Control operation.
POWER: UL approved wall mount 120VAC, 60Hz power module supplies
12 VDC, 500 mA to the unit.
DIMENSIONS: Desktop Configuration, 7.75" W x 2.82" H x 7.25" D.
(19.7 x 7.2 x 18.4 cm)
WEIGHT: Approximately 3.5 lbs. (1.6 Kg)

Option: Wide Range Power Supply:
(Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=204

The PathWay® Model 7212 Remotely Controllable DB25 Interface A/B Network Switch allows the user to share a single DB25 interface device connected to the Common port among two other devices connected to the A and B ports. The Model 7212 network switch may be controlled manually via pushbutton or remotely from an RS-232 serial port located on the rear of the unit. Switch position status may be attained via front panel LED display or via remote RS232 serial port.

Operation:
Switched Ports: The switched DB25 ports are transparent to all data. The ports may be switched via the front panel pushbutton or the remote control port on the rear of the unit.

Switch Control: The switch position may be controlled manually via a front panel pushbutton located on the front of the unit, or remotely from a remote RS232 serial port located on the rear of the unit. To switch manually simply press the front panel pushbutton and the switch will change to the new selected position as indicated by the front panel LED's. Remote switching of the unit is done through an RS232 (DB-9) serial port located on the rear of the Model 7212, which may be connected to any standard RS232 port on a computer.

Features:

The Model 7212 AB network switch allows an RS232
device that can send ASCII characters to control the
switching function of the DB25 interface.
Ideal for remote control applications.
Switch position and continuity are maintained in
event of power failure.
Front panel pushbutton for on-site switching.
LEDs display switch position and power status.
Rugged aluminum case provides EMI/RFI shielding.
Other control configurations and interfaces are
available upon request.
Optional support of all 25 signal lines.
Standard cables and extended distance
cables are available.
Electro Standards manufactures a wide range
of RS-232 data network switches.
Specifications:

PORT CONNECTORS: (3) DB25 (F) connectors
labeled A, B, and COM ports.
LEADS SUPPORTED: 1-8, 20
REMOTE: (1) DB9 female connector on rear panel accepts
ASCII RS232 Serial Data for Remote Control operation.
FRONT PANEL CONTROL: (1) Front panel pushbutton
allows selection of switch position.
DISPLAY: (2) LED's on front panel indicate
switch position and power status.
POWER: UL approved 120 VAC, 60 Hz, wall mount
power module supplies 12 VDC, 500mA to the unit.
DIMENSIONS: 1.75" H x 19.0" W x 8.0"D.
WEIGHT: 2.5 lbs.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=213

A New Ruggedized Manual Data Network Switch from Electro Standards!Model 4504 Manual, Desktop,
Ruggedized DB25 A/B Network Switch

Ruggedized to Withstand Environmental Challenges!
APPLICATIONS: Mobile applications, motion applications,
and applications with harsh environments.

The Model 4504 manual data network switch was designed to withstand an environment subject to vibrations. Model 4504 is ideal for mobile/motion applications, or any other harsh environment application.

The Model 4504 data switch allows data to pass through 24 pins of the DB25 connector interface and switches the 24 pins simultaneously. The Model 4504 is available with mounting brackets to secure it to a panel.

Features:

Model 4504 AB manual network switch switches pins 2 to 25 of connector interface, simultaneously. Chassis Ground on pin 1 bussed thru.
Ruggedized to withstand vibrations encountered in mobile/motion applications
Switch configuration has passed rigorous seismic testing
Ideal for mobile/motion applications
Copper data network switch
Rugged all-aluminum enclosure provides EMI/RFI resistance in noisy environments
Optional "mounting ears" allow firm attachment
Manual network switch, no power required
Lifetime guarantee!
Electro Standards manufactures a wide range of RS232 data network switches.
Specifications:

CONNECTORS: (2) DB25 (F) connectors labeled "FAX" and "COMM SERVER" and (1) DB25 (M) connector labeled "COMMON" are located on the rear panel.
CONTROL: Two position rotary switch control located on the front panel.
The switch positions are labeled "FAX" and "COMM SERVER."
DESKTOP SIZE: 4.18" W x 6" D x 3.5' H
WEIGHT: Approx. 2.5 lbs.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=150

The PathWay® Model 7232 allows the user to switch between two RJ45 interface devices locally or remotely. Red LED's indicate the switch position as well as the front panel access locked status. The LED's in the steady state indicate the position of the switch. If the front panel access has been locked, both "A" and "B" position LED's will light when the pushbutton is pressed. Both LED's will remain lit until the button is released. Then they will return to the displaying position status.

Remote access can be accomplished by RS232 commands sent via the Remote Serial Port. Users can remotely monitor status, control switch functions, and lockout the front panel pushbutton.

Features:

Allows quick connection to any one of two devices from one COMMON device.
The PathWay® Model 7232 AB network switch ports are transparent to data speed and format.
All 8 leads of the RJ45 interface are switched.
All switched signals are passed via copper contact relays that
maintain their position and continuity in the event of a power failure.
Front panel pushbutton control or Remote ASCII Command access
through the serial port.
Front panel LEDs display switch position and power status.
Remote Control Lockout of front panel pushbutton.
Wallmount style case, key-shaped mounting holes on bottom cover.
Custom length RJ45 cables are available.
Specifications:

CONNECTORS: (3) RJ45 for A, B, and COMMON.
CONTROLS: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LEDs display switch position and power status.
REMOTE: (1) DB9 female connector on rear panel accepts ASCII RS232
Serial Data for Remote control operation.
POWER: UL Approved 120VAC, 60 Hz wall mount power module supplies
12VDC, 500mA to the unit.
PACKAGING: All aluminum case provides EMI/RFI shielding in noisy environments.
in noisy environments.
DIMENSIONS: 8" w x 2.85' H x 7.25" D (20.3 x 7.2 x 18.4 cm)
WEIGHT: Approx. 2.5 lbs (1.1 kg)
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.
OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed table mount power module, 100 VAC / 240 VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=234

The PathWay® Model 4121 Automatic Fallback Data Network Switch with Remote Management Port allows the user the capability of sharing a single DB25 interface device connected to the Common port among two other devices connected to the A and B ports.

The unit monitors data activity on port A. If activity is lost, the unit automatically switches to port B. The Model 4121 will maintain its connection to port B while data activity is not present on port A. At any point, if data activity is detected on port A, the unit will automatically return to the A position. The user can override automatic fallback operation from the front panel and force the unit to operate as an A/B switch. The user can monitor as well as control the unit remotely through the Remote DB9 port by way of RS232 commands.

The Model 4121 dimensions are 7.9"W x 2"H x 7.25"D. (20.1 x 5.1 x 18.4 cm)

Features:

Allows access to two networks from one COMMON network device.
Local control via front-panel pushbutton.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control and monitoring.
Automatic Fallback and Recovery Mode operates based on data monitoring on signal pins 2 and 3 of port A.
Switches pins 1-8, 11, 14-21, and 24 of the DB25 interface.
Transparent to data speed and format.
Front panel LED's display switch position and power status.
Retains last switch position even in the event of a power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB25 cables available for your switch installation.
Municipalities, schools, government: On GSA Schedule!
Specifications:

PORT CONNECTORS: (3) DB25 female connectors labeled A, B, and COMMON.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LEDs display switch position and power status.
REMOTE CONTROL: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
POWER: UL approved wall mount 120 VAC / 60 Hz power module supplies 12VDC, 500 mA to the unit.
DIMENSIONS: Desktop configuration 2.0" H x 7.9" W x 7.25" D (20.1 x 5.1 x 18.4 cm)
WEIGHT: Approximately 2.8 lbs. (1.27 Kg)
Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=207

Path Way® Model 4148 Normal/Redundant
Fallback Network Switch

The PathWay® Model 4148 allows data broadcast, TD of the RS232 interface, from two data origination devices to be channelled to two devices designated as destination devices.

Features:

Model 4148 data network switch will self-configure its connectivity based on the devices connected to it, or the user can override its connection status from a manual front panel pushbutton.
Four front panel LEDs display the connectivity status and verify power connection at all times.
Copper network switch, LAN switch
Automatic Operation:

During Normal mode, the origin device connected to Port D1 is connected to port COM1; and the device connected to port D2 is connected to port COM2.
If the RTS signal is lost from the device connected to D1, the Model 4148 changes to Redundant Fallback mode and automatically broadcasts the data from the D2 device to both destination devices.
If the RTS signal is lost from the device connected to the D2, the Model 4148 automatically broadcasts the data from the D1 device to both the devices COM1 and COM2.
Manual Override Operation:

To override Automatic Operation, the user simply depresses the front panel pushbutton and holds it for 5 seconds and releases.
Momentarily depressing and releasing the pushbutton then allows the user to change the switch connectivity.
To change back to Automatic Operation, depress and hold the pushbutton for 5 seconds and the switch will automatically connect.
Specifications:

Controls: (1) Front panel pushbutton.
Indicators: (4) High intensity red LEDs
Signals Supported: TD, RTS, GND
Connectors: (4) DB9/F data signal interface; (1) power jack.
Power: 115VAC 60 Hz (wall transformer)
Dimensions: 7.75" W x 2.0" H x 7.5" D.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=248

Model 4404 Remote Power Reboot Switch with 10-Base-T LAN/WAN Access.
Can Reboot Eight Remote Devices...
The Power Reboot Switch with 10 Base-T LAN/WAN Remote Access permits the user to cycle power to eight remotely located devices that may become locked up.

Easy to Use...
The PathWay® Model 4404 Power Reboot Switch can be strategically located near equipment prone to lock up problems. Those units plug into the Model 4404 AC power outlets. The connected devices can be remotely restarted by the user by accessing the Model 4404 via a 10 Base-T connection. By simply entering in the IP address of the Power Reboot Switch into a standard Web browser, a graphical representation of the Power Reboot Switch is accessed. The user chooses any of eight AC outlets individually, or in groups, and removes and restores power, allowing the selected peripheral to re-initiate and resume normal operation.

Controls, Connections, Indicators, and Such...
The front panel controls include a System Reset pushbutton to set the unit to factory default. Indicator LED's display the power, switch position, and LAN presence for remote control. There are eight power outlets on the rear panel grouped into two circuits of four. Each circuit is supported by a single 120 VAC input with a maximum current rating of 15 Amps. Each outlet within the circuit can switch up to the rated 15 Amps.

Features:
Access User Interface via standard Web browser.
No special software required.
Login username and password authentication required.
Easy to use, simple point and click operation.
Remote access to control or monitor the 8 power outlets of the
Model 4404 Power Reboot Switch.
User privilege level configuration creates users with different authorities.
IP Addressable Data Network Switch! LAN access gives users across the LAN
or over the Internet access to control the switch.
Rackmount Dimensions: 19" W x 3.5" H x 10.0" D. (48.3 x 8.9 x 25.4 cm)
Weight: Approximately 5.0 lbs. (2.3 Kg)
Municipalities, schools, government: On GSA Schedule!
Specifications:

POWER: (2) 120 VAC, 60 Hz (inputs)
DISPLAY: (4) Port Status LEDs and (2) Line Power LEDs
CONNECTIONS: (8) 120 VAC outlets.
USER CHANNELS: Eight Power Channels
REMOTE: (1) RJ45 on rear panel accepts 10 Base-T Ethernet interface LAN/WAN access for Remote control operation.
DIMENSIONS: Rackmount Configuration, 19.0" W x 3.5" H x 10.0" D. (48.3 x 8.9 x 25.4 cm)
WEIGHT: Approximately 5.0 lbs (2.3 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=260

The PathWay® Model 4515 AB network switch allows sharing of a device connected to a single pin of each RJ11 interface port (the COMMON port pin) between two other devices connected to the A and B pins for each port. Remote access via a Web-based GUI interface through 10/100 BASE-T Ethernet connection or via ASCII commands sent to the unit via an RS232 connection.

Click on our Detailed Spec Icon to see Screen Captures and Application Diagram!

Features:
The switched pins are transparent to all data.
RJ11 interface each port, 1-8.
Each port has (4) active contacts: Normally OPEN; Normally CLOSED;
The WIPER contact of the relay; and a pin for SG (signal ground referenced
to the switch unit).
Switch position controlled remotely via either of two remote control ports:
RJ45 10/100 BASE-T Ethernet port, or a DB9/female RS232 Serial port.
IP Access control of the unit by entering the IP address into a standard
Web browser such as Netscape or Internet Explorer.
IP address is static and manually configurable.
View status of each port and control each port independently
for Web browser.
Serial port remote control by sending ASCII character commands
to the unit. Command set allows the user to change position of each port;
query status of each port.
(16) Front panel LEDs display the status of each port relay.
The unit defaults to the Normally CLOSED position in event of power loss.
External power supply plugs into 90-240 VAC 50/60 Hz outlet. The operating temperature range of the supply is 0° to 70 ° C.
Software Features:

Access User Interface via standard web browser.
Login password authentification required.
Easy to use, simple point-and-click operation.
Remotely access to control or monitor the Model 4515 Switch System
User's can change the login password and/or the switch's IP address.
LAN access gives the user across the LAN or over the Internet access
to control if user network is configured accordingly.
Specifications:

CONNECTORS: (8) RJ11 connectors, ports 1 - 8.
REMOTE A: (1) DB9 / female, RS232 serial interface port.
REMOTE B: (1) RJ45 connector, 10/100 BASE-T Ethernet interface port.
(1) Power jack.
DISPLAY: (16) LED's to indicate position status and power.
POWER: UL Approved 110 VAC / 60 Hz Wall Mount Power Module supplies
12 VDC / 0.5 Amp (included with Model 4515).
DIMENSIONS: 2.7' H x 7.8" W x 7.25" D.
WEIGHT: 3 lbs.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=251

Path Way® Remotely Controllable Network Switch
Model 4521 Single Channel HD15 A/B Switch
with Contact Control Remote Port

The PathWay® Model 4521 Single Channel HD15 A/B Network Switch allows a device connected to COMMON port access to the A or B port. The M4521 network switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB9 contact control Remote port. The DB9 Remote port provides control by dry contact open/closure logic. The front panel LED display indicates the switch position and unit power status.

Features:
Model 4521 AB network switch allows a device connected to
COMMON port access to the A or B port.
Control manually via pushbutton.
Control remotely via DB9 Contact Control Remote port.
The DB9 Remote port provides control by dry contact open/closure logic.
Front panel LED displays switch position and power status.
All 15 signal lines of each HD15 port connector are switched and are
transparent to all data.
Specifications:

Port Connectors: (3) HD15 (F) connectors for ports A, B, and COMMON.
Remote: (1) DB9 (F) connector on rear panel allows remote switch
control via contact closure.
Local Control: (1) Pushbutton for local switch control.
Display: (2) LEDs on front panel indicate switch position.
Power: The unit requires 24 volts DC power supplied to pins
7 and 8 of the Remote connector.
Dimensions: 7.8" W x 2.9" H x 7.25" D.
Weight: Approx. 3 lbs.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=253

Model 4875 Remotely Controllable Special Interface KVM A/B Switch.
The PathWay® Model 4875 AB switch allows the user the capability to access either of two computers from a single set of KVM devices. The keyboard, monitor, and mouse devices are connected to the Common set of ports, and the computers are connected to the A and B set of ports.

The switch position can be controlled manually via front panel pushbutton, or remotely via a simple contact closure connected to the RJ45 Remote port. Remote switching can be achieved by connecting to either of the optional remote units: Model 4856 Single Channel Console Remote (Cat. #302074), or the Model 4855 16 Channel Area Remote unit (Cat. # 302071). Remote switching can also be achieved by connecting to your contact closure device.

Features:
PS/2 mouse port emulation
Video port signals are regenerated
Video resolution up to 1920 x 1440
Video bandwidth 200 MHz
Custom RS422 keyboard port
Mouse, Monitor & Keyboard all switched simultaneously
Supports hot plugging the mouse port
Switch via front panel pushbutton or remotely via contact closure
Desktop enclosure
Remote port connection details:
If the Model 4875 detects a transition from open to closure and remains closed across pins 2 & 3, the unit will switch to the B position. If the Model 4875 detects a transition from closed to open and remains open across pins 2 & 3, the unit will swtich to the A position.

Specifications:
Rear Panel Connectors:
Keyboard Ports: (3) DB25/F connectors, keyboard ports A/B/COMMON,
supports pins 2, 3, 4, 5, 6, 7, 8, 20.
VGA Monitor: (3) HD15/F connectors, VGA monitor ports, A/B/COMMON,
full VGA interface supported.
PS/2 Mouse Ports: (3) Mini-Din-6/F connectors, PS/2 mouse ports, A/B/COMMON, full PS/2 interface supported.
(1) Modular RJ45 connector, Remote port.
(1) Power jack.
Power Supply: Auto-ranging external power module, 90 - 265 VAC, 50/60 Hz, 10 Watts.
Front Panel Controls: (1) pushbutton.
Indicators: (2) Red LED status indicators.
Size: 2.82" H x 7.94" D x 7.25" W (7.2 x 20.2 x 18.4 cm).
Weight: 2 lbs (0.9 Kg)
MTBF: 100,000 hours.
Operating Temperature: 5 - 45 degrees C.
Humidity: 10% - 90%.
Altitude: 0 - 7000 ft. above sea level.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=144

Model 5150 Keylock Video Conference Room
Secure Switching System

This Videoconference Room Secure Switching System is an important Videoconferencing equipment requirement.
"NON-SECURE" Mode (Key in DATA PASS position)

In this mode, the Model 5150 Video Conference Room Secure Network Switching System passes the connection of copper and fiber voice and data lines from the conference room equipment to the building data network.

"SECURE" Mode (Key in OFF-LINE position)

In this mode, the Model 5150 Video Conference Room Secure Network Switching System disconnects the same set of lines from the building data network, isolating all of the conference room equipment, completely.

Install the Model 5150 Secure Switching System with listed modules, or customize with the assistance of "The Switch Experts" - Electro Standards Laboratories!

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=110

The Pathway® Model 7236 is controlled locally via front-panel pushbutton, or remotely via DB9 REMOTE port located on the rear panel. The REMOTE port supports both RS232 ASCII command set control and contact open/close control. RS232 ASCII command set includes change switch position, query switch position and lockout front panel pushbutton control.

Model 7236 Base Switch Features:
Switches all (8) RJ45 port channels simultaneously,
all (8) signals of each port are switched.
All (24) ports A, B, and COM of each channel are RJ45.
Switch position and signal pathway integrity are maintained
during power loss -no interruption of data transmission.
Transparent to data.
LED display provides switch position and power status.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Click here or on GSA icon for details.
Optional Ethernet Remote Port, I.P. Addressable (with GUI) (Cat No. 306237):
The RJ45 10/100BaseT Ethernet port allows I.P. Addressable (with GUI) Remote access from a standard Web browser by simply entering the IP address of the switch. Access is permitted after the password is authenticated. User privileges are configurable by the supervisor status user. Graphical representation allows simple point and click control.

Optional Rackmount Kit: (Cat No. 512433):
Overall unit size with rackmount ears, 19" W x 14" D x 3.5" H (2U Ht.) (48.3 x 8.9 x 35.6 cm)

Optional Wide Range Power Module: (Cat No. 517277):
CE and UL listed table mount power module 100VAC/240VAC 50/60 Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Specifications:
PORT CONNECTORS: (3) RJ45 female connectors labeled A, B, and COMMON
for each of the channels.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE: (1) DB9 female connector on rear panel accepts contact closure
for Remote Control operation.
POWER: UL approved 120VAC, 60Hz wall mount power module supplies
12 VDC, 500mA to the unit.
DIMENSIONS: 16.75" W x 3.5" H x 14.0" D. (42.5 x 8.9 x 35.6 cm)
WEIGHT: Approximately 10.0 lbs. (4.5 kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=235

Model 7238 16-Channel RS232 A/B Switch with Remote Access.
Model 7238 Base Switch Features:

Switches all (16) RJ45 port channels simultaneously, all (8) signals of each port are switched.
All (24) ports A, B, and COM of each channel are RJ 45
Switch position and signal pathway integrity are maintained during power loss -no interruption of data transmission
Transparent to data
LED display provides switch position and power status
Model 7238 Operation:
This switch is controlled locally via a front-panel pushbutton, or remotely via DB9 REMOTE port located on the rear panel. REMOTE port supports both RS232 ASCII command set control and contact open/close control. RS232 ASCII command set includes change switch position, query switch position and lockout front panel pushbutton control.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Click here or on GSA icon for details.
Optional Ethernet Remote Port, I.P. Addressable (with GUI) (Cat No. 306237):
The RJ45 10/100BaseT Ethernet port allows I.P. Addressable (with GUI) Remote access from a standard Web browser by simply entering the IP address of the switch. Access is permitted after the password is authenticated. User privileges are configurable by the supervisor status user. Graphical representation allows simple point and click control.

Optional Rackmount Kit: (Cat No. 512433):
Overall unit size with rackmount ears, 19" W x 14" D x 3.5" H (2U Ht.)

Optional Wide Range Power Supply: (Cat No. 517277):
UL approved 100 - 240 VAC 50/60 Hz.

Specifications:
PORT CONNECTORS: (3) RJ45 female connectors labeled A, B, and COMMON
for each of the channels.
FRONT PANEL CONTROLS: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE: (1) DB9 female connector on rear panel accepts contact closure
for Remote Control operation.
POWER: UL approved 120 VAC, 60Hx wall mount power module supplies 12VDC to the unit.
ENCLOSURE: All aluminum enclosure designed to be EMI/RFI resistant.
DESKTOP SIZE: 16.75" W x 14" D x 3.5" H. (42.5 x 8.9 x 35.6 cm)
Weight: 10.0 lbs. (4.5 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=236

Model 7224 X.21 Interface DB15 A/B Switch, Remotely Controllable.

The PathWay® Model 7224 X.21 Interface AB Switch allows two X.21 interface devices to share one X.21 dataline connected to the Common port. This unit is supplied complete with a wide-range power module that accepts your international IEC power cable.

Features:
Model 7224 network switch is ideal for remote control switching applications.
Front panel switching can be locked out from a PC connected to the Remote port.
19" Rackmount option is available.
Switch position and signal integrity is maintained even during a power failure.
A wide range UL approved power module is supplied with the unit (90 to 264 VAC) and 47 to 62 Hz to cover North American and European applications).
Optional Windows compatible control software is available.
Transparent to data speed and format.
Specifications:

Dimensions: 7.75" W x 2.75" H x 7" D.
Power: Power Module: 90 - 264 VAC, 47-62 Hz.
Display: (2) A/B Position LEDs
Controls: (1) Pushbutton, Remote RS-232 serial port, DB9
Connectors:
(3) A, B, and COMMON, DB15 (F)
(1) Remote, DB9 (F) on rear panel.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=250

Model 8408 PS/2 Keyboard,
VGA Monitor & PS/2 Mouse A/B Manual Data Network Switch

The Model 8408 PS/2 KVM manual data network switch is designed to last!

Features:
Model 8408 PS/2 Keyboard, Monitor and Mouse AB Switch is designed to allow access from one PS/2 computer to 2 locations having a keyboard, monitor, and mouse.
Alternately, the M8408 can also be used where two PS/2 computers need to be shared among one keyboard, monitor and mouse location.
A front panel selector allows easy switching.
No external power required with the Model 8408 Manual Data Network Switch.
Specifications:

Interface:
HD15 (F) connectors (VGA Monitor Interface)
6-Pin MiniDIN (F) connectors (Keyboard Interface)
6-Pin MiniDIN (F) connectors (PS/2 Mouse).
High quality sealed switch with self-wiping contacts.
Attractive and rugged aluminum case provides shielding
Dimensions: 5.25" W x 2" H x 7.25" D.
Cables are also available:

Cable 880841-XXX feet = VGA Monitor Cable, HD-15 (M/M)
Cable 891022-XXX feet = VGA Extension Cable, HD-15 (M/F)
Cable 880835-XXX feet = PS/2 Keyboard/Mouse/Extension Cable, Mini DIN-6 (M/M)
Cable 891021-XXX feet = PS/2 Keyboard/Mouse/Extension Cable, Mini DIN-6 (M/F)

Custom Network Switches are available. Contact us by phone, email, or complete the Online Custom Products Form. http://www.electrostandards.com/Products-Custom/Copper-Switch/

Electro Standards can supply all of your Network Cable requirements. Click here to reach our CABLES, COPPER NETWORK Webpage.

All data switches, data communication products, and data acquisition products are subject to a one year warranty against manufacturing defects. The limit of ESL liability is limited to the cost of the ESL product provided.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=19

Model 7343 CAT5 RJ45 A/B Switch with Remote Control Via Contact Closure provides CAT5 performance.

PathWay® Remotely Controllable Network Switch
Model 7343 CAT5e RJ45 A/B Switch
with Remote Control Via Contact Closure

Provides CAT 5e Performance!
The PathWay® Model 7343 is a CAT5e, RJ45 Interface A/B switch. It provides Category 5e performance. Each of the A, B, and COMMON ports are RJ45. The M7343 data network switch connects a workstation or device between two other devices or networks. The internal circuitry insures isolation between the A and B devices / networks. A front panel button changes the switch position eliminating the need to plug and unplug patchords, thus minimizing connector wear. Switch position status is displayed on front panel LEDs.

SWITCH CONTROL: The switch position may be controlled manually from front panel pushbutton control or remotely from the DB9/Female connector located on the rear of the unit.
Local Switching is achieved by simply pressing the front panel pushbutton and the switch will change to the newly selected position as indicated by the front panel LED's.
Remote Switching of the unit is accomplished through contact closure across pins 4 & 5 of the DB9/female Remote port on the rear panel. A transition to open contacts across pins 4 & 5 of the DB9 connector causes the Model 7343 to switch to the "A" position; a transition to contact closure across pins 4 & 5 of the DB9 connector causes the Model 7343 to switch to the "B" position. Upon initial power to the unit, the unit will read the remote port to determine power up position state. If there are no connections to the Remote port connector, pins 4 & 5 are open, thus the unit will default to the "A" position.

Features:
Great solution for fallback applications.
Interface meets Category 5e performance (10/100 networks).
Local switch position control via pushbutton on front panel, or remote control
via contact closure.
RJ45 ports are transparent to all data.
(3) RJ45 connectors A/B/COM, all 8 signals switched.
Switch maintains connection during power loss.
LED indicators display switch position and power status.
REMOTE port DB9 female.
EMC: Rugged aluminum case provides EMI/RFI shielding.
Expected life, minimum operations, 108
Switch time approximate 3.5 msec.
Custom length data cables are available.
Electro Standards can design Cat 5e switches
to meet your specific requirements.
Specifications:

Port Connectors: (3) RJ45 (F) ports A, B, and COMMON.
Compliance: Interface meets or exceeds Category 5e performance.
Front Panel Controls: (1) Pushbutton to select port A or B.
Display: (2) Red LEDs display switch position and indicate power status.
Supervisory Remote Port: (1) DB9/female dry contact closure.
Power: UL approved 115 VAC / 60Hz, wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: Rackmount Configuration, 19.0" W x 1.75" H x 8.0" D.
Weight: Approximately 4.5 lbs.
Option: Wide Range Power Supply: (Cat. No. 517277) CE and UL listed table mount power module. 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=239

Model 9740/40 Manual High Density 40-Channel
RJ-45 A/B Network Switch System, 100Base-T, Cat 5 Switch

Add quick and easy manual backup switching capability to your data network by utilizing this high-density switch system.

High Quality Manual Data Network Switches Increase the Reliability of Your Network!

Features:
Model 9740/40 Manual CAT5 AB network switch system comes with a Lifetime Warranty
Connectors: RJ45 jacks
A, B and Common connectors on rear panel
Two-position rotary switch on front panel
All 8 pins are switched. Allows compatibility with all RJ-45 interfaces
Manually operated, no power required.
Rackmount configuration is standard
Copper network switch
Dimensions: 19.0" W x 8.75" H x 13.0" D
This high-density manual data network switch system is available with 8, 16, 24, 32, or 40 channels. See Spec.
This high-density manual data network switch system is available as 1000Base-T, Cat 5e also. See Spec.
Electro Standards can design CAT 5 switches to meet your specific requirements.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=198

Model 9740/8 High Density 8 channel AB switch.
Model 9740/8 High Density 8-Channel RJ45 A/B Switch, 100BASE-T, CAT5, ESL catalog Number 305744.
Add quick and easy manual backup network switching capability
to your data network by utilizing this high density switch system.
High Quality Manual Data Network Switches Increase
the Reliability of Your Network!

Features:
M9740/8 CAT5 AB manual data network switch comes with a Lifetime Warranty
Connectors: RJ45 jacks
A, B and Common connectors on rear panel
Two-position rotary switch on network switch front panel
All 8 pins are switched. Allows compatibility with all RJ-45 interfaces
Manually operated, no power required.
Rackmount configuration is standard
Dimensions: 19.0" W x 8.75" H x 13.0" D
This high-density manual data network switch system is available with 8, 16, 24, 32, or 40 channels. See Spec.
This high-density manual data switch system is available as 1000Base-T, Cat 5e also. See Spec.
Electro Standards can design CAT 5 switches to meet your specific requirements.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=194

Model 9740/16 High Density 16-Channel RJ45 A/B Switch, 100BASE-T, CAT5, ESL catalog Number 305745
Add quick and easy manual backup network switching capability
to your data network by utilizing this high density switch system.
High Quality Manual Data Network Switches Increase
the Reliability of Your Network!

Features:
Model 9740 CAT 5 AB manual data network switch comes with a Lifetime Warranty
Connectors: RJ45 jacks
A, B and Common connectors on rear panel
Two-position rotary switch on front panel
All 8 pins are switched. Allows compatibility with all RJ-45 interfaces
Manually operated, no power required.
Rackmount configuration is standard
Copper data network switch
Dimensions: 19.0" W x 8.75" H x 13.0" D
This manual data network switch system is available with 8, 16, 24, 32, or 40 channels. See Spec.
This manual data network switch system is available as 1000Base-T, Cat 5e also. See Spec.
Electro Standards can design CAT 5 switches to meet your specific requirements.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=195

Model 9740/24 High Density 24-Channel RJ45 A/B Switch, 100BASE-T, CAT5, ESL catalog Number 305746.
Add quick and easy manual backup switching capability to your
data network by utilizing this high-density switch system.
High Quality Manual Data Network Switches Increase
the Reliability of Your Network!

Features:
Model 9740/24 CAT 5 AB manual network switch comes with a Lifetime Warranty
Connectors: RJ45 jacks
A, B and Common connectors on rear panel
Two-position rotary switch on front panel
All 8 pins are switched. Allows compatibility with all RJ-45 interfaces
Manual data network switch, no power required.
Rackmount configuration is standard
Copper network switch
Dimensions: 19.0" W x 8.75" H x 13.0" D
This high-density manual data network switch system is available with 8, 16, 24, 32, or 40 channels. See Spec.
This high-density manual data network switch system is available as 1000Base-T, Cat 5e also. See Spec.
Electro Standards can design CAT 5 switches to meet your specific requirements.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=196

Model 9740/32 High Density 32-Channel RJ45 A/B Switch, 100BASE-T, CAT5, ESL catalog Number 305747.
Add quick and easy manual backup switching capability to
your data network by utilizing this high density switch system.
High Quality Manual Data Network Switches Increase the
Reliability of Your Network!
Features:

Model 9740 CAT5 AB manual network switch comes with a Lifetime Warranty
Connectors: RJ45 jacks
A, B and Common connectors on rear panel
Two-position rotary switch on front panel
All 8 pins are switched. Allows compatibility with all RJ-45 interfaces
Manual data network switch system, no power required.
Rackmount configuration is standard
Copper network switch
Dimensions: 19.0" W x 8.75" H x 13.0" D
This high-density manual data network switch system is available with 8, 16, 24, 32, or 40 channels. See Spec.
This high-density manual data network switch system is available as 1000Base-T, Cat 5e also. See Spec.
Electro Standards can design CAT 5 switches to meet your specific requirements.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=197

Model 9741/8 High Density 8-Channel RJ45 A/B Switch, 100BASE-T, CAT5e, ESL catalog Number305741.

Model 9741 accomodates up to 8 channels in only 8.75 inches of panel height. Features RJ-45 jacks. A, B and COMMON connectors are on the rear panel. All 8 pins are switched allowing compatibility with all RJ-45 interfaces. This is a manually operated switch, no power is required. The rackmount configuration is standard. The dimensions are 19.0" W x 8.75" H, 13.0" D. The Model 9741is available in 8, 16, 24, 32 and 40 channel versions.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=199

Model 9741/16 High Density 16-Channel RJ45 A/B Switch, 100BASE-T, CAT5e, ESL catalog Number305742.

Model 9741 accomodates up to 16 channels in only 8.75 inches of panel height. Features RJ-45 jacks. A, B and COMMON connectors are on the rear panel. All 8 pins are switched allowing compatibility with all RJ-45 interfaces. This is a manually operated switch, no power is required. The rackmount configuration is standard. The dimensions are 19.0" W x 8.75" H, 13.0" D. The Model 9741 is available in 8, 16, 24, 32 and 40 channel versions.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=200

Model 9741/24 High Density 24-Channel RJ45 A/B Switch, 100BASE-T, CAT5e, ESL catalog Number 305743.

Model 9741 accomodates up to 24 channels in only 8.75 inches of panel height. Features RJ-45 jacks. A, B and COMMON connectors are on the rear panel. All 8 pins are switched allowing compatibility with all RJ-45 interfaces. This is a manually operated switch, no power is required. The rackmount configuration is standard. The dimensions are 19.0" W x 8.75" H, 13.0" D. The Model 9741 is available in 8, 16, 24, 32 and 40 channel versions.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=201

Model 9741/32 High Density 32-Channel RJ45 A/B Switch, 100BASE-T, CAT5e, ESL catalog Number 305786.

Model 9741 accomodates up to 8 channels in only 8.75 inches of panel height. Features RJ-45 jacks. A, B and COMMON connectors are on the rear panel. All 8 pins are switched allowing compatibility with all RJ-45 interfaces. This is a manually operated switch, no power is required. The rackmount configuration is standard. The dimensions are 19.0" W x 8.75" H, 13.0" D. The Model 9741 is available in 8, 16, 24, 32 and 40 channel versions.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=202

Model 9741/40 High Density 40-Channel RJ45 A/B Switch, 100BASE-T, CAT5e, ESL catalog Number 305788.

Model 9741 accomodates up to 40 channels in only 8.75 inches of panel height. Features RJ-45 jacks. A, B and COMMON connectors are on the rear panel. All 8 pins are switched allowing compatibility with all RJ-45 interfaces. This is a manually operated switch, no power is required. The rackmount configuration is standard. The dimensions are 19.0" W x 8.75" H, 13.0" D. The Model 9741 is available in 8, 16, 24, 32 and 40 channel versions.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=203

Model 9454 RJ45 Cat 5e Compliant
3-Channel A/B Manual Data Network Switch, Rackmount

The Model 9454 manual AB data network switch enables access to two 100 BASE-T CAT 5e networks. Each of the three channels of the Model 9454 manual switch enables the user to reroute data between two networks with a simple turn of a knob.This 3-Channel A/B manual switch supports all 8 pins of the RJ45 CAT5e interface.

High Quality Manual Data Network Switches Increase the Reliability of Your Network!

Features:
M9454 CAT5e switch affords efficient use of panel space:
3 complete AB switches in 1U panel height (1.75")
Individual Channel Control
M9454 Network Switch is tested for Cat 5e compliance
Manually control each channel separately via three front-panel knobs,
one knob per channel
Each channel consists of one A, B and COMMON port
All (9) RJ45 Female ports are located on the rear panel:
(3) Common, (3) A Ports and (3) B Ports
Each channel switches (8) RJ45 leads
Aluminum case provides EMI/RFI shielding
Switching mechanism is sealed precious metal contact switch
Manually operated. No power required
Custom length patchcords are available
Specifications:

CONNECTORS: (9) RJ45 (F) category 5e ports on the rear panel;
(3) Common, (3) A ports, (3) B ports.
CONTROLS: (3) Rotary switches select A or B.
PINS SWITCHED: All 8.
ENCLOSURE: Shielded Aluminum.
DIMENSIONS: 19" W x 1.75" H x 8" D.
WEIGHT: 2 lbs.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=133

Model 9448 RJ45 A/B switch, Manual, Cat5e Compliant, Rackmount.
The Model 9448 manual data network switch enables access to two 10/100/1000 Base-T networks. The Model 9448 Category 5e A/B switch allows the user to reroute data between two networks with a simple flip of a switch. This manual network switch supports all 8 pins of the RJ45 CAT5e interface. No need to plug and unplug cables thereby eliminating connector wear.

High Quality Manual Data Network Switches Increase the Reliability of Your Network!

Features:
Model 9448 CAT5e AB data network switch allows access to two networks from one computer or workstation.
Certified for Cat5e compliance. Rated for 10/100/1000 Base-T networks.
All 8 pins of the RJ45 interface are switched.
Transparent to data speed and format.
Manual operation via front-panel rotary switch.
High quality sealed switch with self-wiping precious metal contacts.
Eliminates the need to plug and unplug cables.
No external power required.
Rackmount configuration.
Attractive anodized black box packaging provides EMI/RFI shielding.
Lifetime guarantee.
Custom length Cat5e cables available for your switch installation.
Municipalities, schools, government: On GSA Schedule!
Specifications:

PORT CONNECTORS: (3) RJ45 female CAT5e ports on rear panel
labeled A, B, and COMMON.
FRONT PANEL CONTROL: (1) Manual Rotary Switch selects A or B
PINS SWITCHED: All 8 pins switched
POWER: No power required. Manually operated.
ENCLOSURE: Shielded Aluminum enclosure.
DIMENSIONS: 19" W x 1.75" H x 8" D (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 1.0 lb. (0.5 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=171

Model 9263 Dual Channel RJ45 CAT5e A/B Network Switch,
Manual, Simultaneous Switching, Side Mount

The Model 9263 dual-channel RJ45 A/B manual switch switches both channels simultaneously. Each of the two channels reroutes data from its COMMON port to its A or B port, depending on the switch position. The manual rotary selector switch and all 6 of the dual channel ports are located on the front panel. Mounting ears are available (Cat. No. 517739, set of two).

High Quality Manual Data Network Switches Increase the Reliability of Your Network!

Features:
M9263 CAT5e AB switch is a dual-channel RJ45 A/B manual network switch.
Both channels switch to A or B simultaneously.
Each of the 2 channels reroutes data from its COMMON port to its A or B port, depending on switch position.
Mounting ears are available (Cat. # 517739, set of two).
Rated for 10/100/1000 networks (Up to CAT 5e).
Transparent to data format.
Switches all 8 leads.
All (6) RJ45 female ports located on front panel: (2) A ports, (2) B ports, and (2) COMMON ports.
High quality sealed switch with self-wiping contacts.
Eliminates need to plug and unplug cables.
No external power required.
Rugged aluminum case provides EMI/RFI shielding.
Specifications:

Connectors: (6) RJ45 female, an A, B, and COMMON for each of the two channels.
Controls: (1) Manual Rotary selector switch.
Mounting: Designed to mount vertical by adding mounting ear brackets (not included)
Dimensions: 8.37" H x 3.5" (2U) W x 6" D. (less ears)
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=270

Model 9066 Eight Channel
RJ45 (2 Pair) 10 Base-T A/B Data Network Switch

RoHS Compliant!

Each channel enables access to two 10 BASE-T networks. The Model 9066 A/B switch allows the user to reroute data between two networks with a simple push of a button. The pushbutton face changes color to indicate A or B switch status. The unit supports 4 pins of the RJ45 interface. No need to plug and unplug cables thereby eliminating connector wear.

Features:
M9066 AB Switch - Each channel allows access to two networks from one computer or workstation
Manual operation via front-panel pushbuttons
No power required for the Model 9066 Network Switch.
Transparent to data format
Standard & custom RJ45 cables are available from Electro Standards
Specifications:

Connectors: (24) RJ45 ports on rear panel.
Controls: (8) Pushbutton switches on front panel select A or B.
Pins Switched: 4 Pins Switched. (2 pair: 1 & 2, 3 & 6).
Enclosure: Shielded Aluminum.
RoHs compliant
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=132

Model 9061 RJ45
(2 Pair) 10 Base-T Manual A/B Data Network Switch, Module

Each Model 9061 manual data network switch module enables access to two 10 BASE-T networks. The Model 9061 A/B switch allows the user to reroute data between two networks with a simple push of a button. The pushbutton face changes color to indicate A or B switch status. This Model 9061 data switch supports 4 pins of the RJ45 Interface. No need to plug and unplug cables thereby eliminating connector wear.

Features:
Model 9061 AB Switch allows access to two networks from one computer or workstation
Manual operation from Front Panel pushbutton
No power required
Transparent to data format
Eight Model 9061 manual data network switch modules can mount in a Model 9025, Catalog No. 305972 Equipment Rack
Specifications:

Connectors: (3) RJ45 ports on rear panel.
Controls: (1) Pushbutton Switch on front panel selects A or B.
Pins Switched: 4 Pins Switched (2 pair: 1 & 2, 3 & 6)
Enclosure: shielded aluminum
Dimensions: 2.0" W x 8.0" D x 5.25" H
Weight: 1 lb.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=130

The Model 9047 allows the user to access two DB9 devices connected to the A and B ports from one DB9 device connected to the COMMON port. Switching between devices A and B is quick and easy via the front panel rotary selector.

Features:
Allows quick connection to any one of two DB9 devices
from one COMMON device.
All 9 pins of the DB9 interface are switched.
Manual operation via front-panel rotary switch.
High quality sealed switch with self-wiping low impedance contacts.
Transparent to data speed and format.
No external power supply required.
Attractive anodized aluminum packaging provides EMI/RFI shielding.
Slides into Model 9025 Module Rack or attaches to surface-mounted
Vertical Mounting Plate Model 9417 (Cat.No. 500417).
(See Related Products tab or Accessories tab)
Model 9047 Manual AB Network Switch connectors are all female (FFF)
See Model 9247, Catalog No. 305247, for all male connectors (MMM)
(See Related Products tab)
Other connector combinations are available
Lifetime guarantee against manufacturing defects.
Municipalities, schools, government:
The Model 9047 is on GSA Schedule GS-35F-0286V!

Specifications
PORT CONNECTORS: (3) DB9 female connectors labeled A, B, and COMMON.
FRONT PANEL CONTROL: (1) Rotary switch on front panel selects A or B.
POWER: No power required. Manually Operated.
DIMENSIONS: Module 2.0" W x 5.0" H x 8.0" D (5.1 x 12.7 x 20.3 cm).
WEIGHT: Approximately 0.5 lb. (0.3 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=138

High Quality Manual Data Switches Increase the Reliability of Your Network!

The Model 8050 CAT5 Manual Data Network Switch enables access to two 10/100 BASE-T networks (Up to 100 Mbps). The Model 8050 Category 5 A/B switch allows the user to reroute data between two networks with a simple turn of a knob. Model 8050 supports all 8 pins of the RJ45 CAT5 interface. No need to plug and unplug cables thereby eliminating connector wear.

Features:
Model 8050 CAT5 AB manual data network switch allows access to
two networks from one computer or workstation.
Rated for 10/100 Base-T networks (up to Cat5).
High quality sealed switch with self-wiping low impedance contacts.
Transparent to data speed and format.
All 8 pins of the RJ45 interface are switched.
Eliminates the need to plug and unplug cables.
Manual data network switch requires no external power required.
Attractive anodized black box packaging provides EMI/RFI shielding.
Improves computer network efficiency by allowing sharing of peripherals.
Custom length RJ45 Cat 5 cables available for your switch installation.
Lifetime guarantee against manufacturing defects.
Municipalities, schools government: This product is on GSA Schedule!

SPECIFICATIONS:
PORT CONNECTORS: (3) RJ45, Cat 5 female connectors labeled
A, B, and COMMON.
FRONT PANEL CONTROL: (1) Rotary Switch on front panel selects A or B.
PINS SWITCHED: All 8 Pins Switched
POWER: No power required. Manually Operated.
DIMENSIONS: 5.3" W x 7.3" D x 2.6" H.
(13.5 x 6.6 x 18.5 cm).
WEIGHT: Approximately 1.0 lb. (0.5 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=128

Model 8039 Multi-Peripheral (RJ45 Cat 5 & XLR 3-pin) A/B Switch, Manual, Desktop

Switches data & audio channels to either of two remote locations.

The Model 8039 allows quick and easy connection of PC data and microphone audio channels to either of two remote locations. The data channel utilizes RJ45 Cat 5 connectors and cabling. The audio channel utilizes XLR 3-pin microphone connectors and cabling.

The Model 8039 A/B Switch allows the user to reroute data and audio to location A or location B via a front panel rotary selector switch. All eight pins of the RJ45 connector are switched, simultaneously. No need to plug and unplug cables, eliminating connector wear.

Allows data and audio audio access from one computer and audio system to either of two locations.
Manual operation via front panel rotary switch.
Eliminates the need to plug and unplug cables.
All 8 pins of the RJ45 data interface and 3 pins of the audio interface are switched simultaneously.
No power required.
Transparent to data speed and format.
Attractive aluminum case provides EMI/RFI shielding.
Dimensions: 3.0" H x 8.0" W x 8.0" D
Approximate weight: 1.5 lbs
Custom length RJ45 (m/m) patchcords are available upon request.
Custom length XLR 3-Pin audio cables are available upon request.

Specifications:
CONNECTORS: (3) RJ45 (F) connectors A, B, and COM on rear panel. (3) XLR 3-pin (F) connector A, B, and COM on rear panel.
CONTROLS: (1) Two position (A & B) rotary switch on front panel.
PINS SWITCHED: All eight RJ45 pins and three XLR 3-pin pins are switched.
POWER: None required.
DIMENSIONS: 3.0" H x 8.0" W x 8.0" D.
WEIGHT: Approximately 1.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=18

Model 8100 DB-9 Interface Manual A/B Data Network Switch

High Quality Manual Data Network Switches Increase the Reliability of Your Network!

Features:
Model 8100 Manual AB Network Switch allows two devices to share one port
Transparent to data speed and code
Switches all 9 signals of the DB9 interface
Rugged brushed aluminum case provides shielding
High quality sealed switch with self-wiping contacts
Operating temperature range -17° Celsius to 75° Celsius
Optional mounting ears adapt unit for panel mounting.
Manual data network switch, no external power required.
Custom Network Switches are available. Contact us by phone, email, or complete the Online Custom Products Form. http://www.electrostandards.com/Products-Custom/Copper-Switch/

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=135

The Model 8080 manual data network switch enables access to three 10/100/1000 Base-T networks up to CAT5e. The Model 8080 Category 5e A/B/C Data Switch allows the user to manually reroute data between three networks with the turn of a knob. This switch supports all 8 pins of the RJ45 CAT5e interface. No need to plug and unplug cables thereby eliminating connector wear.

High Quality Manual Data Network Switches Increase the Reliability of Your Network!

Features:
Model 8080 CAT5e 3-position network switch allows access
to three networks from one computer or workstation.
Certified for Cat5e compliance.
High quality sealed switch with self-wiping contacts.
Eliminates the need to plug and unplug cables.
No external power required.
Transparent to data format.
Manual control via knob located on front panel.
Rated for 10/100/1000 networks (Up to CAT 5e)
Copper network switch with attractive anodized black box
packaging provides EMI/RFI shielding.
All 8 pins of the RJ45 interface are switched.
Lifetime guarantee.
Custom length Cat5e cables available for your switch installation.
Municipaliltes, schools, government: This product is on GSA Schedule!
(GS-35F-0286V) Click here or on GSA icon for details.
Specifications:
PORT CONNECTORS: (4) RJ45 female connectors labeled A, B, C, and COMMON.
FRONT PANEL CONTROL: (1) Rotary Switch on front panel selects A, B, C
POWER: No power required. Manually operated.
DIMENSIONS: 5.3" W x 2.6" H x 7.3" D (13.5 x 6.6 x 18.5 cm).
WEIGHT: Approximately 1.0 lb (0.5Kg).

Features:
Model 8080 CAT5e 3-position network switch allows access
to three networks from one computer or workstation.
Certified for Cat5e compliance.
High quality sealed switch with self-wiping contacts.
Eliminates the need to plug and unplug cables.
No external power required.
Transparent to data format.
Manual control via knob located on front panel.
Rated for 10/100/1000 networks (Up to CAT 5e)
Copper network switch with attractive anodized black box
packaging provides EMI/RFI shielding.
All 8 pins of the RJ45 interface are switched.
Lifetime guarantee.
Custom length Cat5e cables available for your switch installation.
Municipaliltes, schools, government: This product is on GSA Schedule!
(GS-35F-0286V) Click here or on GSA icon for details.
Specifications:
PORT CONNECTORS: (4) RJ45 female connectors labeled A, B, C, and COMMON.
FRONT PANEL CONTROL: (1) Rotary Switch on front panel selects A, B, C
POWER: No power required. Manually operated.
DIMENSIONS: 5.3" W x 2.6" H x 7.3" D (13.5 x 6.6 x 18.5 cm).
WEIGHT: Approximately 1.0 lb (0.5Kg).

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=265

Model 8079 RJ45 A/B Data Network Switch,
Manual, CAT 5e Compliant

The Model 8079 CAT 5e Manual Data Network Switch enables access to two 100 BASE-T networks. The Model 8079 Category 5e A/B Switch allows the user to manually reroute data between two networks with a turn of a knob. This manual network switch supports all 8 pins of the RJ45 CAT5e interface.

High Quality Manual Data Network Switches Increase the Reliability of Your Network!

Features:
CAT5e AB Data Switch allows access to two networks from one computer or workstation
Certified for category 5e compliance
Copper data network switch
High Quality sealed switch with self-wiping contacts
Eliminates the need to plug and unplug cables
No external power required
Transparent to data format
Rated for 10/100/1000 networks (Up to Cat 5e)
Switching mechanism is sealed precious metal contact switch
Electro Standards can design CAT 5e manual switches to meet your specific requirements.

Specifications:
Connectors: (3) RJ45, CAT 5e ports on rear panels
Controls: (1) Manual Rotary Switch on front panel selects A or B.
Pins Switched: All 8 Pins Switched.
Enclosure: Shielded Aluminum
Dimensions: 5.3" W x 7.3" D x 2.6" H.
Weight: 1 lb.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=129

Model 7432 HSSI Single Port Normal/Loopback Switch with RTS Remote
Micro-D 50-pin connector interface.
Loops (RT, RD, TA) to (TT, SD, CA) respectively.
Front panel pushbutton control selects between 'Normal' and Loop 'Back' position.
LED's indicate switch position and power status.
Switch position and connection through the switch maintained during power loss.
RS232 interface, DB9/female connector on rear panel allows remote control of the unit based on RTS presence/absence.
Remote control allows the user to chance switch position.
Desktop Case Size: 8" Wide x 2" High x 7.25" Deep

The Model 7432 Normal Loppback Switch is designed to Loopback key signals within a single HSSI port interface based on the presence or absence of the RTS signal on the DB9 port "REMOTE" (Automatic Mode), or based on the user depressing the front panel pushbutton switch. The HSSI interface is a 50-pin micro-D type connector. If the operator overrides the Automatic Mode, the user can alternate bewtween Normal and Loopback positions regardless of the RTS signal on the DB9 port.

Specifications
Connector: (1) HSSI on rear panel
Remote: (1) DB9 Female on the rear panel
Controls: (1) Pushbutton on the front panel selects Normal or Loopback position. 2 LED's on the front panel
Dimensions: 8"W x 2"H x 7.25"D

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=259

Model 7407 RJ45 A/B Switch
with Remote Port

Half the size of standard 1U rack!

The PathWay® Model 7407 RJ45 A/B Network Switch with Remote control access allows the user to access two separate RJ45 ports via the COMMON port.

Control the Model 7407 network switch manually via a front panel pushbutton or remotely from an RS-232 rear-panel serial port. Switch status may be attained via front-panel LED display or the remote RS-232 serial port.

Features:
Model 7407 RJ45 AB Network Switch with Remote control accesses two separate RJ45 ports via the COMMON port.
Ideal for sharing or fallback applications.
All 8 pins of the RJ45 interface are switched.
Transparent to data speed and protocol.
All switched signals are passed via copper contact relays that maintain their position and continuity in the event of power failure.
Pushbutton control or remote ASCII command access through the Remote serial port.
Front panel LEDs indicate switch position and power status.
Rugged aluminum case provides EMI/RFI shielding.
Specifications:

Connectors:
(3) RJ45 (F) for A, B and COMMON.
(1) RJ45 (F) REMOTE port.
(1) Power jack.
Controls: (1) Manual pushbutton on front panel, or via remote RJ45 (F) serial port.
Display: (2) LEDs on front panel display switch position and power status.
Power: UL approved 115 VAC, 60 Hz wall mount power module.
Dimensions: 8" W x 1.75" H x 8" D.
Weight: Approximately 2.5 lbs.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=242

The Model 7406 RJ45 A/B Switch, with Remote allows the user the capability of accessing two seperate RJ45 ports via the common port. The switch may be controlled manually via a front panel push button or remotely from an RS-232 serial port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the remote RS-232 serial port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the remote RS-232 serial port located on the rear of the unit.

Switch Control - The switch position may be controlled manually from a front panel push button located on the front of the unit, or remotely from a remote RS-232 serial port located on the rear of the unit. To switch manually simply press the front panel panel push button and the switch will change to the new selected position as indicated by the front panel LED's. Remote switching of the unit is done through an RS-232 (RJ45) serial port located on the rear of the Model 7406, which may be connected to any standard RS-232 port on a computer.

Once the computer is connected to the remote port, any common terminal emulation software (i.e. WINDOWS Hyperterminal software) may be used to interface with the M7406. Simply configure the terminal software for VT100 or compatible mode, choose the correct COM port of the computer, and set the data format as listed: Baud rate: 9600, Data bits: 8, Stop bits: 1, Parity: None.

Features:
- Manual switch control via front panel pushbutton.
- All eight signals of the RJ45 interface are switched.
- Remote switch control via RS232 REMOTE port on rear panel.
- The switched RJ45 ports are transparent to data format.
- Front panel LED's display switch position and power presence.
- Switch retains current position even in the event of a power failure.
- Slim 1U high rackmount configuration.

Specifications:
PORT CONNECTORS: (3) RJ45 connectors on rear panel for ports A, B, and COMMON.
DIMENSIONS: 1.75" H x 19.0" W x 8.0" D.
WEIGHT: Approximately 4.5 lbs.
POWER: UL approved wall mount power module plugs into 120 VAC/60Hz and supplies switch with 12 VAC, 500 mA.
DISPLAY: (2) LED's on front panel indicate switch position.
LOCAL CONTROL: (1) Pushbutton on front panel for local switch control.
REMOTE: (1) RJ45 connector on rear panel allows remote switch control via serial data.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=241

Model 7008 RJ45 CAT5 A/B/Off-Line Data Switch Modules
with Contact Closure Remote Control Port

100 Base-T, CAT 5 Compliant, Modular Expandable System!

Each PathWay® Model 7008 A/B/OFF-LINE CAT 5 Switch Module allows the user to connect a single RJ45 interfaced device to be connected to either of two RJ45 interfaced devices, or to be isolated from both of them by being switched to an OFF-Line position. Up to eight of the switch modules may be slid into the Model 9030 Rack which also supplies necessary power. The Model 9030 Rack has dimensions of 19" W x 5.25" H x 7" D.

The Model 7008 RJ45 A/B/OFF-LINE switch can be controlled locally by pushbutton or remotely by contact closure. A pushbutton on the front panel allows the user to locally control the switch position. A contact control remote port facilitates remote switching. When the proper contacts are made on the remote port, the unit will switch to the prescribed port, either A, B, or OFF-LINE. In either local or remote mode of operation, LED indicators display the switch position and power status.

Features:
Ports A, B and COMMON are RJ45 connectors.
Supports 100 BASE-T applications.
Aluminum Enclosure reduces RMI/RFI.
Module size: 2" W x 5" H x 7" D.
The switch ports are transparent to all data.
All eight (8) pins of the RJ45 interface are switched.
All switched signals are passed via copper contact relays that maintain their position and continuity even in the event of a power loss or failure.
Front panel pushbutton control or remote contact control via contact closure signals to remote port.
Front panel LEDs display the current switch position and flash while the user is in the process of changing the switch position.
The Model 7008 is a modular, rackmount switch and is sold in conjunction with the Model 9030 rack, Catalog No. 305945.
The Model 9030 rack can accommodate up to eight Model 7008 switch modules.
The Model 9030 Rack includes a power supply module, which is responsible for powering all the switches in the rack. A power bus cable (included) distributes the power among the modules.
Electro Standards can design CAT 5 switches to meet your specific requirements.
Specifications:

Module size: 2" W x 5" H x 7" D.
Power: Requires 12 VAC, .5A.
Display: (2) Port Status Tri-State LED's on front panel.
Controls: (1) Pushbutton on front panel selects A, B, or OFF-LINE.
Connectors: (4) RJ45 (F) on rear panel.
Leads Supported: All 8 pins switched.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=233

Path Way® Remotely Controllable Network Switch
Model 7354 RJ45 A/B/C/D/E/F Switch
with 10 BASE-T LAN TELNET Access.

The PathWay® Model 7354 RJ45 A/B/C/D/E/F Network Switch with 10 BASE-T LAN Telnet Access provides 6-way switching in a low profilerackmount unit. The Model 7354 network switch allows the user the capability of sharing a single RJ45 interface device connected to the COMMON port among six other devices connected to the A, B, C, D, E, F ports with
local and remote access functionality.

Remote access can be accomplished using an Ethernet 10-Base-T connection and Telnet commands. Proper authentication is required for remote access via the 10-BASE-T connection. User can monitor status and control switch functions.

Features:
Share one RJ45 port among six RJ45 ports.
All eight pins of each RJ45 port are supported.
The switch ports are transparent to all data.
Switch locally from front panel pushbutton or remotely via
Ethernet port located on the rear panel.
Remote port is 10/100 RJ45 Ethernet port. Communication
with switch is via TELNET session. User setup allows
assignment of IP address for switch unit.
Remotely select switch position, query switch position,
lockout front panel pushbutton control.
LED displays indicate switch position and power status.

Specifications:
CONNECTORS: (7) RJ45 Female connectors labeled A, B, C, D, E, F and COM.
REMOTE PORT: RJ45 jack accepts 10 BASE-T LAN access
Ethernet for Remote Control.
POWER: UL approved 120 VAC, 60 Hz, wall mount power module supplies
12 VDC, 500 mA. (Included with the unit).
DISPLAY: (6) LED's indicate switch position, status, and power.
CONTROL: (1) Pushbutton control for local switching.
DIMENSIONS: rackmount, 19" W x 1.75" H x 8" D.
WEIGHT: Approx. 4.5 lbs. (2 Kg).

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=266

Model 7349 Dual-Channel CAT5e RJ45 A/B/OFFLINE Switch
with 10 BASE-T LAN Access and Scheduled Switching

The PathWay® Model 7349 Dual-Channel CAT 5e RJ45 A/B/OFFLINE network switch with 10 BASE-T LAN Access, provides a powerful tool to manage switching requirements. Each of the two channels allows the user the capability of sharing a single port RJ45 interface device connected to the COMMON port among two other devices connected to the A and B ports with local and remote access functionality. Remote access can be accomplished by a 10 BASE-T/100 BASE-Tx connection.

Proper authentication is required for remote access via the 10 Base-T/100 Base-Tx connection. Depending on assigned user privileges, users can be assigned rights to monitor status, control switch functions, setup users, schedule future switching and configuring the LAN Access port.

Features:
Each of the two channels allows the capability of sharing a single port RJ45 interface device connected to the COMMON port among two other devices connected to the A and B ports with local and remote access functionality.
Switch ports are transparent to data.
Channels are switched individually.
All (8) pins of the RJ45 interface are switched.
All switched signals are passed via copper contact relays that maintain their position and continuity even in event of power loss.
Remote control of the channel position from a 10 BASE-T / 100 BASE-TX
LAN Ethernet environment or alternately, the front panel pushbutton.
Remote control allows the user to schedule unit to change position at
a given date and time.
Remote control allows the user to schedule unit to lock/unlock front
panel control at a given date and time.

Software Features:
Access User Interface via standard Web browser.
Login password authentication required.
Easy to use, simple point and click operation.
Remotely access to control or monitor the Model 7349 Switch System.
Four different access levels of users.
User administration available to the highest level user.
Lockout front panel manual access.
LAN access gives users across the LAN or over the Internet access to control if user network is configured accordingly.
Ability to schedule switching activity and lockout of manual access.
Specifications:

Connectors:
(6) RJ45 (F) Connectors for A, B and COMMON of channels 1 and 2.
(1) RJ45 (F) Remote Connector.
Control: (2) Pushbuttons
Display: (4) LEDs on front panel indicate switch position and lockout status.
Power: UL Approved 115 VAC / 60 Hz wall mount power module is supplied with unit.
Dimensions: 19" W x 1.75" H x 8" D.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=240

Model 7342 RJ45 A/B CAT 5e Switch / Rackmount
with 10/100 BASE-T Remote Interface

IP Addressable Data Network Switch, CAT 5e Compliant!

PathWay® Model 7342 RJ45 A/B Switch with 10/100 Base-T LAN Telnet Remote Control and Cat 5e compliance allows the user the capability of sharing a single port RJ45 interface device connected to the COMMON port among two other devices connected to the A and B ports with local and remote control functionality. Remote control can be accomplished using an ethernet 10/100 Base-T connection and Telnet commands.

Proper authentication is required for remote control via the 10/100 Base-T connection. Users can then monitor status, lockout front panel pushbutton control, and control switch position.

Features:
Allows quick connection to any one of two RJ45 devices
from one COMMON device.
Switches all 8 pins of the RJ45 interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Certified for Cat 5e compliance.
Rated for 10/100/1000 Base-T networks.
Local control via front-panel pushbutton.
Remote control port allows off-site monitoring and switch management.
Remote control RJ45 port is IP addressable, 10/100 Base-T.
Remote control of the switch through the Telnet command interface
is password protected.
Front panel LED's display switch position and power status.
Retains last switch position in the event of a power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length Cat 5e cables available for your switch installation.
Municipalities, schools, government: This product is on GSA Schedule!
Specifications:

PORT CONNECTORS: (3) RJ45 female connectors labeled A, B, and COMMON.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) RJ45 female connector on rear panel accepts
10/100 Base-T LAN access Ethernet for Remote Control operation. Password Protected.
POWER: UL approved 120VAC, 60 Hz wall mount power module supplies
12 VDC, 500mA to the unit.
DIMENSIONS: Rackmount 19.0" W x 8.0" D x 1.75" H. (48.3 x 4.4 x 20.3 cm).
WEIGHT: Approximately 4.5 lbs. (2.0 Kg)
Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=238

Path Way® Remotely Controllable Network Switch

Model 7285 DB25 Crossover Switch
with Remote RS232 Control

The PathWay® Model 7285 data network switch is a powerful and versatile tool to manage your network switching requirements!

The Model 7285 DB25 Crossover Switch with Remote Control can be manually controlled via the front panel pushbutton or remotely via the RS-232 remote port.

Features:
The switch ports are transparent to all data.
All pins of the DB25 connectors are switched.
All switched signals are passed via copper contact relays that maintain their position and continuity even in event of a power loss.
Front panel pushbutton control or remote access through the RS232 Serial remote port.
Front panel LEDs display the current switch position: Normal or Crossover
In the Normal Mode, Channel A connects to Channel C, and Channel B connects to Channel D.
In the Crossover position, Channel A connects to Channel D, and Channel B connects to Channel C.
Electro Standards manufactures a wide range of RS-232 network switches.

Specifications:
Connectors:
(4) DB25 connectors, A, B, C & D.
(1) DB9/female, RS232 serial Remote port.
(1) Power jack.
Controls: (1) Front panel pushbutton allows selection of Normal or Crossover.
Display: (2) LEDs indicate position status and power.
Power: UL approved wall mount power module, 115 VAC, 60 Hz.
Dimensions: 1.75" H x 19" W x 8" D.
Weight: 3 lbs.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=225

Path Way® Remotely Controllable Network Switch
Model 7284, 2-Position Multi-Peripheral A/B Sharing Switch,
PS/2 Mouse, PS/2 Keyboard, and USB Combination Interface,
with Remote Control

The PathWay® Model 7284 Multi-Perpherial A/B Sharing Switch with Remote Contact Control provides a powerful tool to manage switching requirements. The Model 7284 network switch switches mouse, keyboard and USB ports simultaneously.

The Model 7284 network switch can be manually controlled via the front panel or remotely controlled via the rear panel screw terminal Remote port. Each channel, A, B, and COMMON, contains a 6-Pin MiniDIN Female PS/2 mouse port, one 6-Pin MiniDIN Female PS/2 Keyboard port, and one USB port.

Features:
M7284 AB network switch switches mouse, keyboard and USB ports simultaneously
Control via front-panel toggle
Control remotely via rear panel screw terminal Remote port
Each channel, A, B, and COMMON contains a 6-Pin MiniDIN Female PS/2 mouse port, one 6-Pin MiniDIN Female PS/2 Keyboard port, and one USB port
Mouse and Keyboard emulation as required; USB connector, all pins switched
LED's display switch position A or B and power status
Connection through the switch, and switch status maintained during power loss to the unit
Unit has mounting holes to mount on right or left side plate
Power from 24 VDC source (not included with unit)
Panel mount power connector 2 position Phoenix (mating connector included)

Specifications:
Switched Connectors on Rear Panel:
(3) 6-Pin MiniDIN (F) Connectors PS/2 Mouse Ports labeled A, B, and COMMON.
(3) 6-Pin MiniDIN (F) PS/2 Keyboard Ports labeled A, B and COMMON.
(3) USB Ports labeled A, B and C (For COMMON).
Controls:
Front Panel: (1) Toggle for A/B Switch Control.
Rear Panel: (1) 4-Position Screw Terminal Strip for Remote Contact Closure.
Display: Front Panel, (2) LEDs (indicate switch position), Labeled A and B.
Power: Rear Panel, (1) 2-Pin input power connector (mating connector included). Accepts 24 VDC to power the unit. A power supply is not included with this unit.
Dimensions: 1.75" H x 8" W x 8" D.
Weight: 2.5 lbs.
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=146

The PathWay® Model 7283 4-Channel A/B Data Network Switch, DB25 Interface with Dual Serial Remote and Power Ports allows the user the capability of sharing a single DB25 interface device connected to the common port among two other devices connected to the A and B ports for four separate channels. The system affords local and remote access functionality. Remote access can be accomplished by RS232 commands sent via the Remote Serial Ports. The users can remotely monitor status and control switch functions.

Features:
The switch ports are transparent to all data.
All channels are switched simultaneously.
All switched signals are passed via copper contact relays
that maintain their position continuity even in event of a power loss.
Connecting the Serial Remote Port 1 of each Model 7283 unit in a multi-drop
format will allow a command sent by the first serial control device to be
heard by all connected Model 7283 units.
Similarly, connecting the Serial Remote Port 2 of each Model 7283 unit a
llows a command sent from the second control device to be received by
all connected Model 7283 units.
Each Model 7283 AB network switch is addressable.
Therefore, each Model 7283 unit can be switched individually or all
connected Model 7283 units can be switched simultaneously.
Remote control commands include: changing switch position, querying
switch position, and lock/unlock front panel pushbutton control.
All A, B, and Common ports on the Model 7283 are DB25 female connectors.
All (25) signal lines of the DB25 RS530 interface connectors are supported.
There are four channels, each containing an A, B, and Common port for a
total of 12 switch ports on the rear panel.
LEDs on the front panel display the switch position (A/B), front panel lockout
status, and power status.
Dual power supply ports allow each of two separate external power supplies to be connected to the unit for redundancy. Internal circuitry will automatically regulate
which supply source powers the unit. If a supply is removed, the supply remaining
will power the unit.
Unit mounts in a standards 2U high, 19-inch wide equipment rack.
Multiple Switches can be cascaded together for simultaneous switching.
See Illustration below!
Model 7283 can be utilized to switch RS-232 interface.
Electro Standards manufactures a wide range of RS-232 switches.
Municipalities, schools, government: This product is on GSA Schedule!
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=224

Model 7282 2-Channel RS530 A/B Switch with DB25 Interface, Dual Serial Remote Control Ports and Dual Power Supply Ports

- Highest Reliability achieved through Redundant Remote Control and Redundant Power Supplies

The Model 7282 2-Channel A/B Switch DB25 Interface with Dual Serial Remote and Power Ports provides a powerful and versatile tool to manage switching requirements. The system affords local and remote access functionality. Remote access can be accomplished by RS232 commands sent via the Remote Serial Ports. Users can remotely monitor status and control switch functions.

Features:
Switch ports are transparent to all data.
Both channels are switched simultaneously.
All switched signals are passed via copper contact relays that
maintain their position and continuity even in the event of a
power loss or failure.
Connecting the Serial Remote Port 1 of each Model 7282 unit in
a multi-drop format will allow a command sent by the first serial
control device to be heard by all connected Model 7282 units.
Connecting the Serial Remote Port 2 of each Model 7282 unit
allows a command sent from the second control device to be
received by all connected Model 7282 units.
Each PathWay® Model 7282 AB switch is addressable.
Each Model 7282 unit can be switched individually or all
can be switched simultaneously.
Remote control commands include: changing switch position,
querying switch position, and lock/unlock pushbutton.
All A, B, and Common ports on the Model 7282 are DB25 female connectors.
All (25) signal lines of the DB25 RS530 interface connectors are supported.
There are two channels, each containing an A, B and COMMON
port for a total of 6 switch ports on the rear panel.
LEDs on the front panel display switch position (A/B), lockout status and power status.
Dual power supply ports allow each of two separate external power supplies
to be connected to the unit for redundancy. Internal circuitry will automatically
regulate which supply source powers the unit. If a supply is removed, the supply remaining will power the unit.
Unit mounts in a standard 2U High, 19" wide equipment rack.
Multiple Model 7282 switches can be cascaded together
for simultaneous switching.
Mode 7282 can be utilized to switch RS-232 interface.
Electro Standards manufactures a wide range of RS-232 switches.
Municipalities, schools, government: This product is on GSA Schedule!

Specifications:
CONNECTORS: (6) DB25(F) Connectors on rear panel labeled
A1, B1, COM1, A2, B2, COM2
FRONT PANEL CONTROLS: Manual pushbutton, switches both
channels simultaneously.
REMOTE CONTROLS: (2) DB9(F) Connectors on rear panel accept
multidrop RS232.
FRONT PANEL DISPLAY: (2) LEDs A, B, indicate switch status
and power presence.
POWER: (2) Power Jacks on rear panel accept power from
(2) CE and UL listed table mount power modules, 100 VAC/240VAC, 50/60Hz (included with unit) (Cat. No. 517277).
DIMENSIONS: 3.5" H x 19.0"W x 8.0"D. (48.3 x 8.9 x 20.3 cm)
WEIGHT: Approx. 5.0 lbs (2.3 Kg)
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=223

Model 7280 HD15 & DB9 Crossover Toggle Switch with Remote Contact Control

The PathWay® Model 7280 HD15 and DB9 Crossover toggle network switch with remote contact control allows two pairs of compatible devices to exchange interconnections. The M7280 network switch can be manually controlled via the front panel toggle switch or remotely controlled via the rear panel screw terminal Remote port. The remote port screw terminal supports 14/16 AWG wiring.

Each channel, A, B, C, D, contains one HD15 port and one DB9 port. Front panel LEDs display the current switch position: Normal or Crossover. In the Normal position, A connects to C and B connects to D. In the Crossover position, A connects to D, and B connects to C. When the toggle switch is in the Crossover position, remote control is disabled.

Additionally, the Model 7280 network switch features side-plate mount holes. There is a separate power supply for the Model 7280. One end of the cord plugs directly into the rear panel connector labeled Power, the other end plugs into a 110 VAC, 60 Hz power outlet. Power to the unit is 12 VAC.

Features:
M7280 network switch allows two pairs of compatible devices to exchange interconnections.
Control manually via front-panel toggle switch.
Control remotely via rear-panel screw terminal Remote port.
Each channel (A, B, C, D) contains one HD15 port and one DB9 port.
LEDs display current switch position: Normal or Crossover.
All 25 signal lines of the combination interface are supported.
Unit has mounting holes to mount on left or right side plate.

Specifications:
Rear Panel Connectors:
(4) HD15 video connectors,
(4) DB9 Serial Interface connectors.
Controls: (1) Manual toggle switch on front panel.
Display: (2) Front panel LEDs display switch position.
Power: UL approved, Wall Mount Module, 115 VAC, 60 Hz.
Remote: Remote port screw terminals accept 2-Wire 14/16 AWG wiring.
Dimensions: 1.75" H x 8" W x 8" D.
Weight: 2.5 lbs.

This high-quality network switch is available to US city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

For a custom switch call our friendly customer support staff at 401-943-1164, email eslab@electrostandards.com, or complete our online form: http://www.electrostandards.com/Products-Custom/Copper-Switch/

All data switches, data communication products, and data acquisition products are subject to a one year warranty against manufacturing defects. The limit of ESL liability is limited to the cost of the ESL product provided.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=254

Model 7345 RJ45 100-BASE-T A/B Switch with Remote Serial Control, Cat 5 Compliant

The PathWay® Model 7345 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common. A front panel pushbutton allows the user to select the switch position. LED indicators on the front panel display the switch position.

The unit also has an RS232 serial port for remote control. The Remote port allows monitoring and control of the switch unit. A terminal or a computer in terminal mode connected to this port can communicate with the unit, determine its status, change the switch position as desired, and/or lockout front panel switching capability.

Features:
The switch ports are transparent to all data.
All 8 pins of the RJ45 interface are switched.
All switched signals are passed via copper contact relays that maintain
their position and continuity even in the event of a power loss.
Control of the switch position from a remote serial port or the front panel pushbutton.
Front panel pushbutton may be "locked out" using the remote commands.
Cat 5 compliance.
Rackmount configuration is standard.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1764

The PathWay® Model 7273 DB25 A/B Switch with Serial Remote Control Port

The PathWay® Model 7273 Single Channel DB25 A/B Switch provides A/B switching in a low profile, desktop unit. The interface is made up of DB25 female port connectors. The Model 7273 allows the user the capability of sharing a DB25 device that is connected to its Common port, between two other devices connected to the A and B ports.

The switch may be controlled locally by manually operating the front-panel pushbutton or remotely from a DB9 female serial interface Remote port located on the rear of the unit. Remote control includes the ability to set a delay time between pushing the front panel pushbutton and the actual changing of the switch position. The front panel LED display indicates the switch position and unit power status.

Features:
The PathWay® M7273 AB network switch allows quick connection to any one of two devices from one COMMON device.
Switches all 25 pins of the DB25 interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Ideal for sharing or fallback applications.
Local control via front-panel pushbutton.
The REMOTE port accepts RS232 Serial Data ASCII commands
for switch position control and monitoring.
Remote commands to set pushbutton position change delay value.
Front-panel pushbutton control can be locked out, remotely.
Front panel LED's display switch position and power status.
The unit maintains last set position on power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB25 cables available for your switch installation.

Specifications:
PORT CONNECTORS: (3) DB25 female connectors labeled A, B, and COM.
FRONT PANEL CONTROLS: (1) manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) DB9 female connector on rear panel accepts
ASCII RS232 serial data for remote control operation.
POWER: UL approved 120VAC, 60 Hz wall mount power module supplies
12 VDC, 500mA to the unit.
DIMENSIONS: Desktop: 2.75" H x 8" W x 7.25" D. (20.3 x 7.0 x 18.4 cm)
WEIGHT: Approximately 2.5 lbs. (1.1 Kg)
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed table mount power module, 100 VAC / 240 VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Electro Standards’ staff of knowledgeable sales engineers is available to assist with product and application questions: 401-943-1164, eslab@electrostandards.com.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=220

Path Way® Model 7267 Dual Channel RS-232 / RS-530
A/B Switch with Remote Control via Contact Closure

The PathWay® Model 7267 network switch provides simultaneous switching of two DB25 channels in a low profile, 19-inch wide, 1U high, rackmount unit. This compact network data switch allows two devices connected to the A and B ports of channel one to be shared with a single device connected to the COMMON port of channel one while, simultaneously, allowing two devices connected to the A and B ports of channel two to be shared with a single device connected to the COMMON port of channel two. The switch position can be controlled by either the front panel pushbutton or through the remote control port on the rear panel. The current switch position is displayed by front panel LEDs and is also indicated by signals on the remote control port. The unit retains its current switch position and signal path continuity even in the event of power failure.

Features:
Supports (2) channels of A/B Switch function.
M7267 AB data switch provides simultaneous switching of both channels between positions A and B.
Remote switching via contact closure of specified pins of DB15 remote port on rear panel.
Local switching via a front panel pushbutton.
All 25 pins of the DB25 interface of each channel are switched.
All (6) DB25 female ports are located on the rear panel:
(2) A
(2) B
(2) COMMON
Status LEDs indicate the switch position and power status.
Switch maintains switch position and continues to pass data in event of power loss.
Unit mounts in standard 19" equipment rack, 1U space.
Power requirement 48 Volt DC. (not included with unit)
Electro Standards manufactures a wide range of RS-232 network switches.

Specifications:
Connectors:
(6) DB25 female connectors;
A1, B1, COMMON 1,
A2, B2 and COMMON 2.
Front Panel Controls: Manual pushbutton
Remote Control: DB15 female connector on rear panel accepts contact closure.
Local Display: (2) LEDs on front panel display switch position and power present.
Remote Display: Switch position indicated by signals, open/close, on remote connector.
Power: Power Jack on rear panel accepts 48 Volt DC input. Power supply not included with unit.
Dimensions: 1.75" H x 19.0" W x 10.0" D.
Weight: Approximately 4.0 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=219

Model 7265 Dual Channel RS232/RS530 A/B Switch with Remote Control Port

The PathWay® Model 7265 Dual Channel RS232 / RS530 A/B Switch provides two channel switching in a low profile, 19-inch 1U rack unit. Each channel allows the user the capability of sharing a single DB25 interface device connected to the Common port among two other devices connected to the A and B ports.

The switch may be controlled locally by manually operating the front panel push buttons or remotely from the DB15 Control port located on the rear of the unit. The front panel LED display indicates the switch position and unit power status.

Features:
Each channel allows quick connection to any one of two devices from one COMMON device.
Switches ALL signal pins. Pins 1 (Shield) and 7 (Signal Ground) are bussed through.
Two independent switch channels.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Local control via front-panel pushbuttons.
Remote switching via contact closure.
Remote control port allows off-site monitoring and switch management.
Front-panel LED's display switch position and power status.
Retains last switch position even in the event of power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB25 cables available for your switch installation.
Municipalities, schools, government: On GSA Schedule!
A single channel unit is available. (See Model 7266 Catalog No. 304266)

Model 7265 Specifications:
PORT CONNECTORS: (6) DB25 female connectors, an A, B, and Common
for each of two channels.
FRONT PANEL CONTROLS: (2) Manual pushbuttons allow local switching.
DISPLAY: (4) Front panel LED's display channel switch position.
REMOTE (1) DB15 (F) connector on rear panel accepts
contact closure switch commands.
POWER: UL approved 110/120VAC, 60 Hz wall mount power module
supplies 12 VDC, 500 mA to the Model 7265.
DIMENSIONS: 19.0" W x 1.75" H x 10.0" D. (48.3 x 4.4 x 25.4 cm)
WEIGHT: Approximately 5.0 lbs (2.3 Kg)
Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=218

Model 7242S DB25 A/B Switch / Rackmount with 10-BASE-T Secure Setup, Remote Interface

- IP Addressable

The PathWay® Model 7242S Single Channel RS232/RS530 DB25 A/B Network Switch provides one channel switching in a low profile, 19-inch 1U rack unit. The user has the capability of sharing a single DB25 interface device connected to the Common port among two other devices connected to the A and B ports.

Model 7242S data switch may be controlled locally by manually operating the front-panel pushbutton or remotely over the 10-BASE-T RJ45 remote port located on rear panel. This control interface has an IP address and listens on the standard TELNET port (23) for incoming connection. The front panel LED display indicates switch position, unit power status, and network status.

LOCAL SWITCHING is achieved by simply pressing the front panel pushbutton. The switch will change to the newly selected position as indicated by the front panel position LED's, A and B. The LINK and STATUS LED's indicate the status when the 10-Base-T Control port is connected to a network.

REMOTE SWITCHING of the unit is done through the 10-Base-T Control port on the rear panel. This Control interface has an addressable IP address and listens on the standard TELNET port (23) for incoming connection. When connected, the unit responds to the Remote Command Set.

Features:
Model 7242S AB data network switch provides single channel switching in
a low profile, 19-inch 1U rack unit.
Allows secure access to two networks from one computer or workstation.
DB25 (F) ports are transparent to all data.
Switch from front panel pushbutton, or remotely via IP addressable 10BASE-T port.
Secure Setup / configuration access limited by password protection.
All 25 pins of the DB25 interface are switched.
LED's display switch position, unit power and network status.
Switch maintains position and continues to pass data during power loss.
Remote command for lockout of front panel pushbutton.
Remote command for query of current switch state.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB25 data cables available.
Electro Standards manufactures a wide range of RS-232 switches.

Model 7242S DB25 A/B Switch Specifications:
PORT CONNECTORS: (3) DB-25 female connectors labeled A, B, and COMMON
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (4) Front panel LED's display switch position, power status,
and network status.
REMOTE: (1) RJ45 female connector on rear panel accepts
10Base-T LAN access Ethernet for Remote Control operation.
POWER: WIDE RANGE CE and UL listed table mount power module (Cat.No. 521895) 100VAC/240VAC, 50Hz/60Hz. Ideal for international applications.
DIMENSIONS: Rackmount, 19.0" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: 4.5 lbs. (2.0 kg)

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=216

The PathWay® Model 7242 Single Channel RS232 / RS530 A/B Switch with 10-BASE-T Remote Interface

The PathWay® Model 7242 Single Channel RS232 / RS530 A/B Switch provides one channel switching in a low profile, 19" 1U rack unit. The Model 7242 network switch enables sharing a single DB25 interface device connected to the COMMON port among two other devices connected to the A and B ports.

The Model 7242 network switch may be controlled locally by manually operating the front panel pushbutton or remotely over the 10-BASE-T RJ45 remote port located on the rear of the unit. The front panel LED display indicates switch position, unit power and network status.

LOCAL SWITCHING is achieved by simply pressing the front panel pushbutton. The switch will change to the newly selected position as indicated by the front panel position LED's, A and B. The LINK and STATUS LED's indicate the status when the 10-Base-T Control port is connected to a network.

REMOTE SWITCHING of the unit is done through the 10-Base-T Control port on the rear panel. This Control interface has an addressable IP address and listens on the standard TELNET port (23) for incoming connection. When connected, the unit responds to the Remote Command Set.

Features:
Model 7242 AB Switch provides sharing a single DB25 interface device connected to the Common port among two devices connected to the A and B ports.
DB25/Female ports are transparent to all data.
(3) DB25 Connectors: A/B/COM, all 25 signals switched.
(1) RJ45 10-BASE-T remote port.
Switch from front-panel pushbutton, or remotely via IP Addressable 10-BASE-T port.
Switch maintains position and continues to pass data during power loss.
Remote commands for lock out of front panel pushbutton.
Remote command for query of current switch state.
LEDs display switch position, unit power and network status.
Custom length DB25 data cables are available.
Electro Standards manufactures a wide range of RS-232 network switches.

Specifications:
Port Connectors: (3) DB-25 female connectors labeled A, B, and COMMON.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (4) Front panel LED's display switch position, power status, and network status.
Remote: (1) RJ45 female connector on rear panel accepts 10-Base-T LAN access Ethernet for Remote Control operation.
Power: WIDE RANGE CE and UL listed table mount power module (Cat.No. 521895) 100VAC / 240VAC 50Hz/60 Hz.. Ideal for international applications.
Dimensions: Rackmount, 19.0" W x 1.75" H x 8.0" D.
Weight: 4.5 lbs.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=215

Model 7241S DB25 A/B/C Data Switch, Rackmount Configuration, 10-BASE-T Secure Setup, Remote Interface

IP Addressable Data Network Switch
The PathWay® Model 7241S Single Channel RS232/RS530 DB25 A/B/C Network Switch provides one channel switching in a low profile, 19" 1U rack unit.

The Model 7241S data switch may be controlled locally via a pushbutton or remotely over the 10-BASE-T RJ45 remote port. This control interface has an IP Address and listens on the standard TELNET port (23) for incoming connection. Front panel indicators display switch position, unit power status and network status.

Model 7241S Features:
Model 7241S Network Switch enables sharing a single DB25 interface device connected to the COMMON port among 3 other devices connected to the A/B/C ports.
Secure Setup/Configuration access limited by password protection.
Local switching via front panel pushbutton.
All 25 pins of the DB25 interface are switched.
DB25 female ports are located on the rear panel; one each for position A, B, C, and COMMON.
Switch maintains position and continues to pass data during power loss.
Password protected remote switching via 10-Base-T remote command interface.
Switch monitors remote contact port for connection.
Remote command for lockout of front panel pushbutton.
Remote command for query of current switch state.
Network Connection Status and Link LEDs on front panel.
Electro Standards manufactures a wide range of RS-232 switches.

Specifications:
Port Connectors: (4) DB-25 (F) Ports A, B, C and COMMON.
Control Connector: (1) RJ45 Jack on rear panel.
Manual Control: (1) Front panel pushbutton.
Power: 115VAC / 60 Hz, UL approved wall mount supply.
Display:
(3) Red LEDs display switch position and indicate power presence.
(2) LEDs display Status and Link.
Dimension: 1.75" H x 19" W x 8" D.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=214

PathWay® Model 7223 DB15 A/B Switch with 10BASE-T LAN/WAN Access - Remotely Controllable Network Switch

- IP Addressable Switch for Critical Network Alternate-Path Switching!

The Model 7223 enables sharing of a single device with a DB15 interface connector among two other devices. Control the Model 7223 manually with a front-panel pushbutton or remotely via a LAN/WAN connection to the unit's 10BASE-T rear-panel port. A standard Web browser, such as MS Explorer, pointed at the IP address of the unit launches a graphical user interface to the switch. The Web access allows the user to remotely control the switch position, see the current status, and lockout the front-panel pushbutton, if desired.

IP Addressable Switch for Critical Network Alternate-Path Switching!

The PathWay® Model 7223 network switch enables sharing of a single device with a DB15 interface connector among two other devices.

Features:
Enables sharing of a single device with a DB15 interface connector among two other devices.
Control manually via pushbutton or remotely via LAN/WAN connection to the unit's 10BASE-T rear-panel port.
A standard Web browser pointed at the IP address of the unit launches a graphical user interface to the switch.
The Web access allows the user to remotely control the switch position, see the current status, and lockout the front-panel pushbutton.
Create user categories with different authorities.
Password protected.
Easy-to-use intuitive screens.
No special software required.
LEDs indicate switch position, lockout and power status at all times.
All switched signals maintain position and continuity in event of a power loss.
Switched ports are transparent to data.
All pins of the DB15 interface are switched.

Model 7223 DB15 A/B Switch with 10BASE-T LAN/WAN Access Specifications:
Rear Panel Connectors
(3) DB15/F connectors for A & B inputs and COMMON output,
all 15 pins supported and switched
(1) RJ45 connector for remote control, 10BASE-T interface
(1) Power jack
Power Supply: Unit supplied with external power module, 110VAC, 60 Hz.
Front Panel Controls: (1) pushbutton, switch position selection
Indicators: (2) red LED status indicators display current switch position.
Size: 13.6" W x 2.1" H x 7.25' D.
Weight: 2.5 lbs.

Electro Standards can supply all of your Network Cable requirements. Click here to reach our CABLES, COPPER NETWORK Webpage.

For custom network switches call our friendly customer support staff at 401-943-1164, email eslab@electrostandards.com, or complete our online form: http://www.electrostandards.com/Products-Custom/Copper-Switch/

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=206

Model 4503 Seismic-Proof DB9 A/B Switch
- Ruggedized to withstand Environmental Challenges

Model 4503 was designed to withstand an environment subject to vibrations. This switch and its feed-through connector have successfully passed the rigorous seismic testing of the EPRI "SQURTS" Program, qualifying it for use in nuclear power plants. Modle 4503 is ideal for factory floors, energy facilities, and any other harsh environment application.

Model 4503 allows data to pass through all pins of the DB9/F connector interface and switches all pins simultaneously. The Keylock Option provides "pass-key only" access to switching. Key is captive in B position and removable in A position. Model 4503 switch is available with mounting ears to secure it to a panel. It is also available in rackmount or desktop version.

Specificiations
Connectors: A, B, COM are DB9 female connectors, located on rear panel.
Controls: Two position rotary switch control located on the front panel. Keylock pass-key switch control is optional.
Desktop Size: 4.18" W x 6"

Features
- Switches all nine pins of connector interface simultaneously.
- Ruggedized to withstand vibrations.
- Switch and options have passed rigorous seismic testing.
- Ideal for power plant applications.
- Rugged all-aluminum enclosure provides EMI/RFI resistance in noisy
environments.
- Optional "pass-key only" access ensures proper authorized usage (Catalog
No. 304503-Opt-1)
- Optional "mounting ears" allow firm attachment (Catalog No. 512959).
- Optional accessory "feed-through" connector (Catalog No. 513904, DB-9
F/F Adaptor Plate).
- No power required.
- Lifetime guarantee!
- Optional Mounting Ears

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=134

The PathWay® Model 4421 CAT5 RJ45 A/B Switch with Password Serial Remote Port

The PathWay® Model 4421 is a CAT5, RJ45 Interface A/B network switch with Serial Remote allows the user the capability of sharing a single RJ45 interface device connected to the COMMON port among two other devices connected to the A and B ports with remote access functionality

The switch may be controlled locally by manually operating the front panel pushbutton. The front panel LED display indicates the switch position and unit power status. The unit also includes an RS232 serial security enhanced Supervisory Remote Port requiring a password login to access. Upon proper authentication, a terminal or computer in terminal mode connected to this port can communicate with the unit, determine its status, change the switch position as desired, and/or lockout front panel switching capability. A modem can also be connected to this port for remote access to the switch. Access to the Supervisory Remote Port feature is password protected.

Features:
Allows quick connection to any one of two RJ45 devices from one COMMON device.
Switches all 8 pins of the RJ45 interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Rated for 10/100 Base-T networks (up to Cat5).
Local control via front-panel pushbutton.
Remote control port allows off-site monitoring and switch management.
The REMOTE port accepts password protected RS232 Serial Data ASCII commands for switch position control and monitoring. GUI interface is available as an option. *
Front panel LED's display switch position and power status.
Retains last switch position in the event of power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length RJ45 cables available for your switch installation.
Municipalities, schools, government: This products is on GSA Schedule!
* OPTION: GUI Access to Remote Port: (Cat. No. 519298) Graphical User Interface software for use with a computer running Windows 95/98/ME/2000/XP.

For Rackmount Configuration, See Model 7344, Cat. No. 307344

Specifications:
PORT CONNECTORS: (3) RJ45 female connectors are labeled A, B, and COMMON.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) DB9 female connector on rear panel accepts ASCII RS232
Serial Data for Remote Control operation.
POWER: UL approved 120VAC, 60 Hz wall mount power module supplies
12 VDC, 500mA to the unit.
DIMENSIONS: Desktop 7.9" W x 2.9" H x 7.4" D.
(20.1 x 7.4 x 18.4 cm).
WEIGHT: Approximately 2.8 lbs. (1.3 Kg)

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

OPTION: Wide Range Power Module: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC 50/60Hz in place of standard 115 VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=229

Model 4407 Remotely Controllable RJ45 A/B Switch with Dual Remote

The PathWay® Model 4407 can be switched locally by depressing the front panel pushbutton or remotely over either or both of two serial remote ports. A device connected to either of the two REMOTE ports can send the proper trigger character over an RS232 serial port to change the state of the Model 4407. The switch status can also be queried remotely without changing the switch position status. All eight pins of the A/B/COM ports are supported and switched.

Model 4407 Features:
The PathWay® Model 4407 AB data switch permits remote switching
control from up to two different RS232 serial REMOTE devices.
Ideal for remote control applications.
Switch position and continuity are maintained even in the event of a power failure.
Front panel LED indicators allow on site viewing of switch status.
Rugged aluminum case provides shielding.
Other control configurations and interfaces are available upon request,
i.e. contact closure, TTL levels, etc.
Custom Length Cables are available.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Model 4407 Specifications:
CONNECTORS: (4) RJ45/F connectors labeled A, B, C, and COMMON.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front Panel LED's display switch position and power status.
REMOTES: (2) RJ45 female connectors on rear panel accept ASCII RS232
Serial Data for Remote Control operation.
POWER: UL approved 120 VAC, 60 Hz wall mount power module supplies
12VDC, 500mA to the unit.
DIMENSIONS: 5.25"W x 2.0" H x 7.25" D.
(13.3 x 5.1 x 18.4 cm)
Weight: Approximately 2.0 lbs. (0.9 kg)

OPTION: Wide Range Power Module
(Cat No. 514296) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=228

Model 4406 RJ45 Code Operated A/B Switch with Remote

Share one RJ45 interface device between two other devices with the Model 4406 RJ45 A/B Switch. Control commands sent to the Remote port enable the user to switch between two separate RJ45 devices or to monitor the current switch status. The switch may be controlled manually via a front panel pushbutton or remotely from the RS-232 serial Remote port located on the rear of the unit. Switch position status is displayed by the front panel LEDs, or can be queried by the PC connected to the Remote RS-232 serial port.

Features:
- Switch between two RJ45 interface devices locally or remotely by sending
a trigger character sequence to the unit via the Remote port.
- Remote monitoring of switch status from a PC running terminal emulation.
- Ideal for remote control applications.
- Switch position and signal integrity is maintained even during power failure.
- Front panel LED indicators allow on site viewing of switch status.
- Optional Windows compatible control software available.
- 19" rackmount option available.
- Other control configurations and interfaces are available upon request, i.e.
contact closure, TTL levels, etc.
- Rugged aluminum case provides shielding.
- Custom Length Cables are available.

Size: 5.0"W x 2"H x 7"D
Speed: Transparent.
Power: 120 VAC, 60 Hz.
Display: (2) A/B position LEDs.
Controls: (1)Pushbutton;Remote RS-232 serial port, RJ45.
Connectors: (3) A/B/COM, RJ45 jack; (1) Remote, RJ45 jack.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=227

Model 7340 RJ45 Cat 5e On-Line/Off-Line Switch, with Contact Control Remote Port, 1U Rackmount

The PathWay® Model 7340 RJ45 CAT 5e On-Line/Off-Line network switch with Contact Closure Remote Port allows the user the capability of connecting two separate devices through ports A and B, via On-Line or Off-Line connection. The switch may be controlled manually via the front panel pushbutton or remotely via Contact Closure Remote Port.

Features:
On-Line switch position connects port A to port B.
Off-Line switch position disconnects and isolates port A from port B.
The switch ports are transparent to all data.
The DB9 Remote port provides access to remotely switch the unit.
Front panel pushbutton control can be locked out remotely through
contact closure.
The unit maintains last set position in the event
of a power loss and continues to pass data.
Front panel LEDs display the current switch position and the switch
power status.
All (8) signals of the interface are switched.
Pin 9 of the remote control port has a 5 volt signal capable of providing
up to 300 mA of current. (Model 7340B, only)
Rackmount configuration is standard.
Municipalities, schools, government: The Model 7340 is on GSA Schedule GS-35F-0286V.

Specifications:
PORT CONNECTORS: (2) RJ45 Female connectors labeled A and B.
REMOTE CONTROL CONNECTOR: (1) DB9 female connector
labeled CONTROL.
FRONT PANEL DISPLAY: (2) Red LED's display switch position.
POWER: UL approved 120 VAC, 60 Hz, power module included
with the unit supplies 12 VDC, 500 mA to the unit (Cat. No. 516682) .
DIMENSIONS: Rackmount, 19" W x 1.75" H x 8" D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.0 lbs. (1.8 Kg)
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Click here or on GSA icon for details.

Optional Wide Range Power Supply: Cat No. 517277, CE and UL listed table mount power module, 100 VAC/240 VAC, 50Hz-60Hz can be ordered in place of the standard 115 VAC or 120VAC power module. Ideal for international applications.
Click Product Accessories Tab!

ONE RJ45 SWITCH: THREE REMOTE POSSIBILITIES:
SELECT THE REMOTE THAT IS RIGHT FOR YOUR APPLICATION.
For Contact Closure Remote Port with Contact Closure Feedback, see Model 7340A.
For RS-232 Remote Serial ASCII Remote Port, see Model 7340B.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1756

Path Way® Remotely Controllable Network SwitchModel 7354 RJ45A/B/C/D/E/F Switch with 10 BASE-T LAN TELNET Access.

The PathWay® Model 7354 RJ45 A/B/C/D/E/F Network Switch with 10 BASE-T LAN Telnet Access provides 6-way switching in a low profilerackmount unit. The Model 7354 network switch allows the user the capability of sharing a single RJ45 interface device connected to the COMMON port among six other devices connected to the A, B, C, D, E, F ports with
local and remote access functionality.

Remote access can be accomplished using an Ethernet 10-Base-T connection and Telnet commands. Proper authentication is required for remote access via the 10-BASE-T connection. User can monitor status and control switch functions.

Features:
Share one RJ45 port among six RJ45 ports.
All eight pins of each RJ45 port are supported.
The switch ports are transparent to all data.
Switch locally from front panel pushbutton or remotely via
Ethernet port located on the rear panel.
Remote port is 10/100 RJ45 Ethernet port. Communication
with switch is via TELNET session. User setup allows
assignment of IP address for switch unit.
Remotely select switch position, query switch position,
lockout front panel pushbutton control.
LED displays indicate switch position and power status.

Specifications
CONNECTORS: (7) RJ45 Female connectors labeled A, B, C, D, E, F and COM.
REMOTE PORT: RJ45 jack accepts 10 BASE-T LAN access
Ethernet for Remote Control.
POWER: UL approved 120 VAC, 60 Hz, wall mount power module supplies
12 VDC, 500 mA. (Included with the unit).
DISPLAY: (6) LED's indicate switch position, status, and power.
CONTROL: (1) Pushbutton control for local switching.
DIMENSIONS: rackmount, 19" W x 1.75" H x 8" D.
WEIGHT: Approx. 4.5 lbs. (2 Kg).

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=266

Path Way® Remotely Controllable Network Switch
Model 7435 Auto-Controlled 16-Channel RJ45 A/B Switch

Switch position of individual channels is controlled by sensing incoming
data on ports A and B.
IP Addressable Data Network Switch.
The Model 7435 Auto-Controlled 16-Channel RJ45 A/B Switch provides a powerful and versatile tool to manage switching requirements. The system allows the user the capability of sharing a single port RJ45 interface device connected to the Common port among two other devices connected to the A and B ports with remote access functionality. This is true for each of the switch's 16 channels.

Operation:
The port position (A or B) of individual channels in the Model 7435 is user configurable to be determined either manually, via the GUI, or automatically per the programming.

Automatic - The position of individual channels is controlled by sensing incoming data on ports A and B. The unit initially powers up in the A position on all channels. Data is monitored on both the A and B ports of every channel approximately every millisecond. If no data is received on port A for a user-specified number of seconds, the unit will then check the current status of port B. If valid data (determined by a single sample...at least 1 millisecond required to accomplish) is being received on port B, the appropriate channel(s) will switch to the port B.

If port B is also inactive, then those channels will remain in position A. If the current switch position is port B and if no data is received on port B for a user-specified number of seconds, the unit will then check the current status of port A. If valid data is being received on port A, the appropriate channels will switch to port A. If port A is inactive, the appropriate channels will remain on port B.

Manual - The position of individual channels is dictated by the user via the Graphical User Interface (GUI). A GUI panel allows the user to manually choose the position of each channel individually. In addition, other button controls allow the user to gang switch all channels for a single unit or all channels for all units (global) that comprise the switching system.

Features:
The switch ports are transparent to all data.
On all of the RJ45 ports, pins 2, 4, and 5 are switched and pin 6 is ground.
All channels can be switched simultaneously or independently.
All switched signals are passed via gold clad silver relays that maintain their position and continuity even in the event of a power loss.
All channels of the switch return to position A on power cycle.
Automatic individual channel switching between switch positions A and B via Transmit Data (TD) activity.
Remote port is 10/100 RJ45 Ethernet port. User setup allows assignment of IP address for the switch unit. Unit access via Ethernet, Graphical User Interface, Point and click control. Unit password / login required to maintain security.
Control up to (4) 16-channel switches with one Ethernet access/remote control port per set of cascaded switch units.
Remotely select any one channel to monitor Transmit Data (TD) and Receive Data (RD) from one switch or series of switches cascaded together.
One data monitor port per set of cascaded switch units.
Selectable delay between 0 to 10 seconds before scanning data on inactivity line, selection in increments of seconds.
Baud Rates to 19,200 BPS.
Switch time approximately 3.5 msec after valid Transmit Data (TD) signal presence verified.
Remote Control (1) RJ45 (F):

The switch may be controlled using an ESL Web Applet using the local area network with the Ethernet port on the rear of the unit. The Model 7435 Web-GUI Applet uses the local area network to communicate with the switch.
10/100-Base-T LAN Graphical User Interface:
The Model 7435 allows the user the capability of remote access to the switch through the LAN control port. This software will download automatically from the Model 7435 switch, but it

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=244

The PathWay® Model 7420 CAT5 RJ45 A/B Switch with Remote Control Port

The PathWay® Model 7420 network switch provides network access in a low profile unit. The Model 7420 CAT 5 switch allows a single device connected to the COMMON port to access either of two networks connected to ports A and B. Switch position can be controlled by either front panel pushbutton or through a remote control port on the rear panel. Switch position is indicated by front panel LEDs or by the query command sent to the remote port. The Model 7420 retains the current switch position and maintains continuity through the switch even during a power failure.

Features:
Model 7420 data network switch enables sharing a single CAT5 RJ45 interface device connected to the COMMON port between
two devices connected to the and B ports.
Switches all 8 pins of the RJ45 interface.
A, B and COMMON ports are transparent to data.
Manual control by front panel pushbuttons.
M7420 AB switch features manual control via pushbuttons.
Remote switch control via DB9 RS-232 Serial Control port
on the rear panel.
Switch position shown on the front panel LED display or
by devices connected through the remote port.
Remote commands include switch position control, query of switch status, and front panel lockout.
Switch position and continuity through the switch are maintained
even if power is removed or a power failure occurs.
Electro Standards can custom design CAT 5 switches to meet
your specific requirements.

All commands are ASCII CONTROL commands created by holding the [CRTL] key and character key simultaneously.
Commands Function
CTRL-A switch to A
CTRL-B switch to B
CTRL-P query for current status
CTRL-L lock out front panel pushbutton
CTRL-U unlock pushbutton
CTRL-V firmware version number

Specifications:
Port Connectors: (3) RJ45 (F) ports A, B, and COMMON ports.
Compliance: Interface meets or exceeds Category 5 performance.
Controls: (1) Manual pushbutton to select port A or B.
Display: (2) Red LEDs display switch position and indicate power status.
Supervisory Remote Port: (1) DB9/female on rear panel allows remote
switch control via RS232 serial data.
Power: UL approved 110/120 VAC / 60 Hz, wall mount power module supplies 12 VAC, 500 mA to the Model 7420.
Dimensions: Desktop Configuration is standard
16.8" W x 1.75" H x 8.0" D. If rackmount option is added, the width become 19" when the ears are attached.
Weight: 3.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=243

Model 7276 Single Channel RS-232 / RS-530 A/B Switch with Fallback & Remote Control Port

Automatic Switch to Backup via Data Activity and Data Carrier Monitor!

The PathWay® Model 7276 Single Channel RS-232 / RS-530 A/B Network Switch with Fallback and Remote Control Port allows the user the capability of sharing a single port interface device connected to the Common port among two other devices connected to the A and B ports with remote access functionality. The remote port can be used to attain switch position status by using the provided set of contact closure pins. The remote port can also be used to control the switch position using a separate set of contact closure pins.

When in automatic fallback mode the unit monitors either RD activity or DCD presence on port A only. If activity or presence of the selected trigger signal (RD or DCD) is detected on Port A, the unit switches to the A Position and stays in this position while there is still activity or presence detected. If activity or presence of the selected trigger signal (RD or DCD) is lost on Port A, the unit switches to the B Position and stays in this position until activity or presence is detected on Port A. The user can override automatic fallback operation from the front panel or remote port and force the unit to operate as an A/B switch.

Features:
Switch to backup automatically via Data Activity or DCD trigger monitor. Switches back when signals restore.
The switch ports are transparent to all data.
All pins of the DB25 interface are switched.
All switched signals are passed via copper contact relays that maintain their position and continuity even in event of power loss or failure.
When power is restored, the unit loads previous position and mode of operation and checks DIP switch settings and remote port to determine the correct startup configuration.
Automatic switching based on either RD activity or DCD presence.
Automatic switching compatible with RS-232 or RS-530 protocols.
Remote control of the switch position from a contact closure REMOTE port.
Reading of the current switch position from a contact closure remote port.
Front panel LED's display position, mode and power status.

Approvals:
Certified compliant with EMC Regulations:
EN 55022:2006/A1:2007 Class A ITE Emissions Requirements (EU).
ICES-003 Issue 4 Class A Digital Apparatus Emissions Requirements (Canada).
FCC 47 CFR Part 15 Class A Emissions Requirements (USA).
Certified compliant with Safety Regulation:
EN 60950-1 including deviations to UL/CSA 60950-1 2nd edition.

his high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Click here or on GSA icon for details.

OPTION: WIDE RANGE POWER MODULE:
(Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications. For more about this product, see Accessories tab.

Specifications:
CONNECTORS: (3) DB25 (F) connectors labeled A, B and COMMON.
FRONT PANEL CONTROL: Manual pushbutton allows alternate action
A/B switching when in manual mode.
REMOTE CONTROL: (1) DB15 (F) connector on rear panel accepts
contact closure signals from Model 4077, Cat No. 514077 or similar
device. See Related Products tab for more about Model 4077.
FRONT PANEL DISPLAY: (2) LEDs labeled A and B display switch
position and power status.
POWER: UL Approved, 120 VAC, 60 Hz wall mount power module
supplies 12 VDC, 500mA to the unit.
DIMENSIONS: 1.75" H x 19" W x 8.0" D
WEIGHT: Approx. 4.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=222

Model 7275 DB25 A/B Switch with Dual RS232 Remote Control Ports
- Control the switch remotely from either of the "Two" DB9 Remote Control Ports.

The Model 7275 Single Channel DB25 A/B Switch with Dual Serial Remote Control Ports allows the user the capability of sharing a DB25 device connected to the Common port connector between two other devices connected to the "A" and "B" ports. The switch may be controlled locally via the front panel pushbutton or remotely from either of the two serial interface control ports which are located on the rear of the unit. The front panel LED display indicates the switch position and unit power status.

Features:
Can be remotely switched from either of two remote locations!
- A single channel DB25 connector interface.
- Dual Serial Remote Ports located on the rear panel.
- All (25) signals of the DB25 connector interface are switched.
- Transparent to all data.
- Switch retains the current switch position in the event of a power failure.
- Manual control via the front panel pushbutton.
- Front panel LED's indicate switch position and power status.
- Remote control via either of the DB9 Remote ports on the rear panel.
- Remote control based on ASCII character set.

Specifications
Connectors: (3) DB25/female connectors, A, B & COM.
(2) DB9/female, RS232 serial REMOTE ports.
(1) power jack
Controls: (1) Front panel pushbutton allows local selection of switch
position, A or B.
Display: (2) LED's to indicate position status and power.
Power: 12 VAC at .5 Amp, UL Approved 120 VAC, 60, Hz wall mount
power supply.
Dimension: 1.75" H x 19" W x 8" D.
Weight: 4.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=221

Model 7271 Single Channel RJ45 A/B/C/D Switch, with Serial Remote Control Port.

The Model 7271 Single Channel RJ45 Interface A/B/C/D Switch provides single channel 4-port switching in a low profile rack unit. It allows the user the capability of sharing a single RJ45 interface device connected to the Common port among four other devices connected to the "A", "B", "C" and "D" ports.

The switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB9/female serial interface Remote port located on the rear of the unit. The front panel LED display indicates the switch position and unit power status. LOCAL SWITCHING is achieved by simply pressing and holding the front panel push button. REMOTE SWITCHING of the unit is accomplished through the Remote port on the rear panel. The Remote port provides switch control based on an ASCII character command set sent via RS232 interface to the Remort port connector.

Features:
- Shares one COMMON RJ45 port among four RJ45 ports, A, B, C, & D.
- Switching performed from front panel pushbutton control or via Remote
control.
- Remote control from RS232 ASCII commands that allow the user the
ability to change the switch position, query position & lockout status,
lockout front panel controls.
- LED's on the front panel indicate switch position and power status.
- The switched RJ45 ports are transparent to all data.
- All eight signals of the RJ45 interface are switched.
- Unit maintains position and signal pathways during power loss.
- Includes wallmount power supply.
- 19" Rackmount enclosure, 1U rack height, approximately 8"D.

Specifications:
Connectors: (5) RJ45(F) port connectors on rear panel, labeled for ports A,
B, C, D and COMMON.
(1) DB9 (F) REMOTE connector on rear panel.
Control: (1) Pushbutton on front panel, selector for switch position.
Display: (4) LED's on front panel indicate switch position and power status.
Power: UL approved 115 VAC/60Hz wall mount power module (supplied
with unit).
Dimensions: 1.75" H x 19.0" W x 8.0" D.
Weight: Approximately 3.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=237

Model 4145 Automatic Fallback A/B Switch w/Optional Remote Management Port

- Fallback based on loss of carrier (DCD)

The Model 4145 Automatic Fallback Switch allows a device connected to the Common port to connect through to the "A" port. The unit monitors carrier presence (DCD) signal on the primary line, port "A". If carrier is lost, the unit automatically switches to port "B". The Model 4145 will maintain its connection to port "B" until carrier presence is again detected on port "A". When carrier is detected on port "A", the unit will automatically return to the "A" position.

The user can override automatic fallback operation from the front panel and force the unit to operate as an A/B switch. To override automatic operation, the user simply depresses the front panel pushbutton, holds it for 5 seconds, and then releases. The status LED previously lit steady ON begins to flash, representing manual override operation. Momentarily depressing and releasing the pushbutton then allows the user to change the switch connectivity. To change back to automatic operation, depress and hold the pushbutton for 5 seconds and the switch will automatically connect.

The Model 4145 can be ordered to allow remote monitoring and control of the unit. This option adds a Remote RS232 serial port allowing an off-site station to monitor and/or manage the switch. The off-site operator can monitor the operation mode, fallback or A/B, the switch position, change the mode or switch position, and lockout the front panel pushbutton operation.

Network DCD "Watch Dog" Switch - Keeps Data Flowing!

Features:
- Ideal for automatic fallback applications based on loss of carrier (DCD)
- Data, handshake, and clock lines of the RS232 interface are supported.
- Front panel LEDs display the connectivity status & verify power connection
at all times.
- Rugged aluminum case provides maximum shielding.
- Other control configurations and interfaces are available (Fallback based
on data activity is Model 4121).
- Switching using latch relays maintain connection during power loss.
- Transparent to data format and protocol.
- Optional Remote port allows off-site monitoring and switch management.
- Cables available

Specifications
Data Connectors: Common port, DB25/female. A & B ports, DB25/female.
Controls: (1) Pushbutton to select port A or B.
Display: (2) Red LEDs display switch position and indicate power presence.
Supervisory Remote Port (Option): (1) DB9/female serial RS232 port.
Power: 115VAC / 60Hz, UL approved wall mount supply.
Dimensions and Weight: 2"H x 7.9"W x 7.25"D; 2.8 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=209

The PathWay® Model 7345 Cat5 RJ45 100-BASE-T A/B Switch with Remote Serial Control

The PathWay® Model 7345 Cat5 RJ45 Interface A/B Switch allows users to connect a workstation or device between two other devices or networks. The switch employs an RJ45 Cat5 connector interface on ports A, B, and Common. A front panel pushbutton allows the user to select the switch position. LED indicators on the front panel display the switch position.

The unit also has an RS232 serial port for remote control. The Remote port allows monitoring and control of the switch unit. A terminal or a computer in terminal mode connected to this port can communicate with the unit, determine its status, change the switch position as desired, and/or lockout front panel switching capability.

Features:
The switch ports are transparent to all data.
All 8 pins of the RJ45 interface are switched.
All switched signals are passed via copper contact relays that maintain
their position and continuity even in the event of a power loss.
Control of the switch position from a remote serial port or the front panel pushbutton.
Front panel pushbutton may be "locked out" using the remote commands.
Cat 5 compliance.
Rackmount configuration is standard.
All REMOTE CONTROL commands are ASCII. A command is created by simply pressing the desired character key. The unit will accept commands in either upper or lower case.
Commands Functions
A, a switch to A
B, b switch to B
P, p query for current status
L, l lock out front panel pushbutton
U, u unlock pushbutton
V, v Model and firmware version query

Specifications:
PORT CONNECTORS: (3) RJ45 (F) Connectors labeled A, B and COM.
REMOTE CONNECTOR: (1) DB9 (F) connector, allows remote switch
control via RS232 serial data.
CONTROL: Pushbutton on front panel for local switch control.
DISPLAY: (2) Red LED's indicate switch position and power presence.
POWER: UL approved 115 VAC, 60 Hz power module supplies
12 VDC, 500 mA to the unit.
DIMENSIONS: 19.0" W x 1.75" H x 8.0" D (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs. (2.0 kg)
OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed table mount power module, 100 VAC / 240 VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1764

PathWay Model 7341 RJ45 A/B Switch, with GUI Interface to 10 Base-T LAN Remote Control, Cat 5e

The PathWay® Model 7341 RJ45 A/B Switch with 10/100 Base-T LAN Telnet Access and Cat 5e compliance provides a powerful and versatile tool to manage switching requirements. The Model 7341 data switch allows the user the capability of sharing a single port RJ45 interface device connected to the COMMON port among two other devices connected to the A and B ports with local and remote access functionality.

Remote access can be accomplished using an Ethernet 10/100 Base-T connection and GUI Interface. Proper authentication is required for remote access via the10/100 Base-T connection. Users can then monitor status, lockout front panel pushbutton control,and control switch position.

Features of the Pathway Model 7341 include:
The switch ports are transparent to all data.
All pins of the RJ45 interface are switched.
All switched signals are passed via copper contact relays
that maintain theirposition and continuity even in the event
of a power loss or failure.
Control of the switch position from a 10/100 Base-T LAN Ethernet
environment or alternately, the front panel pushbutton.
Remote GUI interface that allows user to control switch position
and obtain switch status.
Front panel push button may be "locked out" using the remote GUI Interface.
Cat 5e compliance.
Slim package, 1U rackmount is standard.

Software Features:
Access User Interface via standard web browser.
Login password authentication required.
Easy to use, simple point and click operation.
Remotely access to control or monitor the Model 7341 RJ45 A/BSwitch System.
Users can change the login password and/or the switch's IP address.
Lockout front panel manual access.
LAN access gives users across the LAN or over the Internet access to control if user network is configured accordingly.
FOR A UNIT WITH REDUNDANT POWER SUPPLIES
See Model 7341R, Cat. No. 307341R

Specifications:
PORT CONNECTORS: (3) RJ45(F) connectors, A, B, and COMMON.
COMPLIANCE: Interface meets or exceeds Cat 5e performance.
CONTROLS: (1) Pushbutton to select A or B.
DISPLAY: (2) Red LED's display switch position and indicate power
presence.
SUPERVISORY REMOTE CONTROL PORT: (1) RJ45(F) 10/100 Base-T
LAN Telnet Access.
POWER: UL approved 120VAC, 60Hz wallmount power module
supplies 12 VDC, 500 mA supplied to the Model 7341.
DIMENSIONS: 19.0" W x 1.75" H x 8.0" D.
(48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs. (2.0 Kg)

Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1770

PathWay Model® 7207 DB-9 A/B/C/D Switch with Exclusive Remote Control , Desktop

The PathWay® Model 7207 DB9 Interface 4-Position Data Switch provides switching in a compact, desktop unit. It allows the user the capability of sharing a single DB9 interface device connected to the Common port among four other devices connected to the A, B, C, and D ports. There is no local or front panel switch control on the unit. The Model 7207 can ONLY be switched remotely from the DB9/female RS-232 serial interface remote port located on the rear of the unit. The front panel LED display indicates the position and unit power status.

Features:
The switch ports are transparent to data format.
All nine (9) pins of the DB9 interface are switched.
The REMOTE port accepts RS232 Serial data ASCII
commands for the switch position control and monitoring.
The unit maintains last set switch position in the event of a
power loss and continues to pass data.
Front panel LEDs display the current switch position
and power status.
Desktop configuration is standard.

Specifications:
Port Connectors: (5) DB9(F) connectors
labeled A, B, C, D, and COMMON.
Remote Control: (1) DB9(F) connector labeled
REMOTE accepts RS232 serial data ASCII commands.
Display: (4) LED's labeled A, B, C, and D display switch position.
(1) LED labeled POWER displays power position.
Power: UL approved wall mount 110/120VAC, 60Hz
power module supplies 12 VAC, 500 mA to the Model 7207.
Dimensions: Desktop configuration 2.4" H x 8.0" W x 7.25" D.
Weight: Approximately 4.5 lbs
Ideal for "Remote Control Only" applications

Custom Length DB9 cables available!

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1771

Model 7356 6-Channel RJ45 Cat 5 A/B Switch with Local and Remote Individual Channel Control, 1U Rackmount

The PathWay® Model 7356 6-Channel RJ45 Cat5 A/B Network Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's six channels. The Model 7356 dimensions are 19" W x 1.75" H x 8" D. It weighs approximately 5.0 lbs. The switch may be controlled manually via front panel pushbuttons or remotely from an RS232 serial port located on the rear of the unit. Switch position states may be attained via the front panel LED displays or the remote RS232 serial port (DB9) located on the rear of the unit.

Features
The switch ports are transparent to all data.
Each channel is an individual switch that is independently controlled.
Switches all 8 pins of the RJ45 Interface.
Switch positions can be selected locally by ASCII Command via REMOTE port.
Each channel maintains current position in the event of a power loss, and continues to pass data.
Front panel LED's display switch position of each channel.
Specifications

Port Connectors: (18) RJ45(F) connectors total (A, B, and COMMON for each of six channels).
Front Panel Controls: (6) Pushbuttons labeled Channel 1 through Channel 6.
Display: (12) Red LED's total indicate the A or B switch positions for each of the six channels.
Supervisory Remote Port: (1) DB9(F) connector accepts RS232 serial data.
Power: UL approved wall mount 110/120VAC, 60Hz power module supplies 12 VAC, 500mA to the Model 7356.
Dimensions: Rackmount configuration 19" W x 1.75" H x 8" D.
Weight: Approximately 5.0 lbs.
OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed wall mount power module, 100 VAC / 240 VAC, 50Hz/60Hz in place of standard 115 VAC or 120 VAC power module. Ideal for international applications. See Related Products Tab.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1774

Path Way® Model 7237 8-Channel RJ45 A/B Switch with Redundant Remote Control and Power Supply

The PathWay® Model 7237 8-Channel RJ45 A/B Switch with Redundant Remote Control and Power allows the user the capability of accessing, on each channel, one of two separate devices via a device connected into the channel's Common port.

The switch may be controlled manually by a front panel pushbutton or remotely from either RS-232 serial port located on the rear of the unit.

Switch position status may be attained via the front panel LED display or either remote RS-232 serial port (DB9) located on the rear of the unit.

Features:
All (8) pins of each RJ45 interface are switched.
All switches change positions simultaneously upon command.
Transparent to data speed and protocol.
Switches maintain position in the event of power loss and
continue to pass data.
Front panel pushbutton control or Remote ASCII Command
access through the dual serial ports.
Front panel LEDs display the current switch position and
power status.

Specifications:
PORT CONNECTORS: (24) RJ45(F) connectors labeled A, B,
and COM (3 for each of the 8 channels).
DUAL REMOTE CONNECTORS: (2) DB9(F) connectors labeled
REMOTE accept RS232 serial data.
DUAL POWER: (2) UL approved 120VAC, 60Hz wall mount
power modules supply 12 VDC, 500 mA to the unit.
DISPLAY: (2) LED's indicate switch position and power.
CONTROL: (1) Pushbutton control allows local switching.
DIMENSIONS: Rackmount configuration 19" W x 3.5" H x 8" D.
WEIGHT: Approximately 7.0 lbs

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Option: Wide Range Power Supply (Cat. No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of the standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1775

Path Way® Remotely Controllable Network Switch
Model 7239 16-Channel RJ45 Cat 5 A/B Switch with Remote

The Path Way® Model 7239 16-Channel RJ45 Cat5 A/B Network Switch with Remote Access allows the user the capability of accessing, on each channel, one of two separate devices via a device connected into the channel's Common port.

The switch may be controlled manually by a front panel push button or remotely from an RS232 serial port located on the rear of the unit.

Switch position status may be attained via the front panel LED display or the remote RS-232 serial port (DB9) located on the rear of the unit.

Features:
All (8) pins of each switch port are transparent to all data.
All switches change position simultaneously when commanded.
Switches maintain position on power loss and continue to pass data.
Front panel pushbutton control or Remote ASCII Command access
through the serial port.
Front panel LEDs display the current switch position and power status.
Rackmount configuration is standard.
Requires customer supplied 24 VDC, 500 mA power input.

Specifications:
Port Connectors: (48) RJ45(F) labeled 1 - 16 in each
of the groups A, B, and COMMON.
Remote Control: (1) DB9(F) connector accepts RS232 serial data.
LED's: (2) labeled A and B, indicate switch position and power status.
Control: (1) Pushbutton for local switch control.
Power: Requires customer supplied 24 VDC, 500 mA Power Input.
A mating power connector is included with the Model 7239.
Dimensions: 19.0" W x 3.5" H x 14.0" D.
Weight: Approximately 4.5 lbs

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1778

Model 7352 Dual CAT5e RJ45 A/B/OFFLINE Switch with 10/100 BASE-T Remote Access and GUI

The PathWay® Model 7352 DUAL CAT5e RJ45 A / B / OFF-LINE Switch with 10/100 Base-T LAN Telnet Access and GUI, has two channels. Each channel allows the user the capability of sharing a single port interface device connected to the COMMON port among two other devices connected to the A and B ports or to be switched to OFFLINE for complete isolation.

Remote access can be accomplished using an Ethernet 10/100-Base-T connection and either Telnet commands or Graphical User Interface GUI. Proper authentication is required for remote access via the 10/100-Base-T connection. The user can monitor status and control switch functions.

Features:
The switch ports are transparent to all data.
All 8 pins of the RJ45 interface are switched.
Interface meets Cat5e performance.
All switched signals are passed via latching copper contact relays that maintain their position and continuity even in the event of a power loss or failure.
No local control.
Exclusive Remote Control of the switch position from a 10/100-Base-T LAN Ethernet environment.
Remote Telnet command interface or Graphical User Interface that allows the user to control switch position
and obtain switch status.
Front panel LEDs display switch position for each channel as well as power status.

Software Features:
Access User Interface via standard web browser.
Login password authentication required.
Easy to use, simple point and click operation.
Remotely access to control or monitor the
Model 7352 Dual RJ45 A/B/OFF-LINE Switch System.
Users can change the login password and/or the switch's IP address.

Specifications:
PORT CONNECTORS: (6) RJ45(F) connectors, an A, B, and COMMON
for each of the two channels.
EXCLUSIVE REMOTE CONTROL: (1) RJ45 connector, labeled CONTROL
having Ethernet 10/100 BaseT interface, accepts Telnet commands
or Graphical User Interface.
DISPLAY: (4)LED's, an A, B, for each of the two channels.
POWER: UL approved wall mount 120VAC, 60Hz power module supplies
12 VDC, 500 mA to the Model 7352.
DIMENSIONS: Rackmount configuration 19" W x 1.75" H x 8" D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs. (2.0 Kg)

OPTION: WIDE RANGE POWER MODULE:
(Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications. For more about this product, see Accessories tab.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1777

Model 7810 8-to-1 HD-15 Switch with 10 BaseT/100 BaseTX LAN Access

The PathWay® Model 7810 8-to-1 HD-15 Data Switch with 10 BaseT/100 BaseTX LAN Access, allows the user the capability of sharing a single port HD-15 interface device connected to the "COMMON" port among eight other devices connected to the Channel 1-8 ports with local and remote access functionality. Remote access can be accomplished by a 10-Base-T/100 Base Tx connection.

Proper authentication is required for remote access via the 10 BaseT/100 BaseTX connection. Users can remotely monitor status, control switch functions, lock/unlock front panel access and configure the LAN Access port.

Features:
The switch ports are transparent to all data.
Twelve of the HD-15 interface pins are switched.
All switched signals are passed via copper contact relays
that maintain their position and continuity even
in the event of a power loss or failure.
Remote control of the switch position from a 10 BaseT/100 BaseTX LAN Ethernet environment or alternatively, the front panel push button.
Rackmount configuration is standard.

Software Features:
Access User Interface via standard web browser.
Login password authentication required.
Easy to use, simple point and click operation.
Remote access to control or monitor the Model 7810 Switch System.
Users can change the login password and/or the switch's IP address.
Lockout front panel manual access.
LAN access gives users across the LAN or over the internet access to
control if user network is configured accordingly.

Specifications:
Port Connectors: (9) HD15 (F) connectors labeled
CHANNEL 1-8 and COMMON.
Remote Port: (1) RJ45 (F), accepts 10 Base-T LAN access
Ethernet for Remote Control.
Power: UL Approved 110/120VAC, 60 Hz wall mount
power module supplies 12 VDC, 500 mA to the Model 7810.
Display: (8) Red LED's indicate switch position, status and power.
Control: (1) Pushbutton control allows local switching.
Dimensions: 19" W x 3.5" H x 10" D.
Weight: 4.5 lbs.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1776

Model 7277 DB9 A/B Switch, with Contact Control Remote Port, 1U Rackmount

The Model 7277 DB9 A/B Switch with Contact Control Remote Port allows the user the capability of accessing two separate devices, ports A and B, via connection through a device connected to the Common port.

The switch may be controlled manually via the front panel pushbutton or remotely from a DB9 Control port located on the rear of the unit.

The front panel LED display indicates the switch position and power status.

Features:
The switch ports are transparent to all data.
The DB9 Remote Control port provides access to remotely switch the unit
by dry contact open/close logic.
Front panel pushbutton control can be locked out remotely through contact closure.
The unit maintains last set position on power loss and continues to pass data.
Front panel LEDs display the current switch position and the switch power status.
All (9) signals of the interface are switched.

Specifications:
PORT CONNECTORS: (3) DB9(F) connectors on rear panel labeled A, B, and COM.
FRONT PANEL CONTROL: Manual pushbutton allows selection of switch position.
REMOTE CONTROL PORT: (1) DB9(F) Control connector accepts contact closure
signals from a remote device.
FRONT PANEL DISPLAY: (2) LED's A, B, indicate switch state and power status.
POWER: UL approved 120 VAC, 60 Hz, wall mount power module supplies
12 VDC, 500 mA to the unit.
DIMENSIONS: Rackmount, 19" W x 1.75" H x 8" D. (48.3 X 4.4 X 20.3 cm)
WEIGHT: Approximately 4.5 lbs (2 Kg). (2 Kg)
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed wall mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1782

Model 7348 Tri-Channel RJ45 Cat 5 A/B Switch, with Local and Remote Control, 1U Rackmount

The PathWay® Model 7348 Tri-Channel RJ45 Cat5 A/B Data Network Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port for each of the switch's three channels. The network switch may be controlled manually via front panel pushbuttons or remotely from an RS232 serial port located on the rear of the unit. Switch position states may be attained via the front panel LED displays or the remote RS232 serial port (DB9) located on the rear of the unit.

Features:
The switch ports are transparent to all data.
Each channel is an individual switch that is independently controlled.
Front panel pushbutton controls can be locked out remotely.
All 8 pins of the RJ45 Interface are switched.
Remote commands can switch each channel individually or all channels simultaneously.
Remote commands allow monitoring of channel switch position and lockout status.
Each channel maintains last set position in the event of power loss and continues to pass data.
Front panel pushbutton control or Remote ASCII Command access through the serial port for each individual channel of the switch.
Front panel LEDs display switch position and power status.
Municipalities, schools, government: On GSA Schedule!
Specifications USB to DB9 Serial Converter Cable Available! If only USB ports are available on the computer or if a USB port is chosen to be used for any reason, a USB to DB9 serial converter cable will be needed. This cable can be provided by ESL under part number 514372.

Specifications:
PORT CONNECTORS: (9) RJ45(F) connectors total
(A, B, and Common for each of the three channels).
FRONT PANEL CONTROLS: (3) Pushbuttons labeled
Channel 1 through Channel 3.
DISPLAY: (6) Red LED's total indicate the A or B switch
positions for each of the three channels.
SUPERVISORY REMOTE PORT: (1) DB9(F) connector accepts RS232 serial data.
POWER: UL approved wall mount 120VAC, 60Hz power module supplies
12VDC, 500 mA to the unit.
DIMENSIONS: Rackmount configuration 19" W x 1.75" H x 8" D.
(48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs. (2.0 kg)
OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed table mount power module, 100 VAC / 240 VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1785

Model 8445 Tri-Channel RJ45/BNC A/B Switch, Manual Operation

High Quality Manual Data Network Switches Increase the Reliability of Your Network!

The Model 8445 Tri-Channel RJ45/BNC A/B Switch enables access to two devices per each of its three channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to BNC devices 2-A or 2-B. Channel 3 allows access to BNC devices 3-A or 3-B. All channels are switched simultaneously. This network switch supports 8 pins for the RJ45 Cat5e interface, and supports both the center conductor and shield of the BNC interface.

Features:
Simultaneously switches one RJ45 Channel and two BNC channels locally via a knob located on the front panel.
RJ45 channel tested for Cat5e compliance
Leads switched: All (8) RJ45 pins, plus BNC center conductor and shield
All ports located on the rear panel: (3) RJ45 female and (6) BNC female
Packaged in a rugged aluminum enclosure for EMI/RFI protection
Chassis size approximately 8" W x 2.25 H x 7.25" D
Four threaded screw holes located on the bottom panel.
Switching is manually operated. Requires no power.
Custom length cables are available.

Specifications:
Port Connectors:
(3) RJ45 (F), category 5e connectors on rear panel
(6) BNC (F) Connectors on rear panel
Controls: (1) Rotary Switch on front panel selects A or B
Pins Switched:
RJ45: All 8 Pins Switched
BNC: Center Conductor and Shield
Power: No power required
Enclosure: Shielded Aluminum Enclosure
Dimensions: 8"W x 7.25"D x 2.25"H
Weight: Approximately 2.5 lbs

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1784

The PathWay® Model 7344 Cat5 RJ45 Interface A/B Switch with Password Serial Remote

The PathWay® Model 7344 Cat5 RJ45 Interface A/B Switch with Serial Remote allows user the capability of sharing a single RJ45 interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports with remote access functionality.

The switch may be controlled locally by manually operating the front panel pushbutton. The front panel LED display indicates the switch position and unit power status. The unit also includes an RS232 serial security enhanced Supervisory Remote Port requiring a password login to access. Upon proper authentification, a terminal or computer in terminal mode connected to this port can communicate with the unit, determine its status, change the switch position as desired, and/or lockout the front panel switching capability. A modem can also be connected to this port for remote access to the switch. Access to the Supervisory Remote Port feature is password protected.

Features:
Allows quick connection to any one of two RJ45 devices
from one COMMON device.
Switches all 8 pins of the RJ45 interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Rated for 10/100 Base-T networks (Up to Cat5).
Local control via the front-panel pushbutton.
Remote control port allows off-site monitoring and switch management.
The Remote port accepts password protected RS232 Serial Data ASCII commands for switch position control and monitoring. GUI interface is available as an option.*
Front panel LED display the switch position and power status.
Retains last switch position in the event of power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Rackmount Configuration is standard.
For Desktop Configuration, See Model 4421, Cat. No. 304421
*Option: GUI Access to Remote Port: (Cat. No. 519298) Graphical User Interface software for use with a computer running Windows 95/98/ME/2000/XP.
Custom length RJ45 cables available for your switch installation.
Option: Wide Range Power Module: (Cat. No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Specifications:
PORT CONNECTORS: (3) RJ45 female connectors are labeled
A, B, and COMMON
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LEDs display switch position and power status.
REMOTE CONNECTOR: (1) DB9 female connector on rear panel accepts
ASCII RS232 Serial Data for Remote Control Operation.
POWER: UL approved 20VAC, 60Hz wall mount power module supplies
12 VDC, 500 mA to the unit.
DIMENSIONS: Rackmount Configuration: 19.0" W x 1.75" H x 8.0" D
(48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs (2.0 Kg)

Don't forget to order RJ-45 Cat 5 patchcords. Custom lengths and many colors are available!

For custom network switches call our friendly customer support staff at 401-943-1164, email eslab@electrostandards.com, or complete our online form: http://www.electrostandards.com/Products-Custom/Copper-Switch/

PathWay® is a registered trademark of Electro Standards Laboratories.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1789

Model 7259 Dual Channel RS-530 A/B Switch, DB25 Interface, with Exclusive Automatic Remote Control & Remote Monitoring

The PathWay® Model 7259 Dual Channel RS-530 2-Position Switch with DB25 Interface, Remote Control and Auto-Switching Functions allows the user two independent channels of AB switch function. The A/B function permits access of either of two devices connected to ports A and B, to a single port, the COMMON port.

This A/B data switch is exclusively controlled remotely from a device connected to its REMOTE port. The Remote port has a custom interface DB25 connector located on the rear of the unit. The various status, monitoring and control signals present on this port allow the switch to be managed by a device capable of interpreting these signals and, based on these signals, issue control commands to be executed by the switch. The details of operation are discussed in the Operator's Manual. The switch position status is displayed on the front panel LED's. There are no local control buttons on the unit. All position control is managed via the Remote port.

Features:
DB25 Connectors - A, B, and COMMON ports, both channels.
All (25) signal lines of the DB25 RS530 interface connector supported.
The switched ports are transparent to all data.
Channels 1 & 2 are switched independently.
Switch position is managed by the device connected to the Remote port, exclusively.
The switch will monitor data and when the switch detects a loss of signal will provide a 1 second time delay before reporting to the external remote control device.
Switches are latching and maintain their position during power loss.
Switch data activity and position may be monitored via the Remote port.
Switch provides data activity status from RD, pins 2 & 14 on the RS530 output of each channel as follows: activity present, send high signal; send low signal if no activity.
Front panel LEDs display the current switch position and power status.

Specifications:
Port Connectors: (6) DB25 (F) connectors for A, B, and COMMON of channels 1 and 2.
Remote Control: (1) DB25(F) connector on rear panel accepts contact closure signals to control switches.
Display: (4) LED's, indicate channel 1 and channel 2 switch position, and power status.
Power: UL approved 100-240 VAC, 50/60Hz wall mount power module supplies 12 VDC, 1.5A to the unit. (power module Cat.No. 517277).
Dimensions: Rackmount 19.0" W x 8.0" D x 1.75" H (1U rack height).
Weight: Approximately 4.5 lbs
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Custom Length Cables Available!

For custom network switches call our friendly customer support staff at 401-943-1164, email eslab@electrostandards.com, or complete our online form: http://www.electrostandards.com/Products-Custom/Copper-Switch/

PathWay® is a registered trademark of Electro Standards Laboratories.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1792

Model 7278 Single Channel RJ45, Cat 5e, A/B/C/D Switch, with Serial Remote Control

The PathWay® Model 7278 RJ45, Cat5e, ABCD Switch with Serial Remote Control allows the user the capability of accessing four separate devices, ports A, B, C, and D via connection through a device connected to the Common port.

This 4-Position Switch may be controlled locally using the front panel pushbutton or remotely from a DB9/F port located on the rear of the unit using Serial ASCII Commands. Switch position states may be attained locally via the front panel LED display or remotely using Serial Commands.

Features:
Allows quick connection to any one of four devices from one common device.
Switches all eight pins of the RJ45 interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Certified Cat 5e compliance.
Local control via front-panel pushbutton.
Remote control port allows off-site monitoring and switch management.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch
position control and monitoring.
Front-panel pushbutton control can be locked out, remotely.
Front panel LED's display switch position and power status.
Retains last switch position in the event of power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length RJ45 cables available for your switch installation.
Municipalities, schools, government: This product is on GSA Schedule!

Specifications:
PORT CONNECTORS: (5) RJ45 (F) Connectors labeled A, B, C, D and COMMON
DISPLAY: (4) Red LED's indicate switch position and power status.
FRONT PANEL CONTROL: (1) Front panel pushbutton allows local switching.
REMOTE: (1) DB9(F) connector allows remote switch control via ASCII
RS232 serial data.
POWER: UL approved 120 VAC, 60Hz wall mount power module supplies
12 VDC, 500 mA to the unit. (Cat. No. 516682)
DIMENSIONS: Rackmount configuration 19.0" W x 1.75" H x 8.0" D.
(48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs (2.0 Kg)
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Option: Wide Range Power Module: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1790

Model 7254 Dual Channel RS530 Mode-S Switch, DB25 Interface, with Exclusive Automatic Remote Control & Monitoring

The PathWay® Model 7254 Dual Channel RS-530 Mode-S, AB Switch with DB25 Interface, Remote Control and Auto-Switching Functions allows the user two independent channels of A/B switch function. The A/B function permits data on input MPS ports from either of two devices connected to ports MPSA-IN and MPSB-IN, to stream through to output ports MPSA-OUT and MPSB-OUT, respectively. Only one position, A or B, may stream data at a time for each channel. The Model 7254 is configured to mount in a standard 19 inch equipment rack within 1U of rack space.

The switch is controlled remotely from a device connected to its REMOTE port. The Remote port has a custom interface DB25 connector located on the rear of the unit. The various status, monitoring and control signals present on this port allow the switch to be managed by a device capable of interpreting these signals and, based on these signals, issue control commands to be executed by the switch. Details of operation are discussed in Operator's Manual.

The switch position status is displayed on the front panel LEDs. There are no local control buttons on the unit. All position control is managed via the Remote port.

Features:
The switched ports are transparent to all data.
The DTR / DCD lines of the RS530 interface are switched based on desired position, TXD, TXC are passed through the unit from IN to OUT at all times.
Channels 1 & 2 are switched independently.
Switch data activity may be monitored via the Remote port.
Switch position can be interpreted / read by status pins that are part of the Remote port.
Switch position is managed by the device connected to the Remote port, exclusively.
Front panel LEDs display the current switch position and power status.
Switches are latching and maintain their position during power loss.
Twelve pins per channel are supported (4 pins switched, 8 pins bussed through).

Specifications:
Port Connectors: (8) DB25 (F) connectors, (4) for each channel, labeled MPSA-IN, MPSB-IN, MPSA-OUT, MPSB-OUT.
Display: (4) LED's, (2) for each channel, labeled A and B. The LEDs indicate channel switch position and power status.
Remote Control: (1) DB25(F) connector accepts custom contact closure logic symbols.
Power: UL approved wall mount 110/120VAC, 60Hz power module supplies 12 VAC, 500 mA to the unit.
Dimensions: Slim rackmount 19" W x 1.75" H x 8.0" D
(48.3 x 4.4 x 20.3 cm)
Weight: Approximately 4.5 lbs (2.0 Kg)

Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1791

PathWay® Model 7272 Single Channel RS-530 A/B Switch, DB25 Interface with Contact Control Remote Control Port

The PathWay® Model 7272 Single Channel RS530 AB Network Switch with DB25 connector interface supports connections between a single RS530 device or peripheral to be shared between two other devices or peripherals connected to ports A or B. These ports are also DB25 connectors and each supports an RS530 interface. The Model 7272 Single Channel data switch is compactly enclosed in a low profile, 19-inch 1U rack unit.

The Model 7272 data switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB9 Contact Control Remote port located on the rear of the unit. The front panel LED display indicates the switch position and unit power status.

Features:
Allows quick connection to any one of two DB25 devices from one COMMON device.
A, B port connectors - DB25 (female)
COMMON port connector - DB25 (male).
All (25) signal lines of the DB25 RS530 interface connector are switched.
Eliminates the need to plug and unplug cables.
Local switch position control via pushbutton on front panel.
Remote control via contact closure of specified pins of DB9 Remote port.
LED's display switch position and power status.
Transparent to data speed and format.
When power is lost, unit retains last switch position and continues to pass data.
When power is restored, switch position will be determined by the state of contact command on REMOTE port.
Unit mounts in standard 19" equipment rack, 1U rack space.
Wide range power supply is standard with this unit.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB25 cables available for your switch installation.

Specifications:
PORT CONNECTORS: (2) DB25(F) port connectors labeled A and B on rear panel.
(1) DB25(M) connector labeled COMMON on rear panel.
REMOTE CONTROL: (1) DB9(F) REMOTE connector on rear panel allows remote switch control via contact closure.
CONTROL: (1) Pushbutton on front panel allows local control of switch position.
DISPLAY: (2) LED's indicate switch state and power presence.
POWER: Wide Range Power Module (Cat No 517277) CE and UL listed table mount power module, 100VAC / 240VAC, 50Hz/60Hz is included with the unit. Ideal for international applications.
DIMENSIONS: Rackmount 19.0" W x 8.0" D x 1.75" H (1U rack height). (48.3 x 20.3 x 4.4 cm).
WEIGHT: Approximately 4.5 lbs. (2.0 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1794

PathWay® Model 7274 Single Channel RS530 A/B Switch, DB25 Interface with Contact Control Remote Control Port

The PathWay® Model 7274 Single Channel RS530 AB Switch with DB25 connector interface supports connections between a single RS530 device or peripheral to be shared between two other devices or peripherals connected to ports A or B. These ports are also DB25 connectors and each supports an RS530 interface. The Model 7274 Single Channel unit is compactly enclosed in a low profile, 19-inch 1U rack unit.

This network switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB9 Contact Control Remote port located on the rear of the unit. The DB9 Remote port provides control by dry contact open/closure logic. The front panel LED display indicates the switch position and unit power status.

Features:
Allows quick connection to any one of two DB25 devices from one COMMON device.
DB25 connectors - A, B, and COMMON ports are all DB25 female connectors.
All (25) signal lines of the DB25 RS530 interface connector are switched.
Eliminates the need to plug and unplug cables.
Connections through the switch are transparent to data speed and format.
Local switch position control via pushbutton on front panel.
Remote control via contact closure of specified pins of DB9 Remote port.
Remote control allows off-site monitoring and switch management.
LED's display switch position and power status.
When power is lost, unit retains last switch position and continues to pass data.
When power is restored, switch position will be determined by the state of contact command on REMOTE port.
Wide range power supply is standard with this unit.
Attractive anodized black box packaging provides EMI/RFI shielding.
Unit mounts in standard 19" equipment rack, 1U rack space.
Custom length DB25 cables available for your switch installation.

Specifications:
PORT CONNECTORS: (2) DB25(F) port connectors labeled A and B on rear panel.
(1) DB25(F) connector labeled COMMON on rear panel.
REMOTE CONTROL: (1) DB9(F) REMOTE connector on rear panel allows remote switch control via contact closure.
CONTROL: (1) Pushbutton on front panel allows local control of switch position.
DISPLAY: (2) LED's indicate switch state and power presence.
POWER: UL approved 100 VAC - 240 VAC, 47-63 Hz (wide range) wall mount
power module supplied with the unit. Ideal for international applications.
DIMENSIONS: Rackmount 19.0" W x 8.0" D x 1.75" H (1U rack height) (48.3 x 20.3 x 4.4 cm)
WEIGHT: Approximately 4.5 lbs (2.0 Kg)
APPLICATION: The drawing illustrates a single DB25 interface device connected to the COMMON port sharing between two DB25 interface devices connected to the A and B ports. A Contact Closure device is connected to the DB9 remote allowing remote control via contact closure signalling.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1793

M7353 Tri-Channel RJ45 Cat 5 A/B/Off-Line Switch, with Remote Control via Contact Closure

The PathWay® Model 7353 RJ45 Cat5 A/B/Off-Line Switch with Remote Contact Control allows the user the capability of accessing two separate devices, ports A & B via connection through a device connected to the Common port for each of the switch's three channels.
This network switch may be controlled remotely from a DB9/F port located on the rear of the unit using contact control. Switch position states may be attained via the front panel LED displays.

Features:
The switch ports are transparent to all data.
All pins of the RJ45 interface are switched.
Each channel is an individual switch that is commanded separately from the other switches in the unit.
Exclusive Remote contact control to switch the position of each individual channel (No front panel control).
Each channel switches to Off-Line on power loss.
Front panel LEDs display the current switch position and power status.
Tested for Cat 5 compliance.
Custom length and color RJ45 Cat5 cables available.

Specifications:
Port Connectors: (9) Shielded RJ45(F) connectors for A, B, and COMMON of channels 1, 2, and 3.
Remote Control: (1) DB9(F) Connector accepts contact control signals.
Display: (6) LED's on front panel indicate switch position and power status.
Power: UL Approved 110/120VAC, 60Hz wall mount power module supplies 12 VAC, 500 mA to the unit.
Dimensions: 19" W x 1.75" H x 8" D.
Weight: 4.5 lbs

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1798

Model 7334 5-to-1 BNC Switch with Remote Control

Switch ANY BNC interface device with the Model 7334.

The PathWay® Model 7334 5-to-1 BNC Switch with Remote Control allows the user the capability of accessing five separate devices, ports A through E, via connection through a device connected to the Common port of the switch.

This 5-position switch may be controlled manually via the front panel pushbutton or remotely from an RS-232 serial port located on the rear of the unit.

Network Switch position status may be attained via the front panel LED display or the remote RS-232 serial port (DB9/F) located on the rear of the unit.

Features:
Allows quick connection to any one of five devices from one COMMON device.
Eliminates the need to plug and unplug cables.
Local control via front-panel pushbutton.
Remote control port allows off-site monitoring and switch management.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control and monitoring.
Both the center pin and shell signals are switched.
The switch ports are transparent to all data.
Front-panel pushbutton control can be locked out, remotely.
Front-panel LED's display switch position and power status.
Retains last switch position in the event of power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
Slim, 1U High rackmount package is standard, desktop is optional.
Custom length BNC Coaxial data cables for this switch are available.
Municipalities, schools, government: This product is on GSA Schedule!

Specifications:
PORT CONNECTORS: (6) BNC female coaxial connectors are
labeled A, B, C, D, E and Common.
FRONT PANEL CONTROLS: (1) Manual pushbutton allows local switching.
REMOTE CONTROL: (1) DB9 female connector labeled CONTROL accepts ASCII RS232 Serial Data for Remote Control operation.
FRONT PANEL LED DISPLAY: (5) Red LED's display switch position.
POWER: UL approved 120VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
DIMENSIONS: Rackmount 19.0" W x 1.75" H x 8.0" D
(48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs (2.0 Kg)
Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1799

Model 9065 RJ45 A/B/Offline Switch with Keylock Switching Control

Provides Switching Security and Port-to-Port Isolation.

The Model 9065 network switch module allows the user to switch a device connected to the COMMON port between devices connected to ports A or B. In the event the user wishes all of the ports to be isolated from each other, simply select the "C" or Off-Line switch position by turning the keylock actuator accordingly. In the keylock C position, all ports are isolated from each other.

Features
Manually select switch position from front panel keylock.
Keylock actuator for security.
Supports 10/100 Mbps.
Switch all eight pins of the RJ45 interface.
RJ45 interface ports - A, B, and Common.
Module Case size 2.0"W x 5.25"H x 7"D installs into the
Model 9025 Rack Chassis.
Switch case is a rugged all-aluminum enclosure
for EMI/RFI protection.
Up to eight Model 9065 Switch Modules can be housed
in one Model 9025 Rack Chassis.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1805

Model 7340, 7340A, & 7340B RJ45 CAT5e On-Line/Off-Line Switches with Remote Port, 1U Rackmount.

The PathWay® Model 7340 RJ45 CAT 5e On-Line/Off-Line network switch with Contact Closure Remote Port allows the user the capability of connecting two separate devices through ports A and B, via On-Line or Off-Line connection. The switch may be controlled manually via the front panel pushbutton or remotely via Contact Closure Remote Port.

The Model 7340 has a Contact Closure Remote Port.
The Model 7340A has a Contact Closure Remote Port with Contact Closure Feedback.
The Model 7340B has an RS-232 Remote Serial ASCII Remote Port.

Features:
On-Line switch position connects port A to port B.
Off-Line switch position disconnects and isolates port A from port B.
The switch ports are transparent to all data.
The DB9 Remote port provides access to remotely switch the unit.
Front panel pushbutton control can be locked out remotely through contact closure.
The unit maintains last set position in the event of a power loss and continues to pass data.
Front panel LEDs display the current switch position and the switch power status.
All (8) signals of the interface are switched.
Pin 9 of the remote control port has a 5 volt signal capable of providing
up to 300 mA of current. (Model 7340B, only)
Rackmount configuration is standard.
Municipalities, schools, government: The Model 7340 is on GSA Schedule GS-35F-0286V.

Specifications:
PORT CONNECTORS: (2) RJ45 Female connectors labeled A and B.
REMOTE CONTROL CONNECTOR: (1) DB9 female connector
labeled CONTROL.
FRONT PANEL DISPLAY: (2) Red LED's display switch position.
POWER: UL approved 120 VAC, 60 Hz, power module included
with the unit supplies 12 VDC, 500 mA to the unit (Cat. No. 516682) .
DIMENSIONS: Rackmount, 19" W x 1.75" H x 8" D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.0 lbs. (1.8 Kg)
This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Optional Wide Range Power Supply: Cat No. 517277, CE and UL listed table mount power module, 100 VAC/240 VAC, 50Hz-60Hz can be ordered in place of the standard 115 VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1756

PathWay Model 7339 Cat5e RJ45 A/B Automatic Fallback Switch with 10 Base-T Remote Port and GUI

The PathWay® Model 7339 CAT5E 10/100/1000BASE-T RJ45 A/B Automatic Fallback Switch with 10/100 Base-T LAN Telnet Access and GUI, allows the user the capability of sharing a single port interface device connected to the "COMMON" port among two other devices connected to the "A" and "B" ports with remote access functionality. Remote Control access can be accomplished using an Ethernet 10/100-Base-T connection and either Telnet commands or Graphical User Interface (GUI).

When in automatic fallback mode the unit monitors data activity on ports A and B. If activity is lost on A, the unit checks for data on Port B and in the presence of data, switches to position B. The Model 7339 data switch will maintain its connection to port B until data activity is detected on port A, at which time the unit will automatically return to theA position. If no data is present on either port A or on port B, the unit will stay in the A position and continue to monitor for data. The user can override automatic fallback operation from the front panel or GUI interface and force the unit to operate as an A/B switch.

Features:
Automatic switch to secondary line when no data is detected on primary line.
The switch ports are transparent to all data.
All pins of the RJ45 interface are switched.
Interface meets Cat5e performance.
All switched signals are passed via latching copper contact relays that
maintain their position and continuity even in the event of a power loss
or failure.
Control of the switch position from a 10/100-Base-T LAN Ethernet
environment.
Remote Control Telnet command interface or Graphical User Interface
that allow the user to control switch position, lockout front panel operations
and obtain switch status.
Front panel LEDs display switch position, the switch mode (automatic
fallback or manual) and power status.
Cables for the switch are available from stock!
Municipalities, schools, government: This network switch is available on GSA Schedule GS-35F-0286V.

Specifications:
PORT CONNECTORS: (3) RJ45(F) connectors labeled A, B, and COMMON.
FRONT PANEL CONTROLS: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) RJ45(F) Connector on rear panel accepts
10/100-Base-T LAN Access Ethernet and Graphical User Interface (GUI)
for Remote Control operation.
POWER: UL Approved 120VAC, 60Hz wall mount power module supplies
12 VDC, 500 mA to the unit.
DIMENSIONS: 19" W x 1.75" H x 10" D. (48.3 x 4.4 x 25.4 cm)
WEIGHT: 5.5 lbs. (2.49 Kg)
OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed table mount power module, 100 VAC / 240 VAC, 50Hz/60Hz in place of standard 115 VAC or 120 VAC power module. Ideal for international applications.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1810

PathWay Model 7465 8-Channel RJ45 A/B Switch with 10/100 BASE-T LAN TELNET Access

The PathWay® Model 7465 RJ45 8-Channel A/B Network Switch with 10/100 Base-T LAN Telnet Access allows the user the capability of sharing a device connected to the COMMON port among two other devices connected to the A and B ports for each channel. The Model 7465 8-Channel Data Switch has local and remote access functionality. Remote access can be accomplished using an Ethernet 10/100 Base-T connection and Telnet commands.

Features:
Independently control each channel either locally via front panel pushbuttons or remotely via the REMOTE port.
All 8 pushbuttons located on the front panel.
Four leads switched, pins 2, 4, 5, and 7.
Switch ports are transparent to all data.
Front panel LED's indicate switch position and power status.
Remote port is 10/100 Base-T RJ45 Ethernet port. Communicatewith switch via TELNET session. User setup allows assignmentof IP address for the switch unit.
Remotely select switch position, query switch position, andlockout front panel pushbuttons.
During power loss, switch continues to pass data in last position.
A/B Switch ports are transparent to all data.
Expanded storage temperature, -28° to +60°C
(based on component spec analysis).
Custom length RJ45 cables available. See Cat. No.'s 990328 thru 990336.
Municipalities, schools, government: On GSA Schedule!

Specifications:
PORT CONNECTORS: All (24) RJ45(F) ports are located on the
rear panel. (8) "A" ports, (8) "B" ports, (8) Common ports.
FRONT PANEL CONTROLS: (8) Manual pushbutton allows local switching.
DISPLAY: (16) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) RJ45(F) Connector on rear panel accepts
10/100-Base-T LAN Access Ethernet for Remote Control operation.
POWER: (Cat No. 520552) CE and UL listed wide voltage range and expanded
storage temperature range, table mount power module and power cord is supplied
as standard with the Model 7465.
INPUT: 100VAC/240VAC, 50Hz/60Hz.
OUTPUT: + 12VDC, 3.5A
DIMENSIONS: 19" W x 1.75" H x 10.0" D. (48.3 x 4.4 x 25.4 cm)
WEIGHT: 4.5 lbs (2.0 Kg)

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1813

Model 4502 USB Type-A A/B Switch with Remote Control, Desktop

The PathWay® Model 4502 USB Type-A A/B Switch with Remote Control allows the user the capability of accessing two USB Type-A interface devices connected to the A and B ports via one USB Type-A interface device connected to the COMMON port.

The switch may be controlled manually via the front panel pushbutton or remotely from an RS232 serial port located on the rear of the unit.

Switch position status may be attained via the front panel LED display or the REMOTE port located on the rear of the unit.

Features:
Allows quick connection to any one of two USB Type-A interface devices
from one COMMON device!
The A, B, and Common ports all are Type-A USB connectors.
Switches all 4 pins of the USB interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Local control via front-panel pushbutton.
Remote control port allows off-site monitoring and switch management.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch
position control and monitoring.
Front-panel pushbutton control can be locked out, remotely.
Front panel LED's display switch position and power status.
Retains last switch position in the event of a power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.

Specifications:
PORT CONNECTORS: (3) USB Type A connectors labeled A, B, and Common.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE: (1) DB9 (F) connector on rear panel accepts ASCII RS232 Serial
Data for Remote Control operation.
POWER: UL approved 120VAC, 60Hz wall mount power module supplies
12 VDC, 500 mA to the unit.
DIMENSIONS: Desktop configuration 7.75" W x 2.0" H x 7.0" D (19.7 x 5.1 x 17.8 cm)
WEIGHT: Approximately 2.8 lbs (1.3 kg)

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of the standard 115VAC or 120VAC, power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1814

Model 4124 DB9 A/B Automatic Fallback Switch, with Contact Closure Remote Port
Automatic fallback based on loss of data on port "A"
Special mounting hardware for on-board ship use.

The PathWay® Model 4124 DB9 A/B Automatic Fallback Switch with Contact Control Remote Port, allows the user the capability of sharing a single port interface device connected to the Common port among two other devices connected to the A and B ports with remote access functionality. Remote Control access can be accomplished through the Contact Closure Remote Port.

When in automatic fallback mode the unit monitors data activity on port A. If activity is lost, the unit switches to position B. The Model 4124 will maintain its connection to port B until data activity is detected on port A, at which time the unit will automatically return to the A position. If no data is present on either port A or on port B, the unit will stay in the A position and continue to monitor for data. The user can override automatic fallback operation from the front panel or Remote Port and force the unit to operate as an A/B switch.

Features:
Ideal for fallback applications.
The switch ports are transparent to all data.
All pins of the DB9 interface are switched.
Automatic Fallback Mode operates based on data monitoring of pin 3 of the A port and automatic switching occurs after 3 seconds of data loss.
All switched signals are passed via latching copper contact relays that maintain their position and continuity in the event of a power loss.
Control of the switch position from a Contact Closure Remote Port.
Contact Closure allows the user to control switch position, lockout front panel operations and obtain switch status.
Front panel LEDs display switch position, the switch mode (automatic fallback or manual) as well as power status.
Rugged aluminum case provides EMI/RFI shielding.

Special mounting steel pass-through nuts mounted internally to bottom of enclosure for desktop mounting of on-board ship use.

Specifications:
PORT CONNECTORS: (2) DB9(F) connectors labeled A, and B,
(1) DB9(M) connector labeled Common.
FRONT PANEL CONTROL: (1) Pushbutton for local switch control.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE: (1) DB9(F) connector on rear panel accepts contact closure switch commands for Remote Control operation.
POWER: UL approved 115VAC, 60 Hz wall mount power module supplies 12 VDC, 500 mA to the unit.
DIMENSIONS: Desktop, 7.9" W x 2" H x 7.25" D.
WEIGHT: Approximately 2.8 lbs

Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

APPLICATION: Special mounting hardware for on-board ship use. The diagram illustrates a DB9 AB Switch sharing a single port device connected to the COMMON port among two other devices connected to the A and B ports. When in Automatic Fallback mode, it monitors data activity on the port A. The DB9 Remote accepts Contact Closure signals allowing control of the switch, lockout front panel operations, obtain switch status.

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1821

Model 9455 Dual Channel RJ45 Cat5e A/B Switch, Manual, Simultaneous Switching, Rackmount

The Model 9455 is a dual-channel RJ45 A/B Network Switch. Both channels switch to A or B simultaneously. Each of the two channels reroutes data from its Common port to its A or B port, depending on switch position.

Model 9455 2-Channel Switch Features:
Each cahnnel allows quick connection to any one of two devices from one COMMON device.
Rated for 10/100/1000 Base-T networks (Up to Cat 5e).
All 8 pins of the RJ45 interface are switched.
Transparent to data speed and format.
Simultaneously switches both channels via front-panel rotary switch.
High quality sealed switch with self-wiping precious metal contacts.
Eliminates the need to plug and unplug cables.
No external power is required.
Rackmount configuration.
Attractive anodized black box packaging provides EMI/RFI shielding.
Lifetime guarantee.
Custom length Cat5e cables available for your switch application.

Specifications:
PORT CONNECTORS: (6) RJ45 female, an A, B, and Common for each of the two channels.
FRONT PANEL CONTROL: (1) Rotary selector switch on front panel selects A or B for both channels, simultaneously.
POWER: No power required. Manually operated.
DIMENSIONS: 19"W x 1.75" (1U) W x 8.0" D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 2.0 lbs (0.9 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1816

Model 7424 RJ45 A/B/C/D Switch with Serial Remote Control Port

The PathWay® Model 7424 RJ45 Cat5 A/B/C/D Switch with Serial Remote Control, provides the user with local and remote control functionality. It allows the user to share a single RJ45 interface device connected to the COMMON port among four other devices connected to the "A", "B", "C", and "D" port. Remote access can be accomplished by RS232 commands sent via the Serial Remote Control port. Users can remotely monitor status, control switch functions, and lockout the front panel pushbuttons.

Features:
The switch ports are transparent to data format.
4 pins of the RJ45 interface are switched (pins 1, 2, 3, and 6).
All switched signals are passed via copper contact relays that maintain
their position and continuity in the event of a power loss.
Front panel pushbutton control or remote ASCII command access
through the RS232 serial port.
Front panel LED's display the current switch position and power status.
Remote Control Lockout of front panel pushbuttons.
Remote Control query of current switch position.
Standard configuration is desktop.

Specifications:
CONNECTORS: (5) RJ45(F) connectors labeled A, B, C, D, and COMMON.
FRONT PANEL CONTROLS: (4) Manual pushbuttons allow local switching.
DISPLAY: (4) Front Panel LED's display switch position and power status.
REMOTE: (1) DB9(F) port connector on rear panel accepts RS232 Serial
Data for Remote Control Operation.
POWER: UL approved 120 VAC, 60Hz wall mount power module
supplies 12VDC, 500mA to the unit.
DIMENSIONS: 16.75" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs. (2.04 kg)

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

RJ45 Cables Available from Stock!

All of ESL's products are available for export.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1817

Model 7385 DB-9 A/B/C/D Low Impedance Switch with Exclusive Remote Control, Desktop

Introduction
The PathWay® Model 7385 DB9 Interface A/B/C/D Switch provides switching in a compact, desktop unit. It allows the user the capability of sharing a single DB9 interface device connected to the Common port among four other devices connected to the A, B, C, and D ports.

There is no local or front panel switch control on the unit. The Model 7385 can ONLY be switched remotely from the DB9/female RS-232 serial interface remote port located on the rear of the unit. The front panel LED display indicates the switch position and unit power status.

Features:
- The resistance between the Common port pins and the corresponding current position pins is less than 0.8 ohms.
- The switch ports are transparent to data format.
- All nine (9) pins of the DB9 interface are switched.
- The Remote port accepts RS232 Serial data ASCII commands fro switch position control and monitoring. No local control of switch position.
- The unit maintains last set switch position in the event of a power loss and continues to pass data.
- Front panel LEDs display the current switch position and power status.
- Desktop configuration is standard.

- Ideal for "remote control only" applications. There is no local control on the Model 7385.

Specifications:
Port Connectors: (5) DB9(F) connectors labeled A, B, C, D, and Common.
Remote Control: (1) DB9(F) connector labeled Remote accepts RS232 serial data ASCII commands.
Display: (4) LED's labeled A, B, C, and D display switch position.
(1) LED labeled Power displays power status.
Power: UL approved wall mount 110/120VAC, 60Hz power module supplies 12 VAC, 500 mA to the Model 7385.
Dimensions: Desktop configuration 2.4" H x 8.0" W x 7.25" D.
Weight: Approximately 4.5 lbs.

Custom Length DB9 cables available!

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1818

Model 7288 DB-25 A/B/C/D Code Operated Switch, Desktop Case

The PathWay® Model 7288 DB25, Code Operated A/B/C/D Switch allows the user the capability of accessing four separate devices, ports A, B, C, and D, via connection through a device connected to the Common port of the switch. There are no local controls for switch operation on this network switch.

The switch position and lockout status can be changed through data stream on the common port. Switch position states and lockout status may be attained via the front panel LED display.

Features:
Pins 1-8 and 20 of the DB-25 interfaces are switched.
All DB-25 ports function as DCE ports.
Remote commands switch the unit and change lock state.
Front panel LEDs display the position and lock status.
The unit utilizes latching relays, maintains last set position on
power loss and continues to pass data.
Unit preset for customer specifications; no jumpers or dipswitches to set.
There are no local, front panel, switch controls on this 4-position switch.
Custom length DB25 cables available.
OPTION: WIDE RANGE POWER MODULE:
(Cat No 517277) CE and UL listed wall mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications. For more about this product, see Accessories tab.

Specifications:
PORT CONNECTORS: (5) DB25 (F) connectors labeled A, B, C, D, and COMMON.
FRONT PANEL CONTROL: None
DISPLAY: (4) Red Front panel LED's display switch position and power status.
(1) Green front panel LED displays the unit's lockout status.
REMOTE CONTROL: Remote Control operation is accomplished via coded
commands in the data stream of the COMMON port.
POWER: UL Approved 120VAC, 60Hz wall mount power module supplies
12 VDC, 500 mA to the unit.
DIMENSIONS: Desktop, 8.0" W x 7.25" D x 2.0" H.
WEIGHT: Approximately 2.8 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1831

The PathWay® Model 7209 BNC A/B Data Switch with RS422 Remote Control, Rackmount

Ideal for switching BNC connections over long distances.

The PathWay® Model 7209 BNC A/B Data Switch with Remote allows the user the capability of accessing two separate BNC ports via the common port. The switch may be controlled manually via a front panel push button or remotely from an RS422 interface serial port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the remote RS-422 serial port.

Features:
Allows quick connection to any one of two BNC interface devices from one COMMON device.
Eliminates the need to plug and unplug cables.
Center pin and shell switched.
(3) Isolated BNC port connectors on rear panel.
Center pin and shell switched.
The switch ports are transparent to all data.
Front panel LEDs display the current switch position and power status.
Front panel pushbutton control can be locked out remotely.
Front panel pushbutton control or Remote RS-422 ASCII Command
access through the serial port.
The unit maintains last set position on power loss and continues
to pass data.
Rugged aluminum enclosure provides EMI/RFI shielding.
Custom length RJ-58 and Thinnet RJ58 coaxial cables available.
Municipalities, schools, government: This product is on GSA Schedule!

Specifications:
PORT CONNECTORS: (3) BNC (F) connectors labeled A, B,
and COMMON.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) DB9 (F) Remote connector on rear panel
accepts Serial RS422 ASCII commands.
POWER: UL approved 120VAC, 60 Hz wall mount power module
supplies 12 VDC, 500mA to the unit.
DIMENSIONS: 19.0" W x 8.0" D x 1.75" H (1U rack height) (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs. (2.0 Kg)

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V.

OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1830

Model 7231 DB25/X.21 BIS Interface A/B Switch with Serial Remote Control

The PathWay® Model 7231 2-position switch allows the user the capability of sharing a DB25/X.21 BIS Interface device connected to the Common port connector between two other X.21 BIS Interface devices connected to the A and B ports.

The switch may be controlled locally by manually operating the front panel pushbutton or remotely from a DB9 female serial interface Remote port located on the rear of the unit. Remote control includes the ability to set a delay time between pushing the front panel pushbutton and the actual changing of the switch position.

Manual switching is achieved by simply pressing the front panel pushbutton. The switch will change to the newly selected position as indicated by the front panel LED's. The user may set a Duration Time which will require the operator to hold down the pushbutton for a period of time before the actual change of switch position occurs. If the pushbutton is released prior to the Duration Time, the unit will not change switch position.

Features:
Allows quick connection to any one of two DB25/X.21 BIS Interface
devices from one COMMON device.
Switches all 25 pins of the DB25 interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Local control via front-panel pushbutton.
Remote control port allows off-site monitoring and switch management.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch
position control and monitoring.
Front panel pushbutton control can be locked out remotely.
Remote commands to set pushbutton-position change delay value.
Front panel LED's display switch position and power status.
Retains last switch position in the event of a power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
A wide range UL approved power module is supplied with the unit
(100VAC/240VAC, 50Hz/60Hz) to cover North American and European applications.
Custom length DB25 cables available for your switch installation.

Specifications:
PORT CONNECTORS: (3) DB25 (F) connectors labeled A, B, and COMMON.
FRONT PANEL CONTROL: (1) Manual pushbutton allows for local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) DB9(F) connector on rear panel accepts RS232
Serial Data for remote control operation.
POWER: UL approved 100VAC / 240 VAC, 50Hz/60Hz wall mount power module
supplies 12 VDC, 500mA to the unit. This is a wide range power module to
cover North American and European Applications.
DIMENSIONS: Desktop, 7.75" W x 7.0" D x 2.75" H.
WEIGHT: Approximately 2.5 lbs. (1.1 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1833

Model 7141 1-Channel Normal/Bypass Switch, E1 Interface with Remote Control

Allows New Equipment to be Added-To or Bypassed From E1 Data Links.
One-Channel System Switch: Model 7141

The PathWay® Model 7141 One-Channel Normal/Bypass Switch, E1 Interface with Remote allows the user the capability of accessing four separate devices and setting the group of devices to a pre-determined configuration based on whether the channel is set to Normal or Bypass.

Position may be controlled manually via a front panel push button or remotely from an RS-232 serial port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the remote RS-232 serial port (DB9) located on the rear of the unit.

The Model 7141 dimensions are 19"W x 8"D x 1.75"H with rack mounting and it weighs approximately 4.5 lbs. All switch ports are RJ48 female compatible. All 8 pins of the RJ48 are switched.

Features:
Rackmount Configuration.
Local or Remote Control.
LED's Display Switch Position.
Automatic Switch to Bypass, if data activity is lost.
Automatic Switch to Bypass mode, if power is lost.
E1 ports are RJ-48 Connectors located on the rear panel.
UL approved wall mount power module supplied with unit.
Power module accommodates wide voltage range ideal for international applications.
A 6-channel unit is available, Model 7146, Cat. 307146.
A 3-channel unit is available, Model 7143, Cat. 307143.

Specifications:
Port Connectors: (4) RJ48 female connectors labeled 1, 2, 3, and 4.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (2) Front panel LED's display switch position and power status.
Remote: (1) DB9 (F) connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
Power: UL approved 100 - 240 VAC, 47 - 63 Hz wall mount power module supplies 12 VDC, 2.0A power.
Dimensions: Rackmount 19.0" W x 1.75" H x 8.0" D.
Weight: Approximately 4.5 lbs

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Click here or on GSA icon for details.

Power Module, Cat No. 516265
is supplied with All Normal / Bypass Switch Models.
The UL Approved wall mount power module plugs into a 100-240 VAC / 47-63 Hz wall receptacle and supplies the Bypass Switch with 12 VDC / 2.0A power.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=247

Model 7143 3-Channel Normal/Bypass Switch, E1 Interface with Remote Control

Allows New Equipment to be Added-To or Bypassed From E1 Data Links.
Three-Channel System Switch: Model 7143
The PathWay® Model 7143 network switch has three Normal/Bypass network switch functions. E1 Interface with Remote allows the user the capability of accessing four separate devices per channel and setting each group of devices to a pre-determined configuration based on whether the channel is set to Normal or Bypass.

Each switch may be controlled manually via a front panel push button or remotely from an RS-232 serial port located on the rear of the unit. Switch position status may be attained via the front panel LED display or the remote RS-232 serial port (DB9) located on the rear of the unit.

The Model 7143 is packaged in a rackmount enclosure with dimensions of 19" W x 8" D x 1.75"H and it weighs approximately 4.5 lbs. All switch ports are RJ48 compatible. All 8 pins of the RJ48 are switched.

Features:
Rackmount Configuration.
Local or Remote Control.
LED's Display Switch Position.
Automatic Switch to Bypass, if data activity is lost.
Automatic Switch to Bypass mode, if power is lost.
E1 ports are RJ-48 Connectors located on the rear panel.
Model 7143 is a 3-Channel unit.
Channels can be switched independently.
UL approved wallmount power module is supplied with the unit.
Power module accommodates wide voltage range.
A 6-channel unit is available, Model 7146, Cat. 307146.
A 1-channel unit is available, Model 7141, Cat. 307141

Specifications:
Port Connectors: (12) RJ48 female connectors (Four connectors labeled 1, 2, 3, 4, for each of the three channels).
Front Panel Controls: (3) Manual pushbuttons allow local switching.
Display: (6) Front panel LED's display switch position and power status.
Remote: (1) DB9 (F) connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
Power: UL approved 100 - 240 VAC, 47 - 63 Hz wall mount power module supplies 12 VDC, 2.0A power.
Dimensions: Rackmount 19.0" W x 1.75" H x 8.0" D.
Weight: Approximately 4.5 lbs

This high-quality network switch is available to city, state, and federal government purchasers at a discounted price and favorable payment and shipping terms via GSA Schedule GS-35F-0286V. Click here or on GSA icon for details.

Power Module, Cat No. 516265
is supplied with All Normal / Bypass Switch Models.
The UL Approved wall mount power module plugs into a 100-240 VAC / 47-63 Hz wall receptacle and supplies the Bypass Switch with 12 VDC / 2.0A power.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=246

Model 9456 Six Channel RJ45 A/B Switch, T1, 1U Height,
Rackmount

Switches Six Primary Rate Interface (PRI) Input Channels to Output Devices "A" or "B"

The Model 9456 Six-Channel RJ45 A/B Data Switch allows devices connected to COMMON port of each channel to access the A or B port of each channel. All channels are switched simultaneously. The Model 9456 network switch is enclosed in a standard 1U rackmount casing. Four pins of each RJ45 T1 channels are switched (paired, pins 1, 2 and pins 4, 5).

Features:
Manually switches all six PRI channels simultaneously between switch positions A and B via one knob located on the front panel.
Each channel consists of one A, B, and Common port.
All (18) RJ45 Female ports are located on the rear panel.
(6) Common
(6) "A" ports
(6) "B" ports
Four pins of each RJ45 T1 channel are switched (paired, 1 & 2, and 4 & 5).
High quality sealed switch mechanism with self-wiping contacts.
No power required. The switch is operated manually.
Switch case is rugged all-aluminum enclosure for EMI/RFI protection.
Cables for interconnection are available from stock.

Specifications:
Port Connectors: (18) RJ45 (F) labeled A1 to A6, B1 to B6, and COMMON 1 to COMMON 6.
Front Panel Control: (1) Manual rotary switch allows local switching of all six channels to A or all six channels to B.
Power: No power required.
Dimensions: 19" W x 1.75" H x 8" D.
Weight: 3 lbs.

Specifications:
Port Connectors: (18) RJ45 (F) labeled A1 to A6, B1 to B6, and Common 1 to Common 6.
Front Panel Control: (1) Manual rotary switch allows local switching of all six channels to A or all six channels to B.
Power: No power required.
Dimensions: 19" W x 1.75" H x 8" D.
Weight: 3 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1844

Model 7268 Single Channel HD15 A/B Switch with Serial Remote Control Port

The PathWay® Model 7268 Single Channel HD15 Interface AB Switch provides single channel switching in a low profile, 19-inch 1U rack unit. The Model 7268 allows the user the capability of sharing a single HD15 interface device connected to the Common port among two other devices connected to the A and B ports.

This remotely controllable switch may be controlled locally by manually operating the front panel push button(s) or remotely from the DB9/male serial interface Control port located on the rear of the unit. The front panel LED display indicates the switch position and power unit status.

Features:
Permits data to pass through on all pins of the HD15 connector interface:
From A to COM in the A position
From B to COM in the B position
Connectors A, B, COM are HD15/F connectors.
Switches all 15 pins simultaneously.
Latching relays maintain connection and switch position even during power failure.
Remote control via DB9/M RS232 serial port on the rear panel.

OPERATION: Switched Ports / Interface: The switched HD15/Female ports (A, B, and COMMON) are transparent to all data. The ports may be switched via the front panel push button or the remote control port on the rear of the unit.

Switch Control: The switch position may be controlled manually from front panel push button controls or remotely from the DB9/male Control connector located on the rear of the unit.
Local Switching is achieved by simply pressing the front panel push button and the switch will change to the newly selected position as indicated by the front panel LED's.
Remote Switching of the unit is done through the Control port on the rear panel. The Control port provides switch control based on an ASCII character command set sent via RS-232 interface to the Control port connector. The ASCII control character "^ A" (where "^", indicates a control character obtained by depressing the [A] key and the [CTRL] key simultaneously) causes the unit to switch to the "A" position. The ASCII control character "^ B" (obtained by depressing the [B] key and the [CTRL] key simultaneously) causes the unit to switch to the "B" position.

Specifications:
Port Connectors: (3) HD15 (F) connectors labeled A, B, and COMMON.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (2) Front panel LED's display switch position and power status.
Remote Control: (1) DB-9 male connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
Power: UL approved 110 / 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: Desktop, 19.0' W x 8.0" D x 1.75" H.
Weight: Approximately 4.0 lbs

Be sure to order your HD15 cables along with the switch. Custom length available.

Operation: Switched Ports / Interface: The switched HD15/Female ports (A, B, and COMMON) are transparent to all data. The ports may be switched via the front panel push button or the remote control port on the rear of the unit.

Switch Control: The switch position may be controlled manually from front panel push button controls or remotely from the DB9/male Control connector located on the rear of the unit.
Local Switching is achieved by simply pressing the front panel push button and the switch will change to the newly selected position as indicated by the front panel LED's.
Remote Switching of the unit is done through the Control port on the rear panel. The Control port provides switch control based on an ASCII character command set sent via RS232 interface to the Control port connector. The ASCII control character ^A (where ^ indicates a control character obtained by depressing the [A] key and the [CTRL] key simultaneously) causes the unit to switch to the A position. The ASCII control character ^B (obtained by depressing the [B] key and the [CTRL] key simultaneously) causes the unit to swit

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1843

The PathWay® Model 4143 RS232 DB25 Automatic Fallback AB Switch

The PathWay® Model 4143 RS232 DB25 Automatic Fallback AB Switch allows the user the capability of sharing a single DB25 interface device connected to the COMMON port among two other devices connected to the A and B ports with local and remote access functionality. Remote access of the Automatic Fallback Switch can be accomplished using Pin 9 of the DB25 COMMON port.

Features:
The switch ports are transparent to all data.
All 25 pins of the DB25 interface are switched.
All switched signals are passed via latching copper contact relays
that maintain their position and continuity even in the event of a
power loss or failure.
Control of the switch position using Pin 9 of the DB25 Common port
or alternatively, the front panel pushbutton.
A transition from 5 VDC to 0 VDC on Pin 9 of the DB25 Common port triggers the unit to switch positions.
Custom length DB25 cables available.

Specifications:
PORT CONNECTORS: (3) DB25 (F) connectors labeled A, B, and Common.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LED's display switch position and power status.
REMOTE CONTROL: Transition signals on pin 9 of the COMMON port DB25 will trigger a change to the switch position.
POWER: UL approved 110 / 120 VAC, 60 Hz wall mount power module supplies 12 VAC, 500mA to the unit.
DIMENSIONS: Desktop 7.9" W x 7.25" D x 2.0" H.
WEIGHT: Approximately 2.8 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1842

Model 7359 Tri-Channel RJ45 Cat 5 A/B Switch, with Remote Control via Contact Closure

Three independently controlled A/B Switches, certified for CAT 5 compliance, all in a slim 1U high package!

The PathWay® Model 7359 RJ45 Cat5 A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B via connection through a device connected to the Common port for each of the switch's three channels. The Model 7359 dimensions are 19" W x 1.75" H x 8" D. It weighs approximately 4.5 lbs.

The network switch may be controlled manually via front panel pushbuttons or remotely from a contact closure remote port located on the rear of the unit.
Switch position states may be attained via the front panel LED displays.

Features:
The switch ports are transparent to all data.
All 8 pins of the RJ45 interface are switched.
Each channel is an individual switch that is independently controlled.
Remote switching via contact closure for each channel individually.
Each channel maintains last set position on power loss and continues to pass data.
On power restore, the switch changes to the position indicated by the remote port.
Front panel LEDs display the current switch position of each channel of the switch and the switch power status.

Specifications:
Port Connectors: (9) RJ45 female connectors total. A, B, and COMMON for each of three channels.
Front Panel Controls: (3) Manual pushbuttons allow local switching.
Display: (6) Front panel LED's display switch position and power status.
Remote: (1) DB9 female connector on rear panel accepts contact closure switch commands for Remote Control operation.
Power: UL approved 110VAC-220VAC, 50Hz - 60Hz wide range wall mount power module supplies 12 VDC, 1.5A to the unit.
Dimensions: Rackmount configuration 19.0" W x 1.75" H x 8.0" D.
Weight: Approximately 4.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1846

Model 7200 DB-9 A/B Switch, with Remote Control, Desktop

Introduction:
The PathWay® Model 7200 DB-9 A/B Switch with Remote Control allows the user the capability of accessing two separate devices, ports A & B, via connection through a device connected to the Common port of the switch.

The switch may be controlled manually via the front panel pushbutton or remotely from an RS232 serial port located on the rear of the unit.

Switch position state may be attained via the front panel LED display or the remote RS232 serial port (DB9) located on the rear of the unit.

Features:
- A, B, and Common connectors are DB9.
- All 9 interface pins are switched.
- The switch ports are transparent to all data.
- Front panel pushbutton control or Remote ASCII RS232 Serial Data Control via the serial port.
- Front panel LEDs display the switch position and power status.
- Front panel pushbutton control can be locked out remotely.
- The unit maintains last set position on power loss and continues to pass data.

OPTION: WIDE RANGE POWER MODULE:
(Cat. No. 517277) 100 VAC / 240 VAC, 50Hz/60Hz in place of standard 115 VAC power module.

Specifications:
Port Connectors: (3) DB9 (F) connectors labeled A, B, and Common.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (2) Front panel LED's display switch position and power status.
Remote Control: (1) DB9 Female connector on rear panel accepts ASCII RS232 Serial Data for remote control operation.
Power: UL approved 110 / 120 VAC, 60 Hz wall mount power module supplies 12 VAC, 500mA to the unit. An international wide range power module is available as an option.
Dimensions: Desktop, 7.75" W x 7.0" D x 2.75" H.
Weight: Approximately 2.8 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1847

Model 7009 RJ45 Cat 5e A/B/OFF-Line Switch Modules with Contact Closure Remote Port
- 100 Base-T, Cat 5e Compliant, Modular Expandable System!

Each Model 7009 A/B/Offline Switch Module allows the user to connect a single RJ45 interfaced device to be connected to either of two RJ45 interfaced devices, or to be isolated from both of them by being switched to an "Offline" position. Up to eight of the switch modules may be slid into the Model 9030 Rack which also supplies necessary power. The Model 9030 Rack has dimensions 19.0" W x 5.25" H x 7" D.

The Model 7009 A/B/OFF-LINE Switch Module allows the user to connect a single RJ45 interfaced device to be connected to either of two RJ45 interfaced devices, or to be isolated from both of them by being switched to an "OffLine" position. Up to eight of the switch modules may be slid into the Model 9030 Rack which also supplies necessary power. The Model 9030 Rack has dimensions 19.0" W x 5.25" H x 7" D.

The Model 7009 RJ45 A/B/Off-line Switch Module can be controlled locally by pushbutton or remotely by contact closure. The unit meets CAT 5e signal integrity specifications. A pushbutton on the front panel allows the user to locally control the switch position. A contact control remote port facilitates remote switching. When the proper contacts are made on the remote port, the unit will switch to the prescribed port, either A, B, or Offline. In either local or remote mode of operation, LED indicators display the switch position and power status.

Model 7009 Specifications
Remotely Controllable RJ45 A/B Switch
Module Size: 2" W x 5" H x 7" D
Power: Requires 12 VAC, .5A
Display: (2) Port Status Tri-State LED's on front panel.
Control: (1) Pushbutton on front panel selects A, B, or Off-Line.
Remote: (1) RJ45(F) port accepts contact closure for Remote Control.
Connectors: (3) RJ-45 (F) on rear panel labeled A, B, and COM.
Leads Supported: All 8 pins switched.

Model 9030 Rack with Power Supply and Cabling
Features of Model 9030 Rack with Power Supply and Cabling:
- Model 9030 Rack includes a power distribution module, a wall mount power supply which provides power to all the switches in the rack, and power bus cable which distributes power to all eight modules.
- Rack Size: 19" W x 5.25" H x 7" D.
- The Model 9030 Rack can accommodate up to eight switch modules.
- Filler panels are available to cover unused module slots.
(Request Catalog# 305983 for a 2 inch filler panel)

Features:
- The switch ports are transparent to all data.
- All eight (8) pins of the RJ45 interface are switched.
- All switched signals are passed via copper contact relays that maintain
their position and continuity even in the event of a power loss or failure.
- Front panel pushbutton control or remote contact control via the remote
port.
- Front panel LED's display the current switch position and flash while the
user is in the process of changing the switch.
- The Model 7009 is a modular, rackmount switch and is sold in conjunction
with the Model 9030 rack.
- The Model 9030 rack can accommodate up to eight Model 7009 Switch
Modules.
- Model 9030 Rack includes a power supply module, which is responsible for
powering all the switches in the rack. A power bus cable (included)
distributes the power among the modules.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1848

Model 7289 Dual Channel DB37 A/B Switch with Telnet and GUI Interface to 10/100-Base-T Remote Control

The PathWay® Model 7289 Dual Channel DB37 A/B Switch with Telnet and GUI Interface to 10/100-Base-T Remote Control allows the user the capability of sharing a single port interface device connected to the Common port among two other devices connected to the A and B ports for each channel. Remote access can be accomplished using an Ethernet 10/100-Base-T connection and either Telnet commands or graphical user interface.

Features:
- Supports (2) channels of A/B switch function.
- The switch ports are transparent to all data.
- Simultaneously switch both channels between positions A and B.
- IP Addressable. Remote switching via 10/100-Base-T RJ45 Ethernet port.
Remote connection for monitoring and control for up to (4) simultaneous
TCP/IP connections. Communicate with switch via TELNET session.
- Remote GUI interface allows user to control switch position, "Managed"
state, and "Managed" state timeout.
- Remote Control allows user to lockout the front panel via the "Managed"
state.
- Local switching via two front panel pushbuttons; one for A and one for B.
- Status LED's on the front panel indicate the switch position, "Managed"
state, and power status.
- Total of 25 signals are supported per channel.
- 24 pins of the DB37 interface are switched: pins 6 through 10, 12, through
19, 25 through 28, and 30 through 36. In addition, ground pins 2, 3, 4, 5,
22, 23, and 24 are tied together and switched over a single relay pole then
broken out to their respective pins.
- Switch maintains position and continues to pass data during power loss.
- Switch powers up in last known position.
- A wide range power module is supplied as standard with this unit. Ideal for
international applications.

Specifications:
Port Connectors:
(4) DB37 male connectors, channels one and two, ports A and B.
(2) DB37 female connectors, channels one and two, Common ports.
(1) RJ45 female Remote Ethernet port.
Front Panel Controls: (2) Manual pushbuttons allow local switching.
Display: (5) Front panel LED's display switch status, "Managed" state, and power status.
Remote:
(1) RJ45 female connector on rear panel accepts Ethernet 10/100-Base-T LAN access and either TELNET commands or GUI Interface for Remote Control operation.
Power: Wide Range CE and UL listed wall mount power module (Cat. No. 517277) 100VAC/240VAC, 50Hz/60Hz. Ideal for international applications.
Dimensions: Rackmount 19.0" W x 1.75" H x 10.0" D.
Weight: Approximately 4.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1860

Model 7243 Triple Channel Multi Interface A/B Switch with Serial Remote Control Port

The Model 7243 Triple Channel Multi Interface A/B Switch provides A/B switching in a low profile, 19-inch 1U rack unit. The multi interface is made up of (1) DB37 and (2) DB9 port connectors.

The Model 7243 allows the user the capability of sharing a set of (1) DB37 and (2) DB9 interface devices connected to the Common port connectors among two other sets of devices connected to the A and B ports.

The switch may be controlled locally by manually operating the front panel pushbutton(s) or remotely from the DB9/female serial interface Control port located on the rear of the unit. The front panel LED display indicates the switch position and unit power status. All connectors of port, (1) DB37 and (2) DB9, are switched simultaneously. Pins 1 through 37 of the DB37 connector, and pins 2, 3, & 5 of each of the DB9 connectors are switched; therefore a total of (43) signals are switched simultaneously. Up to 50 user specified pins can be supported by custom configuration, specified at time of order.

Features:
- Three channels of A/B Switching, (1) Channel DB37, (2) Channels of DB9.
- All A/B port connectors, (2) DB37 & (4) DB9 are female gender.
- All Common port connectors (1) DB37 & (2) DB9 are male gender.
- A total of 50 pins can be supported. User to define pins supported on each interface channel at time of order if other than standard is required.
- All three channels switched simultaneously.
- Each channel is transparent to data and speed.
- Switch position and connection through the switch is maintained during power loss.
- Local switching done from a single pushbutton on the front panel.
- Remote switching accomplished over DB9/RS232 Serial Interface Remote port on the rear panel of the unit.
- Simple Remote commands include change switch position, query switch position, lockout front panel control of the unit.
- 19" standard rackmount enclosure, 8" deep, 1U rack height.

Specifications:
Port Connectors:
Channel 1: (3) DB37 connectors labeled A, B, and Common.
Channel 2: (3) DB9 connectors labeled A, B, and Common.
Channel 3: (3) DB9 connectors labeled A, B, and Common.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (2) Front panel LED's display switch status, and power status.
Remote: (1) DB9 female connector on rear panel accepts RS232 Serial Data for Remote Control operation.
Power: UL approved 115 VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: Rackmount 19.0" W x 1.75" H x 8.0" D.
Weight: Approximately 3.0 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1862

Model 7211 Dual Channel DB9 A/B Switch with Remote Contact Control Port

The Model 7211 Dual Channel DB9 A/B Switch allows a device connected to either channel Common port access to its respective A or B port. The Model 7211 Dual Channel unit is compactly enclosed in a low profile, 19-inch 1U rack unit. The unit also allows for both ports to be switched simultaneously.

The switch may be controlled locally by manually operating the front panel push button or remotely from the DB9 Remote Control port located on the rear of the unit. The DB9 Remote port provides control by dry contact open/closure logic.

Features:
- Supports (2) independent channels of A/B switch function.
- All 9 pins of each channel are switched.
- Local switching via (2) front panel pushbuttons.
- (4) Status LED's, A/B, on the front panel indicate the switch position & power status of each channel.
- A single DB9 female Remote port accept a straight through DB9 male/male cable to connect to the Model 7211 Remote Unit.
- Switch maintains position and signal pathway even if power to the unit is lost.
- Monitor pins supply the voltage to drive LED indicators at remote location with 5VDC.

Specifications:
Port Connectors:
Channel 1: (3) DB9/F connectors labeled A, B, and Common.
Channel 2: (3) DB9/F connectors labeled A, B, and Common.
Front Panel Controls: (2) Manual pushbuttons allow local switching of each channel.
Display: (4) Front panel LED's display switch status, and power status.
Remote: (1) DB9 female connector on rear panel accepts contact closure transition signals for Remote Control operation.
Power: UL approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: Rackmount 19.0" W x 1.75." H x 8.0" D.
Weight: Approximately 4.5 lbs.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1863

Model 7261 RS232 / RS530 A/B/C/D Switch with RS232 & Contact Closure Remote Control Port

The PathWay® Model 7261 RS232/RS530 4-Position Switch allows a device connected to its Common port access to any of four other similar interface devices connected to ports A, B, C, and D all in a low profile, 19-inch 1U rack unit.

This network switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB9 Control port located on the rear of the unit. The DB9 Remote port provides control either by RS232 serial commands, or by dry contact open/closure logic. The front panel LED display indicates the switch position and unit power status.

OPERATION:
The switched DB25/Female ports (A, B, C, D, and Common) are transparent to all data. The ports may be switched via the front panel pushbutton or remote control port on the rear of the unit.

Features:
All 25 pins of the DB25 interface are switched.
Front panel pushbutton or local control of switch position.
Control port for remote control of switch position and front panel lockout.
LED's display switch position, front panel lockout and power status.
The unit utilizes latching relays, maintains last set position on power loss and continues to pass data.
Custom length DB25 cables available.

Specifications:
Port Connectors: (5) DB25 Female connectors labeled A, B, C, D and COMMON.
Front Panel Control: (1) Manual pushbutton allows local switching.
Display: (4) Front panel LED's display switch position and power status.
Remote Control: (1) DB9 Female connector on rear panel accepts Contact Closure or RS232 Serial Data for remote control operation.
Power: UL approved 120 VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
Dimensions: 19.0" W x 1.75" H x 8.0" D.
Weight: Approximately 3.5 lbs

OPTION: WIDE RANGE POWER MODULE
(Cat No 517277) CE and UL listed table mount power module, 100 VAC / 240 VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1952

Model 9256 Dual Channel RS530 DB25 A/B Switch

High Quality Manual Data Network Switches Increase the Reliability of Your Network!

The Model 9256 Dual Channel RS-530 DB25 A/B Switch, allows the user two independent channels of A/B switch function. The A/B function permits access by either of two devices connected to ports A and B, to a single Common port.

The Model 9256 DB25 Switch is a manual switch and requires no power. The Model 9256 is configured to mount in a standard 19 inch equipment rack within 1U of rack space. The dimensions of the unit are 19" W x 1.75" H x 8" D.

Features:
Independently switch each of the two channels manually via knobs located on the front panel.
All six DB25 female ports are located on the rear panel:
(2) A ports
(2) B ports
(2) Common ports
All 25 leads switched
Supports the complete RS530 interface.
Rackmount style chassis, 19" Wide x 1.75" High x 8" Deep
Chassis extrusions (front, rear, sides and ears) are 6063T6 Aluminum, black anodized. The top and bottom covers are vinyl-clad, cold-rolled steel.
Custom length DB25 cables are available.

Specifications:
PORT CONNECTORS: (6) DB25(F) connectors for A, B, and Common of channels 1 and 2.
FRONT PANEL CONTROLS: (2) Rotary Switches on front panel, one knob per channel to switch each channel independently.
PINS SWITCHED: All 25 pins switched.
POWER: No power required.
DIMENSIONS: Rackmount 19.0" W x 1.75" H x 8.0" D. (1U rack height)
(48.3 x 4.4 x 25.4 cm)
WEIGHT: Approximately 4.5 lbs. (2.0 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1980

Model 8446 Quad-Channel RJ45/BNC A/B Switch, Manual Operation

Introduction
The Model 8446 Quad-Channel RJ45/BNC A/B Switch enables access to two devices per each of its four channels. Channel 1 allows access to RJ45 devices 1-A or 1-B. Channel 2 allows access to RJ45 devices 2-A or 2-B. Channel 3 allows access to BNC devices 3-A or 3-B. Channel 4 allows access to BNC devices 4-A or 4-B. All channels are switched simultaneously. The unit supports all 8 pins of the RJ45 Cat5e interfaces, and supports both the center conductor and shield of the BNC interfaces.

Features:
- Simultaneously switches two RJ45 Channels and two BNC channels locally via a knob located on the front panel.
- RJ45 channels are tested for Cat5e compliance.
- Leads switched: All (8) RJ45 pins, plus BNC center conductor and shield.
- All ports located on the rear panel: (6) RJ45 female and (6) BNC female.
- Packaged in a rugged aluminum enclosure for EMI/RFI protection.
- Chassis size approximately 8" W x 2.25 H x 7.25" D
- Four threaded screw holes located on the bottom panel.
- Switching is manually operated. Requires no power.
- Custom length cables are available.

Specifications:
Port Connectors:
(6) RJ45 (F), Category 5e connectors on rear panel.
(6) BNC (F) Connectors on rear panel.
Controls:
(1) Rotary Switch on front panel selects A or B.
Pins Switched:
RJ45: All 8 pins Switched.
BNC: Center Conductor and Shield
Power: No power required.
Enclosure: Shielded Aluminum Enclosure.
Dimensions: 8"W x 7.25"D x 2.25"H
Weight: Approximately 2.5 lbs

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1981

The PathWay® Model 7269V DB9 Interface A/B Network Switch allows the user the capability of sharing a single DB9 interface device connected to the Common port among two other devices connected to the A and B ports. The A, B, and COM ports are configured to support Tandberg Camera / Codec video conferencing connections.

The switch may be controlled locally by manually operating the front panel pushbutton or remotely from the DB9/female serial interface Control port located on the rear of the unit. Switch position states may be attained locally via the front panel LED display or remotely using RS232 serial data commands.

Features:
The switch ports are transparent to all data.
All pins of the DB9 interface are switched.
Pins 1 and 6 use Cat6 cable material.
Pins 4 and 5 support 12VDC, 1.5A.
All other pins support serial data communications.
Local position control using the front panel pushbutton.
Serial Remote Control to switch the position of the Model 7269V,
lock and unlock the front panel and query its status.
The Model 7269V DB9 Switch maintains position and continues
to pass data during power loss.
Front panel LED's display the current switch position and the
switch power status.
Option: Wide Range Power Supply: (Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC, power module. Ideal for international applications.

Specifications:
PORT CONNECTORS: (3) DB9 female connectors labeled A, B and COMMON.
FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching.
DISPLAY: (2) Front panel LEDs display switch position and power status.
REMOTE: (1) DB9 female connector on rear panel accepts ASCII RS232
Serial Data forRemote Control operation.
POWER: UL approved 120 VAC, 60 Hz, wall mount power module supplies
12VDC, 500mA to the unit.
DIMENSIONS: Rackmount configuration 19.0" W x 1.75" H x 8" D.
(48.3 x 4.4 x 20.3 cm)
WEIGHT: Approximately 4.5 lbs. (2.0 kg)
Specifications USB to DB9 Serial Converter Cable Available! If only USB ports are available on the computer or if a USB port is chosen to be used for any reason, a USB to DB9 serial converter cable will be needed. This cable can be provided by ESL under part number 514372.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=1993

Model 7294 16-Channel Cat5 RJ45 A/B Switch with Ethernet and RS232 Remote Control

The PathWay® Model 7294 16-Channel RJ45 Cat5 A/B Network Switch with Ethernet and RS232 Remote allows the user the capability of sharing a single port interface device connected to the Common port among two other devices connected to the A and B ports for each channel with remote access functionality. Remote control access can be accomplished using an Ethernet 10/100 Base-T connection and either Telnet commands or Graphical User Interface through the RJ45 Remote port. Alternatively, remote control can be accomplished using RS232 serial commands through the DB9 port.

Features
All sixteen channels are switched simultaneously.
All 8 pins of the RJ45 interface are switched.
The switch ports are transparent to all data.
Front panel pushbutton control.
Front panel LED's display current position and power status.
RS232 Serial data Remote control to query status, change position,
and control front panel lockout.
Remote control of the switch position from a 10/100Base-T LAN Ethernet environment.
Remote control Telnet command interface or Graphical User Interface that allows the user to control switch position, lockout front panel operations and obtain switch status.
Switch maintains position on power loss and continues to pass data.

Specifications
PORT CONNECTORS: (48) RJ45 female connectors labeled 1-16 in each
of the groups A, B, and COMMON.
FRONT PANEL CONTROL: (1) Manual pushbutton allows for local switching.
DISPLAY: (2) Front panel LEDs display switch position and power status.
REMOTE CONTROL: (1) RJ45 female connector on rear panel accepts 10/100Base-T LAN access Ethernet for Remote control operation. A second Remote connector, DB9(F) accepts ASCII RS232 serial data for Remote control operation.
POWER: Requires user supplied 48VDC, 500 mA to operate.
DIMENSIONS: 19.0" W x 3.5" H x 12.0" D (48.3 x 8.9 x 30.5 cm)
WEIGHT: Approximately 10.0 lbs (4.5 kg)

Don't forget to order RJ-45 Cat 5 patchchords. Custom lengths and many colors are available. Electro Standards can supply all of your Network Cable requirements.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2051

The Model 8461 Network Switch is comprised of nine individually controlled, manually operated, DB15 Connect/Disconnect switches. When in CONNECT position, that individual channel input is completely connected to its respective channel output. When in DISCONNECT position, that individual channel input is completely disconnected from its respective channel output.

Model 8461 9-Channel Switch Features:
Output Connectors (female): M24308/1-2F
Input Connectors (male): M24308/3-2F
Jackposts: M24308/26
Rotary Switch: Grayhill p/n 09YY50111, built to the same drawing as Series 09 for MIL-DTL-3786/13 Type SR13E45B1MPCL, but with different system plating
Dielectric Withstanding Voltage: Mil-STD-202F, Method 301
Insulation Resistance: MIL-STD-202F, Method 302
Workmanship is in accordance with MIL-HDBK-454, Guideline 9
Letter of compliance certification.
Shock Compliance: MIL-STD-810E, Method 516.4,
Procedure 1(1/2 sine30g x 20 millisec)
Vibration Compliance: MIL-STD-810E, Method 514.4, Category 1,
Procedure 1 (2 hours per axis)
Low pressure (Altitude) Compliance: Altitude 5000 ft.
MIL-STD-810E, Method 500.3, Procedure 1.
Humidity: MIL-STD-810F, Method 507.4
Independently switch each of 9 channels via knobs on front panel.
Switches pins 2,3,6,7,8,11,12,13, and 14. Pin 1 of each port is bussed through.
High quality sealed switch with self-wiping precious metal contacts.
No external power required.
Transparent to data speed and format.
Manual operation via front panel rotary switches.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB15 cables available for your switch installation.

Specifications:
PORT CONNECTORS:
(9) DB15 (M) Input connectors.
(9) DB15 (F) Output connectors.
FRONT PANEL CONTROLS: (9) rotary switches allow local switching.
POWER: No power required. Manually operated.
DIMENSIONS: Desktop Configuration: 16.73" W x 3.47" H x 6.0" D.
(42.5 x 8.8 x 15.2 cm)
WEIGHT: Approximately 6 lbs. (2.7 Kg)
APPLICATION: Individually controlled 9-Channel DB15 Connect / Disconnect switch. Utilizes MIL components and designed to support rugged MIL applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2027

The PathWay® Model 7208-CC DB15 Interface A/B/C/D Switch with Remote Control Port

The PathWay® Model 7208-CC DB15 Interface A/B/C/D Switch provides switching in a compact desktop unit. The Model 7208-CC network switch allows the user to share a single DB15 interface device connected to the Common port among four other devices connected to A, B, C, and D ports.

There is no local or front panel switch controls on this network switch. The Model 7208-CC can ONLY be switched remotely from the HD-15 female Contact Closure Control port located on the rear panel. The front panel LED display indicates the switch position and unit power status.

The switched DB15 / female ports (A, B, C, D and COMMON) are transparent to all data. All 15 signals of the DB15 connector interface are switched.

Features:
Allows quick connection to any one of four devices from one COMMON device.
A HD15 / female REMOTE port allows remote control of unit based on Contact Closure transition signals.
Remote port allows change of position and query of position
All DB15 leads are switched.
Transparent to data speed and format.
Front panel LED indicators display the switch position and power status.
Switch position and connection through the switch are maintained during power loss.
Attractive anodized black box packaging provides EMI/RFI shielding.
Custom length DB15 cables available for your switch installation.

Specifications:
PORT CONNECTORS: (5) DB15 female connectors labeled
A, B, C, D, and COMMON.
DISPLAY: (5) Front panel LED's display switch position and power status.
REMOTE CONTROL: (1) HD15 female connector on rear panel accepts
Contact Closure transition signals for Remote Control operation.
POWER: UL approved wall mount 120VAC, 60Hz power module supplies
12 VDC, 500 mA to the unit.
DIMENSIONS: Desktop Configuration, 7.75" W x 2.82" H x 7.25" D.
(19.7 x 7.2 x 18.4 cm)
WEIGHT: Approximately 3.5 lbs. (1.6 Kg)

Option: Wide Range Power Supply:
(Cat No. 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50/60Hz in place of the standard 115 VAC or 120 VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2115

The Model 7300 Single Channel RS232/RS530 A/B Switch with Fallback & Remote Control Port

Automatic Switch to Backup via Data Activity and Data Carrier Monitor
Switch Position and Switch Model Can Be Remotely Controlled

Introduction:
The PathWay® Model 7300 Single Channel RS232/RS530 A/B Switch with Fallback and Remote Control Port allows the user the capability of sharing a single port interface device connected to the COMMON port among two other devices connected to the A and B ports with remote access functionality. The remote port can be used to attain switch position status by using the provided set of contact closure pins. The remote port can also be used to control the switch position and mode using a separate set of contact closure pins.

When in automatic fallback mode the unit monitors either RD activity or DCD presence on port A only. If activity or presence of the selected trigger signal (RD or DCD) is detected on Port A, the unit switches to the A Position and stays in this position while there is still activity or presence detected. If activity or presence of the selected trigger signal (RD or DCD) is lost on Port A, the unit switches to the B Position and stays in this position until activity or presence is detected on Port A. The user can override automatic fallback operation from the front panel or remote port and force the unit to operate as an A/B switch.

Features:

Switch to backup automatically via Data Activity or DCD trigger monitor. Switches back when signals restore.
The switch ports are transparent to all data.
All pins of the DB25 interface are switched.
All switched signals are passed via latching copper contact relays that maintain their position and continuity even in the event of a power loss or failure.
When power is restored, the unit loads previous position and mode of operation and checks DIP switch settings and remote port to determine the correct startup configuration.
Automatic switching based on either RD activity or DCD presence.
Automatic switching compatible with RS232 or RS530 protocols.
Remote control of the switch position and mode from a contact closure REMOTE port.
Reading of the current switch position from a contact closure remote port.
Front panel LED's display position, mode, and power status.

Approvals:Certified compliant with EMC Regulations:EN 55022:2006/A1:2007 Class A ITE Emissions Requirements (EU).
ICES-003 Issue 4 Class A Digital Apparatus Emissions Requirements (Canada).FCC 47 CFR Part 15 Class A Emissions Requirements (USA).
Certified compliant with Safety Regulation:EN 60950-1 including deviations to UL/CSA 60950-1 2nd edition.

Specifications:
CONNECTORS: (3) DB25(F) connectors on rear panel labeled A, B, and COMMON.
FRONT PANEL CONTROLS: Manual pushbutton allows alternate action A/B switching when in manual mode.
REMOTE CONTROL: (1) DB15(F) connector on rear panel accepts contact closure signals from Model 4077, Cat No. 514077 or similar device.
FRONT PANEL DISPLAY: (2) LED's labeled A and B display switch position and power status.
POWER: UL approved 120VAC, 60 Hz wall mount power module supplies 12 VDC, 500mA to the unit.
DIMENSIONS: Rackmount, 19.0"W x 1.75"H x 8.0"D. (48.3 x 4.4 x 20.3 cm)
WEIGHT: Approx. 4.9 lbs. (2.2 Kg)

OPTION: Wide Range Power Module
(Cat No 517277) CE and UL listed table mount power module, 100VAC/240VAC, 50Hz/60Hz in place of standard 115VAC or 120VAC power module. Ideal for international applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2143

Model 7229 Dual Channel DB25/X.21 BIS Interface A/B Switch with Serial Remote Control

Applicable to ANY DB25 interface including DB25/X.21 BIS

Each channel of the PathWay Model 7229 allows the user the capability of sharing a DB25/X.21 BIS Interface device connected to the Common port connector between two other X.21 BIS Interface devices connected to the A and B ports.

The switch may be controlled locally by manually operating the front-panel pushbutton ore remotely from a DB9 female serial interface Remote port located on the rear of the unit.

Local switching is achieved by simply pressing the front-panel pushbuttons. The switch will change to the newly selected position as indicated by the front panel LED's. One channel can be made the Master channel and can be used to control the switching of both channels.

Features:

Each channel allows quick connection to any one of two DB25/X.21 BIS Interface devices from one COMMON device.
Switches all 25 pins of the DB25 interface.
Eliminates the need to plug and unplug cables.
Transparent to data speed and format.
Local control via front-panel pushbutton.
Remote control port allows off-site monitoring and switch management.
The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control and monitoring.
Front panel pushbutton control can be locked out remotely.
Front panel LED's display switch position and power status.
Retains last switch position in the event of a power loss and continues to pass data.
Attractive anodized black box packaging provides EMI/RFI shielding.
A wide range UL approved power module is supplied with the unit (100VAC/240VAC, 50Hz/60 Hz) to cover North American and European applications.
Custom length DB25 cables available for your switch installation.

SPECIFICATIONS:
Port Connectors: Each channel has (3) DB25 (F) connectors labeled A, B, and COMMON.
Front Panel Control: (2) Manual pushbuttons allow for local switching.
Display: (4) Front panel LED's display switch position and power status.
Remote Control: (1) DB9(F) connector on rear panel accepts RS232 Serial Data for remote control operation.
Power: UL approved 100VAC/240VAC, 50Hz/60Hz table mount power module supplies 12 VDC, 500mA to the unit. This is a wide range power module to cover North American and European Applications.

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2133

Model 9458 Quad Channel RJ45 CAT5e A/B/Offline Switch, Manual, Simultaneous Switching, Rackmount

The Model 9458 is a quad-channel RJ45 CAT5e A/B/Offline switch. All four channels switch simultaneously between positions A, B, and Offline.

FEATURES:

Each channel allows access to two CAT5e RJ45 networks from one COMMON network or device
Secure Off-Line switch position
The switch ports are transparent to all data
All pins of the RJ45 interface are switched
Interface meets CAT5e performance
Simultaneously switches all four channels via front-panel rotary switch
High quality sealed switch with self-wiping precious metal contacts
Eliminates the need to plug and unplug cables
No external power is required
Rackmount configuration
Attractive anodized black box packaging provides EMI/RFI shielding
Lifetime guarantee against manufacturing defects
Custom length CAT5e cables are available for switch installation
Dimensions: Rackmount 19" X x 1.75" H x 8" D (48.3 x 4.4 x 20.3 cm)
Weight: Approx 2.0 lbs. (0.9 Kg)

Additional Info: http://www.electrostandards.com/ProductDetail/?productid=2289

Home \| Log In List Company	Search:
Newsroom \| Newsletters \| Blog Contact Us
Marketing Solutions